[[Super Site Tower]] 
[[Super Site LI-COR Parts Inventory]]

====Visits====
* [[SS Jan 2011 Trip 1]]
* [[SS Feb 2011 Trip 1]]
* [[SS Mar 2011 Trip 1]]
* [[SS Mar 2011 Trip 2]]
* [[SS June/Jul 2011 Trip 1]]
* [[SS May 2016 Trip 1]]
* [[SS August 2016 Trip 1]]
* [[SS Site Visit 2017-08-03]]
* [[SS Site Visit 2017-09-12]]
* [[SS Site Visit 2017-09-26]]
* [[SS Site Visit 2017-10-13]]
* [[SS Site Visit 2017-12-15]]
* [[SS Site Visit 2018-03-03]]
* [[SS Site Visit 2018-03-22]]
* [[SS Site Visit 2018-04-18]]
* [[SS Site Visit 2018-05-01 to 04]]
* [[SS Site Visit 2018-05-22]]
* [[SS Site Visit 2018-07-02]]
* [[SS Site Visit 2018-07-06]]
* [[SS Site Visit 2018-07-21]]
* [[SS Site Visit 2018-08-01]]
* [[SS To Do Next Visit]]

===Current Programs===
CSI Signature Values on 2014-08-11... checked from Dropbow/Logger_programs/super-site/:

==> SS_Diag_Diagnostic.dat <==
"TOA5","SS_Diag","CR1000","29724","CR1000.Std.20","CPU:ss_diag_2011-01-25.CR1","30274","Diagnostic"
30274 ss_diag_2011-01-25.CR1

==> SS_Eco_1_AirTemps.dat <==
"TOA5","SS_Eco_1","CR1000","13604","CR1000.Std.22","CPU:ss_eco1_2012-07-10.CR1","10119","AirTemps"
10119 ss_eco1_2012-07-10.CR1

==> SS_HeatFlux_1_Diagnostic.dat <==
"TOA5","SS_HeatFlux_1","CR1000","47954","CR1000.Std.24","CPU:ss_hf_2012-10-09.CR1","31220","Diagnostic"
31220 ss_hf_2012-10-09.CR1

==> SS_Met_AirTemps.dat <==
"TOA5","SS_Met","CR1000","30801","CR1000.Std.20","CPU:ss_met_2013-03-06.CR1","47292","AirTemps"
47292 ss_met_2013-03-06.CR1

==> SS_SnowTemp_Diagnostic.dat <==
"TOA5","SS_SnowTemp","CR1000","22972","CR1000.Std.16","CPU:ss_snow_pro_2011-10-10.CR1","19271","Diagnostic"
19271 ss_snow_pro_2011-10-10.CR1

==> SS_Soil_Diagnostic.dat <==
"TOA5","SS_Soil","CR1000","29723","CR1000.Std.20","CPU:ss_soil_2010-11-03.CR1","11488","Diagnostic"
11488 ss_soil_2010-11-03.CR1

===PFA Cameras===
user: pfa

This is the tower uplooking Serial to USB converter:
root@pfa-CF-AX3SEGJR:/home/PFA_/public_html/original/dc# udevadm info -a -n /dev/ttyUSB0 | grep '{serial}' | head -n1
ATTRS{serial}=="0000:00:14.0"

Forest Floor: /dev/serial/by-path/pci-0000:00:14.0-usb-0:1:1.0-port0
Tower Top: /dev/serial/by-path/pci-0000:00:14.0-usb-0:2:1.0-port0

If you see a message like this in the logs:
Error 10003: eph_waitsig got -2
The camera is probably not turned on. To power on the tower top camera, press the button on the beige box for 2-3 seconds. To turn on the Forest Floor camera you will need to open the domed box and physically turn the power on. 

Images recorded on the cron schedule show here:
* http://monitors.iarc.uaf.edu/poker-flat-research-range/cameras.php
Manually recorded measurements, such as when running the scrip from a terminal window, show up here:
/home/PFA_/public_html/original/dc

===Computers currently at Shed (7/2017)===
* Eddy Flux Tower Top Toughbook CF-31
** 64 bit Windows 7
** hostname: ''tower''
** purpose: log & manage tower top LICOR 7200
* Eddy Flux Forest Floor Toughbook CF-31
** 64 bit Windows 7
** hostname: ''ForestFloor''
** purpose: log & manage forest floor LICOR 7200
* ss-main Toughbook cf-19
** Debian
** hostname: ss-main
** purpose: logs super-site met etc. CR1000 systems
* DTS Toughbook CF-19
** Windows 7
** hostname: ''dts-jics-PC''
** purpose: log & manage DTS system
* MS700 Hyperspectral computer: Sony Vaio laptop
** Japanese Windows 10
** hostname: ''JAMSTECVAIO''
** purpose: LoggerNet for MS700 CR3000 logger
* All Sky Cam Laptop
** Ubuntu 16.04
** hostname: ''pfa-CF-AX3SEGJR''
** purpose: downloads images from up & down looking cameras
* Fiberswitch Small Dell Notepad
** Windows 10
** hostname: ''DELL-HK''
** purpose: manages HR400 system
* JICS PC#1 Toshiba Laptop
** Windows 7
** hostname: ''JICS1-PC''
** purpose: Dropbox backup at the moment for Eddy Flux data
====Other Computer Items====
* Hawking Technology Wireless Access Point
** Signal ID: SS_Wifi
* Ubiquiti M2 Bullet
** Located at tower top w/ power of ethernet injector in shed, this is our access to the Poker Internet Infrastructure.
* Net Gear 16 Port 10/100 Switch
===Forest Floor Flux Bonus info===
* batch file to automove data to dropbox:
move c:\users\user\documents\* "C:\Users\user\Dropbox (JAMSTEC_PFRRdata)\pfrrflux\usprr_flux_original\archive_rawflux\floor\2018\"
* scheduled task set up to run this daily.

===Tower Flux Bonus info===
* Use this batch file to transfer flux data to dropbox:
move c:\users\user\documents\* "C:\Users\user\Dropbox (JAMSTEC_PFRRdata)\PFRRflux\USprr_Flux_Original\Archive_rawflux\Tower\2018\7200RS\"

* Winscp script set up plus batch file running through task scheduler to transfer data from ss-met to dropbox:
"C:\Program Files (x86)\WinSCP\WinSCP.com" /script="c:\users\user\scripting\winscp_metdata.txt"

* contents of '''winscp_metdata.txt'''
open sftp://192.168.10.110
synchronize local "C:\Users\user\Dropbox (JAMSTEC_PFRRdata)\PFRRflux\USprr_Flux_Original\MeteorologicalData\Met" /var/opt/CampbellSci/LoggerNet/4.1/SS_Met
synchronize local "C:\Users\user\Dropbox (JAMSTEC_PFRRdata)\PFRRflux\USprr_Flux_Original\MeteorologicalData\Soil" /var/opt/CampbellSci/LoggerNet/4.1/SS_Soil
exit
* Current raw archive:
C:\Users\user\Dropbox (JAMSTEC_PFRRdata)\PFRRflux\USprr_Flux_Original\Archive_rawflux\Tower\2018\7200RS

* Both of these batch files run as separate scheduled tasks under Task scheduler.
** Met data transfers at 9:10 AK STD
** Flux data transfers at 1:08 AK STD

===Older Content===

Here's a page started by Bob. Not sure how often I'll be adding stuff but it's been on my to-do list. Thought I'd start with packages added to the toughbook.
===COTS network system===
It's not the cheapest way to go but I thought going for commercial hardware for the network components would be the way to go. We'll see once the site is operational for a winter or two. Presently, what I have going on is something like this:

This antenna picks up WiFi from a building at PFRR: 
[http://www.radiolabs.com/products/antennas/2.4gig/backfire.php RadioLabs very directional antenna] 

This WiFi adapter has a linux compatible chipset and was easy to setup: 
[http://www.radiolabs.com/products/wireless/wave-magnum.php RadioLabs Magnum II USB Adapter] 
This powered USB extender (extend using ethernet cable from box to box) allows the usb wifi adapter to be up on the tower, minimizing the coax losses on the run to the antenna: 
[http://www.networktechinc.com/usbc5.html XTENDEX USB-C5-CE] 
I picked up some underground burial suitable Cat5E to go from the computer usb extender to the tower usb extender: 
[http://www.buy.com/prod/75ft-outdoor-waterproof-cat5e-ethernet-cable-direct-burial/q/sellerid/18349122/loc/101/211959049.html purchase link] 
So those items combine to get you to the computer.

I have two CSI white boxes. One to house the computer and one to house the tower USB & WiFi stuff. Each is lined with blueboard, sealed with duct seal, and has some extra desiccant to keep it dry, hopefully warm enough in the cold, time will tell on that though. I'll crunch the numbers at some point to see how much heat is being generated / how quickly it's dissipating.
I don't expect to need to use the toughbook directly, should be available for sshing from UAF proper or via wired ethernet onsite but on the off chance I do need to connect locally, I have a VGA adapter connected to the computer and will leave a surplussed CRT monitor out at the site. Connection to the laptop will be via a bluetooth keyboard/touchpad combo: 
[http://www.mwave.com/mwave/skusearch_v3.asp?scriteria=5177008&pagetitle=Solidtek%20KB-3962B-BT%20Mini%20Bluetooth%20Wireless%20Keyboard%20B purchase link] 

The computer is then connected to a network switch. This allows it to connect to the local NL100 and handle any local DHCP traffic. Probably a future upgrade will be a wireless bridge to allow other computers access to the internet / reduce the amount of brittle cabling laying about in the shed. See below for information and particulars of the software setup.

====Toughbook Setup====
Stock Debian with a few extra packages installed like Numpy, TeamViewer, LoggerNet for Linux

Currently use a Ubiqiti device to provide local network accesss.
192.168.10.x subnet I think.

====PakBus etc.====
Computer MD485:
RS485 & RS232 Active
RS485@ 38k
RS232@ 115.2k

Logger MD485s are setup:
RS485 & CSI/O active
CSI/O Mode -- Modem Enabled
Transparent communication mode
CSI/O @ 38k
RS485 @ 38k

Data loggers:
add-device pakbus-port {PakBusPort} as-child {ComPort};
add-device CR1000 {SS_Met} as-child {PakBusPort}; (420)
add-device CR1000 {SS_Soil} as-child {PakBusPort}; (421)
add-device CR1000 {SS_Diag} as-child {PakBusPort}; (422)
add-device CR1000 {SS_SnowTemp} as-child {PakBusPort}; (424)
add-device CR1000 {SS_Eco_1} as-child {PakBusPort}; (423)
add-device CR1000 {SS_HeatFlux_1} as-child {PakBusPort}; (425)

====Field Visit Checklists====

SS To Do Next Visit

2018-07-07T04:56:25Z

137.229.18.212: /* 2018 */

SS To Do Next Visit

2018-07-07T04:49:35Z

137.229.18.212: /* 2018 */

SS Site Visit 2018-07-06

2018-07-07T04:48:41Z

137.229.18.212: Created page with "* installed smartflux 2 on forest floor site * installed anemometer on forest floor site * 12.5k ohms for tower CNR4 radiometer ** wire at logger was loose so check to see if..."

* installed smartflux 2 on forest floor site
* installed anemometer on forest floor site
* 12.5k ohms for tower CNR4 radiometer
** wire at logger was loose so check to see if this fixes issue.
* modified config on forest floor laptop
* swapped out wifi dish on tower

Super-Site

2018-07-07T04:46:57Z

137.229.18.212: /* Visits */

[[Super Site Tower]] 
[[Super Site LI-COR Parts Inventory]]

====Visits====
[[SS Site Visit 2017-08-03]]

[[SS Site Visit 2017-09-12]]

[[SS Site Visit 2017-09-26]]

[[SS Site Visit 2017-10-13]]

[[SS Site Visit 2017-12-15]]

[[SS Site Visit 2018-03-03]]

[[SS Site Visit 2018-03-22]]

[[SS Site Visit 2018-04-18]]

[[SS Site Visit 2018-05-01 to 04]]

[[SS Site Visit 2018-05-22]]

[[SS Site Visit 2018-07-02]]

[[SS Site Visit 2018-07-06]]

[[SS To Do Next Visit]]

===Current Programs===
CSI Signature Values on 2014-08-11... checked from Dropbow/Logger_programs/super-site/:

==> SS_Diag_Diagnostic.dat <==
"TOA5","SS_Diag","CR1000","29724","CR1000.Std.20","CPU:ss_diag_2011-01-25.CR1","30274","Diagnostic"
30274 ss_diag_2011-01-25.CR1

==> SS_Eco_1_AirTemps.dat <==
"TOA5","SS_Eco_1","CR1000","13604","CR1000.Std.22","CPU:ss_eco1_2012-07-10.CR1","10119","AirTemps"
10119 ss_eco1_2012-07-10.CR1

==> SS_HeatFlux_1_Diagnostic.dat <==
"TOA5","SS_HeatFlux_1","CR1000","47954","CR1000.Std.24","CPU:ss_hf_2012-10-09.CR1","31220","Diagnostic"
31220 ss_hf_2012-10-09.CR1

==> SS_Met_AirTemps.dat <==
"TOA5","SS_Met","CR1000","30801","CR1000.Std.20","CPU:ss_met_2013-03-06.CR1","47292","AirTemps"
47292 ss_met_2013-03-06.CR1

==> SS_SnowTemp_Diagnostic.dat <==
"TOA5","SS_SnowTemp","CR1000","22972","CR1000.Std.16","CPU:ss_snow_pro_2011-10-10.CR1","19271","Diagnostic"
19271 ss_snow_pro_2011-10-10.CR1

==> SS_Soil_Diagnostic.dat <==
"TOA5","SS_Soil","CR1000","29723","CR1000.Std.20","CPU:ss_soil_2010-11-03.CR1","11488","Diagnostic"
11488 ss_soil_2010-11-03.CR1

===PFA Cameras===
user: pfa

This is the tower uplooking Serial to USB converter:
root@pfa-CF-AX3SEGJR:/home/PFA_/public_html/original/dc# udevadm info -a -n /dev/ttyUSB0 | grep '{serial}' | head -n1
ATTRS{serial}=="0000:00:14.0"

Forest Floor: /dev/serial/by-path/pci-0000:00:14.0-usb-0:1:1.0-port0
Tower Top: /dev/serial/by-path/pci-0000:00:14.0-usb-0:2:1.0-port0

If you see a message like this in the logs:
Error 10003: eph_waitsig got -2
The camera is probably not turned on. To power on the tower top camera, press the button on the beige box for 2-3 seconds. To turn on the Forest Floor camera you will need to open the domed box and physically turn the power on. 

Images recorded on the cron schedule show here:
* http://monitors.iarc.uaf.edu/poker-flat-research-range/cameras.php
Manually recorded measurements, such as when running the scrip from a terminal window, show up here:
/home/PFA_/public_html/original/dc

===Computers currently at Shed (7/2017)===
* Eddy Flux Tower Top Toughbook CF-31
** 64 bit Windows 7
** hostname: ''tower''
** purpose: log & manage tower top LICOR 7200
* Eddy Flux Forest Floor Toughbook CF-31
** 64 bit Windows 7
** hostname: ''ForestFloor''
** purpose: log & manage forest floor LICOR 7200
* ss-main Toughbook cf-19
** Debian
** hostname: ss-main
** purpose: logs super-site met etc. CR1000 systems
* DTS Toughbook CF-19
** Windows 7
** hostname: ''dts-jics-PC''
** purpose: log & manage DTS system
* MS700 Hyperspectral computer: Sony Vaio laptop
** Japanese Windows 10
** hostname: ''JAMSTECVAIO''
** purpose: LoggerNet for MS700 CR3000 logger
* All Sky Cam Laptop
** Ubuntu 16.04
** hostname: ''pfa-CF-AX3SEGJR''
** purpose: downloads images from up & down looking cameras
* Fiberswitch Small Dell Notepad
** Windows 10
** hostname: ''DELL-HK''
** purpose: manages HR400 system
* JICS PC#1 Toshiba Laptop
** Windows 7
** hostname: ''JICS1-PC''
** purpose: Dropbox backup at the moment for Eddy Flux data
====Other Computer Items====
* Hawking Technology Wireless Access Point
** Signal ID: SS_Wifi
* Ubiquiti M2 Bullet
** Located at tower top w/ power of ethernet injector in shed, this is our access to the Poker Internet Infrastructure.
* Net Gear 16 Port 10/100 Switch
===Forest Floor Flux Bonus info===
* batch file to automove data to dropbox:
move c:\users\user\documents\* "C:\Users\user\Dropbox (JAMSTEC_PFRRdata)\pfrrflux\usprr_flux_original\archive_rawflux\floor\2018\"
* scheduled task set up to run this daily.

===Tower Flux Bonus info===
* Use this batch file to transfer flux data to dropbox:
move c:\users\user\documents\* "C:\Users\user\Dropbox (JAMSTEC_PFRRdata)\PFRRflux\USprr_Flux_Original\Archive_rawflux\Tower\2018\7200RS\"

* Winscp script set up plus batch file running through task scheduler to transfer data from ss-met to dropbox:
"C:\Program Files (x86)\WinSCP\WinSCP.com" /script="c:\users\user\scripting\winscp_metdata.txt"

* contents of '''winscp_metdata.txt'''
open sftp://192.168.10.110
synchronize local "C:\Users\user\Dropbox (JAMSTEC_PFRRdata)\PFRRflux\USprr_Flux_Original\MeteorologicalData\Met" /var/opt/CampbellSci/LoggerNet/4.1/SS_Met
synchronize local "C:\Users\user\Dropbox (JAMSTEC_PFRRdata)\PFRRflux\USprr_Flux_Original\MeteorologicalData\Soil" /var/opt/CampbellSci/LoggerNet/4.1/SS_Soil
exit
* Current raw archive:
C:\Users\user\Dropbox (JAMSTEC_PFRRdata)\PFRRflux\USprr_Flux_Original\Archive_rawflux\Tower\2018\7200RS

* Both of these batch files run as separate scheduled tasks under Task scheduler.
** Met data transfers at 9:10 AK STD
** Flux data transfers at 1:08 AK STD

===Older Content===

Here's a page started by Bob. Not sure how often I'll be adding stuff but it's been on my to-do list. Thought I'd start with packages added to the toughbook.
===COTS network system===
It's not the cheapest way to go but I thought going for commercial hardware for the network components would be the way to go. We'll see once the site is operational for a winter or two. Presently, what I have going on is something like this:

This antenna picks up WiFi from a building at PFRR: 
[http://www.radiolabs.com/products/antennas/2.4gig/backfire.php RadioLabs very directional antenna] 

This WiFi adapter has a linux compatible chipset and was easy to setup: 
[http://www.radiolabs.com/products/wireless/wave-magnum.php RadioLabs Magnum II USB Adapter] 
This powered USB extender (extend using ethernet cable from box to box) allows the usb wifi adapter to be up on the tower, minimizing the coax losses on the run to the antenna: 
[http://www.networktechinc.com/usbc5.html XTENDEX USB-C5-CE] 
I picked up some underground burial suitable Cat5E to go from the computer usb extender to the tower usb extender: 
[http://www.buy.com/prod/75ft-outdoor-waterproof-cat5e-ethernet-cable-direct-burial/q/sellerid/18349122/loc/101/211959049.html purchase link] 
So those items combine to get you to the computer.

I have two CSI white boxes. One to house the computer and one to house the tower USB & WiFi stuff. Each is lined with blueboard, sealed with duct seal, and has some extra desiccant to keep it dry, hopefully warm enough in the cold, time will tell on that though. I'll crunch the numbers at some point to see how much heat is being generated / how quickly it's dissipating.
I don't expect to need to use the toughbook directly, should be available for sshing from UAF proper or via wired ethernet onsite but on the off chance I do need to connect locally, I have a VGA adapter connected to the computer and will leave a surplussed CRT monitor out at the site. Connection to the laptop will be via a bluetooth keyboard/touchpad combo: 
[http://www.mwave.com/mwave/skusearch_v3.asp?scriteria=5177008&pagetitle=Solidtek%20KB-3962B-BT%20Mini%20Bluetooth%20Wireless%20Keyboard%20B purchase link] 

The computer is then connected to a network switch. This allows it to connect to the local NL100 and handle any local DHCP traffic. Probably a future upgrade will be a wireless bridge to allow other computers access to the internet / reduce the amount of brittle cabling laying about in the shed. See below for information and particulars of the software setup.

===Toughbook Setup===
Stock Debian with a few extra packages installed like Numpy, TeamViewer, LoggerNet for Linux

Currently use a Ubiqiti device to provide local network accesss.
192.168.10.x subnet I think.

===Sensors===
''To Do''
# Figure out problems with Soil Moisture probes
# Figure out problem with soil heat flux plate
# Emailed [http://people.iarc.uaf.edu/~bbusey/pfrr_super-site/soil_probs.html this site] to CSI 11/30/2010.

===Local Network===
Subnet is 192.168.10.x 
Computer: Select DHCP or for static these are currently in use:
* 192.168.10.230
* 192.168.10.230
* 192.168.10.230
Subnet: 255.255.255.0 
Default Gateway: 192.168.10.20 
DNS: Your own preferred, or 192.168.10.20 

====PakBus etc.====
Computer MD485:
RS485 & RS232 Active
RS485@ 38k
RS232@ 115.2k

Logger MD485s are setup:
RS485 & CSI/O active
CSI/O Mode -- Modem Enabled
Transparent communication mode
CSI/O @ 38k
RS485 @ 38k

Data loggers:
add-device pakbus-port {PakBusPort} as-child {ComPort};
add-device CR1000 {SS_Met} as-child {PakBusPort}; (420)
add-device CR1000 {SS_Soil} as-child {PakBusPort}; (421)
add-device CR1000 {SS_Diag} as-child {PakBusPort}; (422)
add-device CR1000 {SS_SnowTemp} as-child {PakBusPort}; (424)
add-device CR1000 {SS_Eco_1} as-child {PakBusPort}; (423)
add-device CR1000 {SS_HeatFlux_1} as-child {PakBusPort}; (425)

====Field Visit Checklists====
* [[SS Jan 2011 Trip 1]]
* [[SS Feb 2011 Trip 1]]
* [[SS Mar 2011 Trip 1]]
* [[SS Mar 2011 Trip 2]]
* [[SS June/Jul 2011 Trip 1]]
* [[SS May 2016 Trip 1]]
* [[SS August 2016 Trip 1]]

SS Site Visit 2018-07-02

2018-07-03T01:41:35Z

137.229.18.212: Created page with "* Verified that the jamstec atv is in the proper storage * replaced the top four anemometers on the tower * need to dig out turck ethernet adapter for new eddy processor. * br..."

* Verified that the jamstec atv is in the proper storage
* replaced the top four anemometers on the tower
* need to dig out turck ethernet adapter for new eddy processor.
* bring out instrument box
* bring metric wrench for gill nuts/bolts
* bring out clipboard with wiring info for gill
* look again at LW data for tower top... I think the temperature cable isn't seated correctly.

===Anemometer Replacement===
* WS5
Removed: J10853
Replaced with: U16626
* WS6
Removed: J10854
Replaced with: U16628
* WS7
Removed: J10855
Replaced with: U16625
* WS8
Removed: J10856
Replaced with: U16627

* Leaving Waders at site.

Super-Site

2018-07-03T01:16:22Z

137.229.18.212: /* Visits */

[[Super Site Tower]] 
[[Super Site LI-COR Parts Inventory]]

====Visits====
[[SS Site Visit 2017-08-03]]

[[SS Site Visit 2017-09-12]]

[[SS Site Visit 2017-09-26]]

[[SS Site Visit 2017-10-13]]

[[SS Site Visit 2017-12-15]]

[[SS Site Visit 2018-03-03]]

[[SS Site Visit 2018-03-22]]

[[SS Site Visit 2018-04-18]]

[[SS Site Visit 2018-05-01 to 04]]

[[SS Site Visit 2018-05-22]]

[[SS Site Visit 2018-07-02]]

[[SS To Do Next Visit]]

===Current Programs===
CSI Signature Values on 2014-08-11... checked from Dropbow/Logger_programs/super-site/:

==> SS_Diag_Diagnostic.dat <==
"TOA5","SS_Diag","CR1000","29724","CR1000.Std.20","CPU:ss_diag_2011-01-25.CR1","30274","Diagnostic"
30274 ss_diag_2011-01-25.CR1

==> SS_Eco_1_AirTemps.dat <==
"TOA5","SS_Eco_1","CR1000","13604","CR1000.Std.22","CPU:ss_eco1_2012-07-10.CR1","10119","AirTemps"
10119 ss_eco1_2012-07-10.CR1

==> SS_HeatFlux_1_Diagnostic.dat <==
"TOA5","SS_HeatFlux_1","CR1000","47954","CR1000.Std.24","CPU:ss_hf_2012-10-09.CR1","31220","Diagnostic"
31220 ss_hf_2012-10-09.CR1

==> SS_Met_AirTemps.dat <==
"TOA5","SS_Met","CR1000","30801","CR1000.Std.20","CPU:ss_met_2013-03-06.CR1","47292","AirTemps"
47292 ss_met_2013-03-06.CR1

==> SS_SnowTemp_Diagnostic.dat <==
"TOA5","SS_SnowTemp","CR1000","22972","CR1000.Std.16","CPU:ss_snow_pro_2011-10-10.CR1","19271","Diagnostic"
19271 ss_snow_pro_2011-10-10.CR1

==> SS_Soil_Diagnostic.dat <==
"TOA5","SS_Soil","CR1000","29723","CR1000.Std.20","CPU:ss_soil_2010-11-03.CR1","11488","Diagnostic"
11488 ss_soil_2010-11-03.CR1

===PFA Cameras===
user: pfa

This is the tower uplooking Serial to USB converter:
root@pfa-CF-AX3SEGJR:/home/PFA_/public_html/original/dc# udevadm info -a -n /dev/ttyUSB0 | grep '{serial}' | head -n1
ATTRS{serial}=="0000:00:14.0"

Forest Floor: /dev/serial/by-path/pci-0000:00:14.0-usb-0:1:1.0-port0
Tower Top: /dev/serial/by-path/pci-0000:00:14.0-usb-0:2:1.0-port0

If you see a message like this in the logs:
Error 10003: eph_waitsig got -2
The camera is probably not turned on. To power on the tower top camera, press the button on the beige box for 2-3 seconds. To turn on the Forest Floor camera you will need to open the domed box and physically turn the power on. 

Images recorded on the cron schedule show here:
* http://monitors.iarc.uaf.edu/poker-flat-research-range/cameras.php
Manually recorded measurements, such as when running the scrip from a terminal window, show up here:
/home/PFA_/public_html/original/dc

===Computers currently at Shed (7/2017)===
* Eddy Flux Tower Top Toughbook CF-31
** 64 bit Windows 7
** hostname: ''tower''
** purpose: log & manage tower top LICOR 7200
* Eddy Flux Forest Floor Toughbook CF-31
** 64 bit Windows 7
** hostname: ''ForestFloor''
** purpose: log & manage forest floor LICOR 7200
* ss-main Toughbook cf-19
** Debian
** hostname: ss-main
** purpose: logs super-site met etc. CR1000 systems
* DTS Toughbook CF-19
** Windows 7
** hostname: ''dts-jics-PC''
** purpose: log & manage DTS system
* MS700 Hyperspectral computer: Sony Vaio laptop
** Japanese Windows 10
** hostname: ''JAMSTECVAIO''
** purpose: LoggerNet for MS700 CR3000 logger
* All Sky Cam Laptop
** Ubuntu 16.04
** hostname: ''pfa-CF-AX3SEGJR''
** purpose: downloads images from up & down looking cameras
* Fiberswitch Small Dell Notepad
** Windows 10
** hostname: ''DELL-HK''
** purpose: manages HR400 system
* JICS PC#1 Toshiba Laptop
** Windows 7
** hostname: ''JICS1-PC''
** purpose: Dropbox backup at the moment for Eddy Flux data
====Other Computer Items====
* Hawking Technology Wireless Access Point
** Signal ID: SS_Wifi
* Ubiquiti M2 Bullet
** Located at tower top w/ power of ethernet injector in shed, this is our access to the Poker Internet Infrastructure.
* Net Gear 16 Port 10/100 Switch
===Forest Floor Flux Bonus info===
* batch file to automove data to dropbox:
move c:\users\user\documents\* "C:\Users\user\Dropbox (JAMSTEC_PFRRdata)\pfrrflux\usprr_flux_original\archive_rawflux\floor\2018\"
* scheduled task set up to run this daily.

===Tower Flux Bonus info===
* Use this batch file to transfer flux data to dropbox:
move c:\users\user\documents\* "C:\Users\user\Dropbox (JAMSTEC_PFRRdata)\PFRRflux\USprr_Flux_Original\Archive_rawflux\Tower\2018\7200RS\"

* Winscp script set up plus batch file running through task scheduler to transfer data from ss-met to dropbox:
"C:\Program Files (x86)\WinSCP\WinSCP.com" /script="c:\users\user\scripting\winscp_metdata.txt"

* contents of '''winscp_metdata.txt'''
open sftp://192.168.10.110
synchronize local "C:\Users\user\Dropbox (JAMSTEC_PFRRdata)\PFRRflux\USprr_Flux_Original\MeteorologicalData\Met" /var/opt/CampbellSci/LoggerNet/4.1/SS_Met
synchronize local "C:\Users\user\Dropbox (JAMSTEC_PFRRdata)\PFRRflux\USprr_Flux_Original\MeteorologicalData\Soil" /var/opt/CampbellSci/LoggerNet/4.1/SS_Soil
exit
* Current raw archive:
C:\Users\user\Dropbox (JAMSTEC_PFRRdata)\PFRRflux\USprr_Flux_Original\Archive_rawflux\Tower\2018\7200RS

* Both of these batch files run as separate scheduled tasks under Task scheduler.
** Met data transfers at 9:10 AK STD
** Flux data transfers at 1:08 AK STD

===Older Content===

Here's a page started by Bob. Not sure how often I'll be adding stuff but it's been on my to-do list. Thought I'd start with packages added to the toughbook.
===COTS network system===
It's not the cheapest way to go but I thought going for commercial hardware for the network components would be the way to go. We'll see once the site is operational for a winter or two. Presently, what I have going on is something like this:

This antenna picks up WiFi from a building at PFRR: 
[http://www.radiolabs.com/products/antennas/2.4gig/backfire.php RadioLabs very directional antenna] 

This WiFi adapter has a linux compatible chipset and was easy to setup: 
[http://www.radiolabs.com/products/wireless/wave-magnum.php RadioLabs Magnum II USB Adapter] 
This powered USB extender (extend using ethernet cable from box to box) allows the usb wifi adapter to be up on the tower, minimizing the coax losses on the run to the antenna: 
[http://www.networktechinc.com/usbc5.html XTENDEX USB-C5-CE] 
I picked up some underground burial suitable Cat5E to go from the computer usb extender to the tower usb extender: 
[http://www.buy.com/prod/75ft-outdoor-waterproof-cat5e-ethernet-cable-direct-burial/q/sellerid/18349122/loc/101/211959049.html purchase link] 
So those items combine to get you to the computer.

I have two CSI white boxes. One to house the computer and one to house the tower USB & WiFi stuff. Each is lined with blueboard, sealed with duct seal, and has some extra desiccant to keep it dry, hopefully warm enough in the cold, time will tell on that though. I'll crunch the numbers at some point to see how much heat is being generated / how quickly it's dissipating.
I don't expect to need to use the toughbook directly, should be available for sshing from UAF proper or via wired ethernet onsite but on the off chance I do need to connect locally, I have a VGA adapter connected to the computer and will leave a surplussed CRT monitor out at the site. Connection to the laptop will be via a bluetooth keyboard/touchpad combo: 
[http://www.mwave.com/mwave/skusearch_v3.asp?scriteria=5177008&pagetitle=Solidtek%20KB-3962B-BT%20Mini%20Bluetooth%20Wireless%20Keyboard%20B purchase link] 

The computer is then connected to a network switch. This allows it to connect to the local NL100 and handle any local DHCP traffic. Probably a future upgrade will be a wireless bridge to allow other computers access to the internet / reduce the amount of brittle cabling laying about in the shed. See below for information and particulars of the software setup.

===Toughbook Setup===
Stock Debian with a few extra packages installed like Numpy, TeamViewer, LoggerNet for Linux

Currently use a Ubiqiti device to provide local network accesss.
192.168.10.x subnet I think.

===Sensors===
''To Do''
# Figure out problems with Soil Moisture probes
# Figure out problem with soil heat flux plate
# Emailed [http://people.iarc.uaf.edu/~bbusey/pfrr_super-site/soil_probs.html this site] to CSI 11/30/2010.

===Local Network===
Subnet is 192.168.10.x 
Computer: Select DHCP or for static these are currently in use:
* 192.168.10.230
* 192.168.10.230
* 192.168.10.230
Subnet: 255.255.255.0 
Default Gateway: 192.168.10.20 
DNS: Your own preferred, or 192.168.10.20 

====PakBus etc.====
Computer MD485:
RS485 & RS232 Active
RS485@ 38k
RS232@ 115.2k

Logger MD485s are setup:
RS485 & CSI/O active
CSI/O Mode -- Modem Enabled
Transparent communication mode
CSI/O @ 38k
RS485 @ 38k

Data loggers:
add-device pakbus-port {PakBusPort} as-child {ComPort};
add-device CR1000 {SS_Met} as-child {PakBusPort}; (420)
add-device CR1000 {SS_Soil} as-child {PakBusPort}; (421)
add-device CR1000 {SS_Diag} as-child {PakBusPort}; (422)
add-device CR1000 {SS_SnowTemp} as-child {PakBusPort}; (424)
add-device CR1000 {SS_Eco_1} as-child {PakBusPort}; (423)
add-device CR1000 {SS_HeatFlux_1} as-child {PakBusPort}; (425)

====Field Visit Checklists====
* [[SS Jan 2011 Trip 1]]
* [[SS Feb 2011 Trip 1]]
* [[SS Mar 2011 Trip 1]]
* [[SS Mar 2011 Trip 2]]
* [[SS June/Jul 2011 Trip 1]]
* [[SS May 2016 Trip 1]]
* [[SS August 2016 Trip 1]]

SS To Do Next Visit

2018-07-02T22:39:53Z

137.229.18.212:

===2018===
* Replace tower aspirator fans:
** https://catalog.orientalmotor.com/viewitems/mb-series-ac-centrifugal-fans-blowers/mb-series-50mm-centrifugal-fans-blowers
** I need to confirm that this unit is the correct one. The one I took a picture of operates at 110VAC but I think some of the others operate at a lower voltage.
* Deploy sensor refresh instruments from March.
** brought out 4pcs anemometers
* Buy a new HMP155 for forest floor site
* More PAR sensors and hardware for in-situ
* Buy another SI-111 SDI12 model
* Attend LI-COR training?
* Polish Battery Backup System
* replace Loggernet computer
* The tower wifi antenna needs replacing. Do this next visit. The coax is weathered and fraying.
* Submit PRs for Summer 2018 Instrument Recalibrations
** Vaisala HMP155s
** MetOne 010C
** Kipp & Zonen CNR4
* Late Fall recalibrations:
** LI7200RS
* XX Upgrade the smart flux 2 firmware on the tower
** figure out how to update smartflux eddypro settings
* look at longwave data from CNR4 because there is an issue of some sort.
* SS Heat FLux is off? Check power in the remote enclosure
* bring out an enclosure for smartflux 2
* bring out a turk ethernet connector

SS Site Visit 2018-05-22

2018-05-23T00:24:02Z

2017-12-15T22:57:05Z

137.229.18.212:

* Replaced Tower LI7200 and updated calibration & software both on unit and windows version
* reconnected power and tubing and everything looks good to me.
* removed fores floor LI7200
* removed forest floor CNR4
* added newly calibrated CNR4 to forest floor tripod
* sent new program with updated calibration coefficients for this CNR4 to the data logger
* left forest floor li7200 wires in place but covered with a bag
* for tools needed:
** phillips screwdriver
** campbell phillips screwdriver
** campbell flat screwdriver
** crescent wrench
** pocket scissors
** electrical tape
* left the vertical stud for the li7200 installed.
** the machine screws for it are in the shed on the forest floor toughbook
** brought back to town the air intake for this to keep it out of the weather.
* The tower wifi antenna needs replacing. Do this next visit. The coax is weathered and fraying.
* all met sensors look good.
* cleared snow off all sky cam

SS Site Visit 2017-12-15

2017-12-15T22:56:41Z

137.229.18.212: Created page with "* Replaced Tower LI7200 and updated calibration & software both on unit and windows version * reconnected power and tubing and everything looks good to me. * removed fores flo..."

Super-Site

2017-12-15T22:51:32Z

137.229.18.212: /* Visits */

[[Super Site Tower]]
====Visits====
[[SS Site Visit 2017-08-03]]

[[SS Site Visit 2017-09-12]]

[[SS Site Visit 2017-09-26]]

[[SS Site Visit 2017-10-13]]

[[SS Site Visit 2017-12-15]]

===Current Programs===
CSI Signature Values on 2014-08-11... checked from Dropbow/Logger_programs/super-site/:

==> SS_Diag_Diagnostic.dat <==
"TOA5","SS_Diag","CR1000","29724","CR1000.Std.20","CPU:ss_diag_2011-01-25.CR1","30274","Diagnostic"
30274 ss_diag_2011-01-25.CR1

==> SS_Eco_1_AirTemps.dat <==
"TOA5","SS_Eco_1","CR1000","13604","CR1000.Std.22","CPU:ss_eco1_2012-07-10.CR1","10119","AirTemps"
10119 ss_eco1_2012-07-10.CR1

==> SS_HeatFlux_1_Diagnostic.dat <==
"TOA5","SS_HeatFlux_1","CR1000","47954","CR1000.Std.24","CPU:ss_hf_2012-10-09.CR1","31220","Diagnostic"
31220 ss_hf_2012-10-09.CR1

==> SS_Met_AirTemps.dat <==
"TOA5","SS_Met","CR1000","30801","CR1000.Std.20","CPU:ss_met_2013-03-06.CR1","47292","AirTemps"
47292 ss_met_2013-03-06.CR1

==> SS_SnowTemp_Diagnostic.dat <==
"TOA5","SS_SnowTemp","CR1000","22972","CR1000.Std.16","CPU:ss_snow_pro_2011-10-10.CR1","19271","Diagnostic"
19271 ss_snow_pro_2011-10-10.CR1

==> SS_Soil_Diagnostic.dat <==
"TOA5","SS_Soil","CR1000","29723","CR1000.Std.20","CPU:ss_soil_2010-11-03.CR1","11488","Diagnostic"
11488 ss_soil_2010-11-03.CR1

===PFA Cameras===
user: pfa

This is the tower uplooking Serial to USB converter:
root@pfa-CF-AX3SEGJR:/home/PFA_/public_html/original/dc# udevadm info -a -n /dev/ttyUSB0 | grep '{serial}' | head -n1
ATTRS{serial}=="0000:00:14.0"

Forest Floor: /dev/serial/by-path/pci-0000:00:14.0-usb-0:1:1.0-port0
Tower Top: /dev/serial/by-path/pci-0000:00:14.0-usb-0:2:1.0-port0

If you see a message like this in the logs:
Error 10003: eph_waitsig got -2
The camera is probably not turned on. To power on the tower top camera, press the button on the beige box for 2-3 seconds. To turn on the Forest Floor camera you will need to open the domed box and physically turn the power on. 

Images recorded on the cron schedule show here:
* http://monitors.iarc.uaf.edu/poker-flat-research-range/cameras.php
Manually recorded measurements, such as when running the scrip from a terminal window, show up here:
/home/PFA_/public_html/original/dc

===LI7200 Cleaning supplies that are at shed===
* 4 pcs Scrub Bottle Kit, 7500 (p/n 7500-950)
* 2 pcs Swagelock Ferrule Set (p/n 300-10501)
* 3 pcs 5 Amp Fuse FAST (2 fuses per package) (p/n 439-04214)
* 2 pcs Tygon Tubing R3400 1/16" ID 1/8" OD (p/n 222-09579)
* 1 pcs O-Ring AS-020 Nitrile 70 (p/n 192-08408)
* 1 pcs Quick Connect (p/n 300-10455)
* 2 pcs Intake Screen (p/n 9972-043)
* 1 pcs Bev-a-Line Tubing (p/n 222-01824)
* 1 pcs Quick Connect 1/4" OD 3/8" OD (p/n 300-10771)
* 1 pcs LI7200 Thermocouple board (p/n 9972-007)
* 2 pcs bev-a-line tubing, 50 ft, 1/4" OD / 1/8" ID
====More misc. supplies====
* 2 12volt power supplies probably for a pump of some sort
* 1 Turck 3 piece 7200 cable p/n 9972-012
* 1 Turck 4 pin quick screw cable (bare wires other side... SDM?)
* 2 Turck 12 pin quick screw cable (bare wires other side)
* 2 Network cables 3 - 10 meters long

===Computers currently at Shed (7/2017)===
* Eddy Flux Tower Top Toughbook CF-31
** 64 bit Windows 7
** hostname: ''tower''
** purpose: log & manage tower top LICOR 7200
* Eddy Flux Forest Floor Toughbook CF-31
** 64 bit Windows 7
** hostname: ''ForestFloor''
** purpose: log & manage forest floor LICOR 7200
* ss-main Toughbook cf-19
** Debian
** hostname: ss-main
** purpose: logs super-site met etc. CR1000 systems
* DTS Toughbook CF-19
** Windows 7
** hostname: ''dts-jics-PC''
** purpose: log & manage DTS system
* MS700 Hyperspectral computer: Sony Vaio laptop
** Japanese Windows 10
** hostname: ''JAMSTECVAIO''
** purpose: LoggerNet for MS700 CR3000 logger
* All Sky Cam Laptop
** Ubuntu 16.04
** hostname: ''pfa-CF-AX3SEGJR''
** purpose: downloads images from up & down looking cameras
* Fiberswitch Small Dell Notepad
** Windows 10
** hostname: ''DELL-HK''
** purpose: manages HR400 system
* JICS PC#1 Toshiba Laptop
** Windows 7
** hostname: ''JICS1-PC''
** purpose: Dropbox backup at the moment for Eddy Flux data
====Other Computer Items====
* Hawking Technology Wireless Access Point
** Signal ID: SS_Wifi
* Ubiquiti M2 Bullet
** Located at tower top w/ power of ethernet injector in shed, this is our access to the Poker Internet Infrastructure.
* Net Gear 16 Port 10/100 Switch

===Older Content===

Here's a page started by Bob. Not sure how often I'll be adding stuff but it's been on my to-do list. Thought I'd start with packages added to the toughbook.
===COTS network system===
It's not the cheapest way to go but I thought going for commercial hardware for the network components would be the way to go. We'll see once the site is operational for a winter or two. Presently, what I have going on is something like this:

This antenna picks up WiFi from a building at PFRR: 
[http://www.radiolabs.com/products/antennas/2.4gig/backfire.php RadioLabs very directional antenna] 

This WiFi adapter has a linux compatible chipset and was easy to setup: 
[http://www.radiolabs.com/products/wireless/wave-magnum.php RadioLabs Magnum II USB Adapter] 
This powered USB extender (extend using ethernet cable from box to box) allows the usb wifi adapter to be up on the tower, minimizing the coax losses on the run to the antenna: 
[http://www.networktechinc.com/usbc5.html XTENDEX USB-C5-CE] 
I picked up some underground burial suitable Cat5E to go from the computer usb extender to the tower usb extender: 
[http://www.buy.com/prod/75ft-outdoor-waterproof-cat5e-ethernet-cable-direct-burial/q/sellerid/18349122/loc/101/211959049.html purchase link] 
So those items combine to get you to the computer.

I have two CSI white boxes. One to house the computer and one to house the tower USB & WiFi stuff. Each is lined with blueboard, sealed with duct seal, and has some extra desiccant to keep it dry, hopefully warm enough in the cold, time will tell on that though. I'll crunch the numbers at some point to see how much heat is being generated / how quickly it's dissipating.
I don't expect to need to use the toughbook directly, should be available for sshing from UAF proper or via wired ethernet onsite but on the off chance I do need to connect locally, I have a VGA adapter connected to the computer and will leave a surplussed CRT monitor out at the site. Connection to the laptop will be via a bluetooth keyboard/touchpad combo: 
[http://www.mwave.com/mwave/skusearch_v3.asp?scriteria=5177008&pagetitle=Solidtek%20KB-3962B-BT%20Mini%20Bluetooth%20Wireless%20Keyboard%20B purchase link] 

The computer is then connected to a network switch. This allows it to connect to the local NL100 and handle any local DHCP traffic. Probably a future upgrade will be a wireless bridge to allow other computers access to the internet / reduce the amount of brittle cabling laying about in the shed. See below for information and particulars of the software setup.

===Toughbook Setup===
Stock Debian with a few extra packages installed like Numpy, TeamViewer, LoggerNet for Linux

Currently use a Ubiqiti device to provide local network accesss.
192.168.10.x subnet I think.

===Sensors===
''To Do''
# Figure out problems with Soil Moisture probes
# Figure out problem with soil heat flux plate
# Emailed [http://people.iarc.uaf.edu/~bbusey/pfrr_super-site/soil_probs.html this site] to CSI 11/30/2010.

===Local Network===
Subnet is 192.168.10.x 
Computer: Select DHCP or for static these are currently in use:
* 192.168.10.230
* 192.168.10.230
* 192.168.10.230
Subnet: 255.255.255.0 
Default Gateway: 192.168.10.20 
DNS: Your own preferred, or 192.168.10.20 

====PakBus etc.====
Computer MD485:
RS485 & RS232 Active
RS485@ 38k
RS232@ 115.2k

Logger MD485s are setup:
RS485 & CSI/O active
CSI/O Mode -- Modem Enabled
Transparent communication mode
CSI/O @ 38k
RS485 @ 38k

Data loggers:
add-device pakbus-port {PakBusPort} as-child {ComPort};
add-device CR1000 {SS_Met} as-child {PakBusPort}; (420)
add-device CR1000 {SS_Soil} as-child {PakBusPort}; (421)
add-device CR1000 {SS_Diag} as-child {PakBusPort}; (422)
add-device CR1000 {SS_SnowTemp} as-child {PakBusPort}; (424)
add-device CR1000 {SS_Eco_1} as-child {PakBusPort}; (423)
add-device CR1000 {SS_HeatFlux_1} as-child {PakBusPort}; (425)

====Field Visit Checklists====
* [[SS Jan 2011 Trip 1]]
* [[SS Feb 2011 Trip 1]]
* [[SS Mar 2011 Trip 1]]
* [[SS Mar 2011 Trip 2]]
* [[SS June/Jul 2011 Trip 1]]
* [[SS May 2016 Trip 1]]
* [[SS August 2016 Trip 1]]

SS Site Visit 2017-10-13

2017-10-13T19:15:22Z

137.229.18.212: Created page with "Swap two more anemometers out. <pre> 010C @ 4.5m: Removed M7412 replaced with M7413 recalibrated on 9/22/2017 010C @ 6.0m: Removed M7411 replaced with M7414 recalibrated on 9/..."

Swap two more anemometers out.
<pre>
010C @ 4.5m: Removed M7412 replaced with M7413 recalibrated on 9/22/2017
010C @ 6.0m: Removed M7411 replaced with M7414 recalibrated on 9/22/2017

Super-Site

2017-10-13T19:05:42Z

137.229.18.212: /* Visits */

[[Super Site Tower]]
====Visits====
[[SS Site Visit 2017-08-03]]

[[SS Site Visit 2017-09-12]]

[[SS Site Visit 2017-09-26]]

[[SS Site Visit 2017-10-13]]

===Current Programs===
CSI Signature Values on 2014-08-11... checked from Dropbow/Logger_programs/super-site/:

==> SS_Diag_Diagnostic.dat <==
"TOA5","SS_Diag","CR1000","29724","CR1000.Std.20","CPU:ss_diag_2011-01-25.CR1","30274","Diagnostic"
30274 ss_diag_2011-01-25.CR1

==> SS_Eco_1_AirTemps.dat <==
"TOA5","SS_Eco_1","CR1000","13604","CR1000.Std.22","CPU:ss_eco1_2012-07-10.CR1","10119","AirTemps"
10119 ss_eco1_2012-07-10.CR1

==> SS_HeatFlux_1_Diagnostic.dat <==
"TOA5","SS_HeatFlux_1","CR1000","47954","CR1000.Std.24","CPU:ss_hf_2012-10-09.CR1","31220","Diagnostic"
31220 ss_hf_2012-10-09.CR1

==> SS_Met_AirTemps.dat <==
"TOA5","SS_Met","CR1000","30801","CR1000.Std.20","CPU:ss_met_2013-03-06.CR1","47292","AirTemps"
47292 ss_met_2013-03-06.CR1

==> SS_SnowTemp_Diagnostic.dat <==
"TOA5","SS_SnowTemp","CR1000","22972","CR1000.Std.16","CPU:ss_snow_pro_2011-10-10.CR1","19271","Diagnostic"
19271 ss_snow_pro_2011-10-10.CR1

==> SS_Soil_Diagnostic.dat <==
"TOA5","SS_Soil","CR1000","29723","CR1000.Std.20","CPU:ss_soil_2010-11-03.CR1","11488","Diagnostic"
11488 ss_soil_2010-11-03.CR1

===PFA Cameras===
user: pfa

This is the tower uplooking Serial to USB converter:
root@pfa-CF-AX3SEGJR:/home/PFA_/public_html/original/dc# udevadm info -a -n /dev/ttyUSB0 | grep '{serial}' | head -n1
ATTRS{serial}=="0000:00:14.0"

Forest Floor: /dev/serial/by-path/pci-0000:00:14.0-usb-0:1:1.0-port0
Tower Top: /dev/serial/by-path/pci-0000:00:14.0-usb-0:2:1.0-port0

If you see a message like this in the logs:
Error 10003: eph_waitsig got -2
The camera is probably not turned on. To power on the tower top camera, press the button on the beige box for 2-3 seconds. To turn on the Forest Floor camera you will need to open the domed box and physically turn the power on. 

Images recorded on the cron schedule show here:
* http://monitors.iarc.uaf.edu/poker-flat-research-range/cameras.php
Manually recorded measurements, such as when running the scrip from a terminal window, show up here:
/home/PFA_/public_html/original/dc

===LI7200 Cleaning supplies that are at shed===
* 4 pcs Scrub Bottle Kit, 7500 (p/n 7500-950)
* 2 pcs Swagelock Ferrule Set (p/n 300-10501)
* 3 pcs 5 Amp Fuse FAST (2 fuses per package) (p/n 439-04214)
* 2 pcs Tygon Tubing R3400 1/16" ID 1/8" OD (p/n 222-09579)
* 1 pcs O-Ring AS-020 Nitrile 70 (p/n 192-08408)
* 1 pcs Quick Connect (p/n 300-10455)
* 2 pcs Intake Screen (p/n 9972-043)
* 1 pcs Bev-a-Line Tubing (p/n 222-01824)
* 1 pcs Quick Connect 1/4" OD 3/8" OD (p/n 300-10771)
* 1 pcs LI7200 Thermocouple board (p/n 9972-007)
* 2 pcs bev-a-line tubing, 50 ft, 1/4" OD / 1/8" ID
====More misc. supplies====
* 2 12volt power supplies probably for a pump of some sort
* 1 Turck 3 piece 7200 cable p/n 9972-012
* 1 Turck 4 pin quick screw cable (bare wires other side... SDM?)
* 2 Turck 12 pin quick screw cable (bare wires other side)
* 2 Network cables 3 - 10 meters long

===Computers currently at Shed (7/2017)===
* Eddy Flux Tower Top Toughbook CF-31
** 64 bit Windows 7
** hostname: ''tower''
** purpose: log & manage tower top LICOR 7200
* Eddy Flux Forest Floor Toughbook CF-31
** 64 bit Windows 7
** hostname: ''ForestFloor''
** purpose: log & manage forest floor LICOR 7200
* ss-main Toughbook cf-19
** Debian
** hostname: ss-main
** purpose: logs super-site met etc. CR1000 systems
* DTS Toughbook CF-19
** Windows 7
** hostname: ''dts-jics-PC''
** purpose: log & manage DTS system
* MS700 Hyperspectral computer: Sony Vaio laptop
** Japanese Windows 10
** hostname: ''JAMSTECVAIO''
** purpose: LoggerNet for MS700 CR3000 logger
* All Sky Cam Laptop
** Ubuntu 16.04
** hostname: ''pfa-CF-AX3SEGJR''
** purpose: downloads images from up & down looking cameras
* Fiberswitch Small Dell Notepad
** Windows 10
** hostname: ''DELL-HK''
** purpose: manages HR400 system
* JICS PC#1 Toshiba Laptop
** Windows 7
** hostname: ''JICS1-PC''
** purpose: Dropbox backup at the moment for Eddy Flux data
====Other Computer Items====
* Hawking Technology Wireless Access Point
** Signal ID: SS_Wifi
* Ubiquiti M2 Bullet
** Located at tower top w/ power of ethernet injector in shed, this is our access to the Poker Internet Infrastructure.
* Net Gear 16 Port 10/100 Switch

===Older Content===

Here's a page started by Bob. Not sure how often I'll be adding stuff but it's been on my to-do list. Thought I'd start with packages added to the toughbook.
===COTS network system===
It's not the cheapest way to go but I thought going for commercial hardware for the network components would be the way to go. We'll see once the site is operational for a winter or two. Presently, what I have going on is something like this:

This antenna picks up WiFi from a building at PFRR: 
[http://www.radiolabs.com/products/antennas/2.4gig/backfire.php RadioLabs very directional antenna] 

This WiFi adapter has a linux compatible chipset and was easy to setup: 
[http://www.radiolabs.com/products/wireless/wave-magnum.php RadioLabs Magnum II USB Adapter] 
This powered USB extender (extend using ethernet cable from box to box) allows the usb wifi adapter to be up on the tower, minimizing the coax losses on the run to the antenna: 
[http://www.networktechinc.com/usbc5.html XTENDEX USB-C5-CE] 
I picked up some underground burial suitable Cat5E to go from the computer usb extender to the tower usb extender: 
[http://www.buy.com/prod/75ft-outdoor-waterproof-cat5e-ethernet-cable-direct-burial/q/sellerid/18349122/loc/101/211959049.html purchase link] 
So those items combine to get you to the computer.

I have two CSI white boxes. One to house the computer and one to house the tower USB & WiFi stuff. Each is lined with blueboard, sealed with duct seal, and has some extra desiccant to keep it dry, hopefully warm enough in the cold, time will tell on that though. I'll crunch the numbers at some point to see how much heat is being generated / how quickly it's dissipating.
I don't expect to need to use the toughbook directly, should be available for sshing from UAF proper or via wired ethernet onsite but on the off chance I do need to connect locally, I have a VGA adapter connected to the computer and will leave a surplussed CRT monitor out at the site. Connection to the laptop will be via a bluetooth keyboard/touchpad combo: 
[http://www.mwave.com/mwave/skusearch_v3.asp?scriteria=5177008&pagetitle=Solidtek%20KB-3962B-BT%20Mini%20Bluetooth%20Wireless%20Keyboard%20B purchase link] 

The computer is then connected to a network switch. This allows it to connect to the local NL100 and handle any local DHCP traffic. Probably a future upgrade will be a wireless bridge to allow other computers access to the internet / reduce the amount of brittle cabling laying about in the shed. See below for information and particulars of the software setup.

===Toughbook Setup===
Stock Debian with a few extra packages installed like Numpy, TeamViewer, LoggerNet for Linux

Currently use a Ubiqiti device to provide local network accesss.
192.168.10.x subnet I think.

===Sensors===
''To Do''
# Figure out problems with Soil Moisture probes
# Figure out problem with soil heat flux plate
# Emailed [http://people.iarc.uaf.edu/~bbusey/pfrr_super-site/soil_probs.html this site] to CSI 11/30/2010.

===Local Network===
Subnet is 192.168.10.x 
Computer: Select DHCP or for static these are currently in use:
* 192.168.10.230
* 192.168.10.230
* 192.168.10.230
Subnet: 255.255.255.0 
Default Gateway: 192.168.10.20 
DNS: Your own preferred, or 192.168.10.20 

====PakBus etc.====
Computer MD485:
RS485 & RS232 Active
RS485@ 38k
RS232@ 115.2k

Logger MD485s are setup:
RS485 & CSI/O active
CSI/O Mode -- Modem Enabled
Transparent communication mode
CSI/O @ 38k
RS485 @ 38k

Data loggers:
add-device pakbus-port {PakBusPort} as-child {ComPort};
add-device CR1000 {SS_Met} as-child {PakBusPort}; (420)
add-device CR1000 {SS_Soil} as-child {PakBusPort}; (421)
add-device CR1000 {SS_Diag} as-child {PakBusPort}; (422)
add-device CR1000 {SS_SnowTemp} as-child {PakBusPort}; (424)
add-device CR1000 {SS_Eco_1} as-child {PakBusPort}; (423)
add-device CR1000 {SS_HeatFlux_1} as-child {PakBusPort}; (425)

====Field Visit Checklists====
* [[SS Jan 2011 Trip 1]]
* [[SS Feb 2011 Trip 1]]
* [[SS Mar 2011 Trip 1]]
* [[SS Mar 2011 Trip 2]]
* [[SS June/Jul 2011 Trip 1]]
* [[SS May 2016 Trip 1]]
* [[SS August 2016 Trip 1]]

SS Site Visit 2017-09-12

2017-09-14T21:21:31Z

137.229.18.212:

Visited 9/12 and 9/14
* Check out 1m AT/RH
** 9/14 replaced with borrowed unit from toolik
* Bring out battery for UPS system
** double-check battery voltages next time out.
* toughbook
* replaced bottom two wind sensors with new units
* sending old units for recalibration
* Tour with Go
* put small toughbook on UPS system
* 9/14 changed all MD485s at site to Pakbus protocol rather than transparent to see if this helps with data retrieval using python.
* worked a bit on boardwalk
* pounded in grounding rod
* hooked second laptop to UPS

SS Site Visit 2017-08-03

2017-08-05T00:09:57Z

137.229.18.212:

* Reset All sky cameras... should think about moving them to a UPS....
* hauled out 12V batteries and battery charger for replacement backup system
** I think one battery may be too old.
* also brought out the cigarette adapters. IThere are two 12 Volt power supplies out there. One is 15 amps and the other is 19 amps.

* 8 010C Anemometers to calibrate
* 9 HMP155 AT/RH to calibrate
* SI111 is s/n 2517 made 26-Feb-2010
* Gill Instruments 1561-PK-020 ultrasonic anemometer
** forest floor s/n 100603

(and 8/4)
* swapped lowest AT/RH
* In: K4220036 2014 calibration (but never used)
* out: G4020001
* Reset HR4000 laptop.

2016-08-29T21:13:31Z

137.229.18.212:

SS May 2016 Trip 1

2016-05-19T20:31:32Z

137.229.18.212: Created page with "Stations offline due to heat flux logger adding security code. Need to talk to go about that. For now disconnected md485 cable to logger. * ground is dry enough to work on..."

Stations offline due to heat flux logger adding security code. Need to talk to go about that. For now disconnected md485 cable to logger.

* ground is dry enough to work on. So should order parts and work on wiring.
* should reinforce the anchors. One by shed needs attention.

* maybe grab dimensions of snow temp profile next time out
* disconnect thermal si111 next time out and bring back to town.
* think about adding an nl100 to replace connection on super site tough book serial port.
* then add some redundancy by putting in a second retrieval system. Another potential application for the python setup once it's running.

Super-Site

2016-05-19T20:22:31Z

137.229.18.212:

===Current Programs===
CSI Signature Values on 2014-08-11... checked from Dropbow/Logger_programs/super-site/:

==> SS_Diag_Diagnostic.dat <==
"TOA5","SS_Diag","CR1000","29724","CR1000.Std.20","CPU:ss_diag_2011-01-25.CR1","30274","Diagnostic"
30274 ss_diag_2011-01-25.CR1

==> SS_Eco_1_AirTemps.dat <==
"TOA5","SS_Eco_1","CR1000","13604","CR1000.Std.22","CPU:ss_eco1_2012-07-10.CR1","10119","AirTemps"
10119 ss_eco1_2012-07-10.CR1

==> SS_HeatFlux_1_Diagnostic.dat <==
"TOA5","SS_HeatFlux_1","CR1000","47954","CR1000.Std.24","CPU:ss_hf_2012-10-09.CR1","31220","Diagnostic"
31220 ss_hf_2012-10-09.CR1

==> SS_Met_AirTemps.dat <==
"TOA5","SS_Met","CR1000","30801","CR1000.Std.20","CPU:ss_met_2013-03-06.CR1","47292","AirTemps"
47292 ss_met_2013-03-06.CR1

==> SS_SnowTemp_Diagnostic.dat <==
"TOA5","SS_SnowTemp","CR1000","22972","CR1000.Std.16","CPU:ss_snow_pro_2011-10-10.CR1","19271","Diagnostic"
19271 ss_snow_pro_2011-10-10.CR1

==> SS_Soil_Diagnostic.dat <==
"TOA5","SS_Soil","CR1000","29723","CR1000.Std.20","CPU:ss_soil_2010-11-03.CR1","11488","Diagnostic"
11488 ss_soil_2010-11-03.CR1

===Older Content===

Here's a page started by Bob. Not sure how often I'll be adding stuff but it's been on my to-do list. Thought I'd start with packages added to the toughbook.
===COTS network system===
It's not the cheapest way to go but I thought going for commercial hardware for the network components would be the way to go. We'll see once the site is operational for a winter or two. Presently, what I have going on is something like this:

This antenna picks up WiFi from a building at PFRR: 
[http://www.radiolabs.com/products/antennas/2.4gig/backfire.php RadioLabs very directional antenna] 

This WiFi adapter has a linux compatible chipset and was easy to setup: 
[http://www.radiolabs.com/products/wireless/wave-magnum.php RadioLabs Magnum II USB Adapter] 
This powered USB extender (extend using ethernet cable from box to box) allows the usb wifi adapter to be up on the tower, minimizing the coax losses on the run to the antenna: 
[http://www.networktechinc.com/usbc5.html XTENDEX USB-C5-CE] 
I picked up some underground burial suitable Cat5E to go from the computer usb extender to the tower usb extender: 
[http://www.buy.com/prod/75ft-outdoor-waterproof-cat5e-ethernet-cable-direct-burial/q/sellerid/18349122/loc/101/211959049.html purchase link] 
So those items combine to get you to the computer.

I have two CSI white boxes. One to house the computer and one to house the tower USB & WiFi stuff. Each is lined with blueboard, sealed with duct seal, and has some extra desiccant to keep it dry, hopefully warm enough in the cold, time will tell on that though. I'll crunch the numbers at some point to see how much heat is being generated / how quickly it's dissipating.
I don't expect to need to use the toughbook directly, should be available for sshing from UAF proper or via wired ethernet onsite but on the off chance I do need to connect locally, I have a VGA adapter connected to the computer and will leave a surplussed CRT monitor out at the site. Connection to the laptop will be via a bluetooth keyboard/touchpad combo: 
[http://www.mwave.com/mwave/skusearch_v3.asp?scriteria=5177008&pagetitle=Solidtek%20KB-3962B-BT%20Mini%20Bluetooth%20Wireless%20Keyboard%20B purchase link] 

The computer is then connected to a network switch. This allows it to connect to the local NL100 and handle any local DHCP traffic. Probably a future upgrade will be a wireless bridge to allow other computers access to the internet / reduce the amount of brittle cabling laying about in the shed. See below for information and particulars of the software setup.

===Toughbook Setup===
Toughbook is a CF-19 (small one with the touchscreen)
# Install [http://www.ubuntu.com Ubuntu 10.10]
# Install [http://www.freedesktop.org/wiki/Software/xinput_calibrator Xinput Calibrator] as per suggestions [http://forum.notebookreview.com/panasonic/524581-ubuntu-10-10-toughbook-version.html here]
# Install [http://numpy.scipy.org/ Numpy]
# Install [http://git-scm.com/ Git]
# Install DHCP server for local network access on eth0 (wlan0, intel chipset installed on toughbook wasn't designed to serve as a wireless access point)
# Install DNS Masq for supplying dns to local network (eth0 only) [http://www.thekelleys.org.uk/dnsmasq/doc.html dnsmasq website]
# Manually configure IPTables for [https://help.ubuntu.com/community/Internet/ConnectionSharing internet connection sharing]
## See rules on internally accessed folder (must be within iarc.uaf.edu to view & not through browser)
# Install Loggernet for Linux
## Handy: [http://technodope.com/index.php?option=com_content&view=article&id=83:how-to-install-an-rpm-package-on-ubuntu&catid=50:unix&Itemid=78 this page on rpm to dem]
## Handy: [http://hayes.engr.uaf.edu:6152/projects/loggernet-linux/NOTES Ken's Notes]
## Handy: [http://linux.dell.com/files/openmanage-contributions/debian/debchanges.txt Redhat vs. Debian naming convention]
## Gist is to change the daemon command in '''csilgrnet''', '''csildmp''', '''csildep''' to something like this: ''start-stop-daemon --start --user loggernet --exec /opt/CampbellSci/LoggerNet/csilgrnet -- --run-as-daemon=true''
# LoggerNet isn't initially running at start. For [https://help.ubuntu.com/community/UbuntuBootupHowto ubuntu]:<pre> cd /etc/init.d; sudo update-rc.d myscript defaults 99 01</pre>
# clone git repositories for datapro tools
<pre> cd ~/.ssh
ssh-keygen -t rsa -C "bob"
cat ~/.ssh/id_rsa.pub
[paste key on github]
cd ~/working_files/bin/py_datapro/
git clone git@github.com:frankohanlon/DataPro.git</pre>
# sftp datapro configs
# Buy a bluetooth keyboard/mouse
# set up sshd
# set up keys w/ toughbook & iarc.server
# add sites to loggernet
# Add Internal Temperature monitoring for the toughbook see [http://www.cyberciti.biz/tips/howto-monitor-hard-drive-temperature.html Ref 1], and [http://www.cyberciti.biz/faq/howto-linux-get-sensors-information/ Ref 2]
CPU & case temperature monitoring:
sudo sensors-detect
sudo nano /etc/modules [insert the output from the previous step]
sudo modprobe coretemp
sensors

sudo apt-get install hddtemp
sudo hddtemp/dev/sda
sudo /home/bob/working_files/bin/computer_diag.sh
TB Temperature Logger Script:
<pre>
#!/bin/bash

aa=$(date +'"%G-%m-%d %H:00:00",')

temp1=$(grep 'temp1' /home/bob/working_files/ss_status/ss_current_temp.txt | cut -c13-18)
temp1=$aa$temp1
echo $temp1 >> /home/bob/working_files/ss_status/ss_temp1.csv

temp2=$(grep 'temp2' /home/bob/working_files/ss_status/ss_current_temp.txt | cut -c13-18)
temp2=$aa$temp2
echo $temp2 >> /home/bob/working_files/ss_status/ss_temp2.csv

temp3=$(grep 'Core 0' /home/bob/working_files/ss_status/ss_current_temp.txt | cut -c13-18)
temp3=$aa$temp3
echo $temp3 >> /home/bob/working_files/ss_status/ss_core0.csv

temp4=$(grep 'Core 1' /home/bob/working_files/ss_status/ss_current_temp.txt | cut -c13-18)
temp4=$aa$temp4
echo $temp4 >> /home/bob/working_files/ss_status/ss_core1.csv
</pre>
TB Wireless Signal Logger Script:
<pre>
#!/bin/bash

aa=$(date +'"%G-%m-%d %H:00:00",')

wire1=$(grep 'Link Quality' /home/bob/working_files/ss_status/ss_current_wireless.txt | cut -c24-25)
wire1=$aa$wire1
echo $wire1 >> /home/bob/working_files/ss_status/ss_link_quality.csv

wire2=$(grep 'Link Quality' /home/bob/working_files/ss_status/ss_current_wireless.txt | cut -c44-47)
wire2=$aa$wire2
echo $wire2 >> /home/bob/working_files/ss_status/ss_link_signal.csv
</pre>

Things running locally on the cron:
1 * * * * (/home/bob/working_files/bin/site_process.sh) > /home/bob/working_files/bin/site_cron_log.txt
5 0 * * 0 (/home/bob/working_files/bin/weekly_archive.sh) > /home/bob/working_files/bin/archive_cron_log.txt

===Sensors===
''To Do''
# Figure out problems with Soil Moisture probes
# Figure out problem with soil heat flux plate
# Emailed [http://people.iarc.uaf.edu/~bbusey/pfrr_super-site/soil_probs.html this site] to CSI 11/30/2010.

===Local Network===
I'd draw pictures if I knew how. Anyway:
* Small Toughbook gets internet over wlan1 from the Poker Flats facility over DHCP
* Out of eth0, the wired ethernet port, it acts as a DHCP server on the 192.168.1.1 address range.
* The site NL100 is set to 192.168.1.2
* The camera is set to _____
* There is a network switch so that other devices can also connect such as the eddy flux down the road.

====PakBus etc.====
Computer MD485:
RS485 & RS232 Active
RS485@ 38k
RS232@ 115.2k

Logger MD485s are setup:
RS485 & CSI/O active
CSI/O Mode -- Modem Enabled
Transparent communication mode
CSI/O @ 38k
RS485 @ 38k

Data loggers:
Super-Site Met (16 meter tower & radiation) -- PakBus ID 420
Super-Site Soil (Soil Pit, Heat Flux, Snow, Surface Temps) -- PakBus ID 421
Super-Site Power (Current Monitor & diagnostics) -- PakBus ID 422
Super-Site Eco1 (Ecosystem PAR & Vapor pressure) -- PakBus ID 423

If required for Plan B Freewave FGR radios are set up as:
CSI RF450 - Multipoint Master
+ RS232 @115.2k
+ S/N 882-5337
+ FreqKey 13
Freewave FGR-115RC - Multipoint slave
+ RS232 @ 115.2k
+ S/N 873-7563
+ FreqKey 13

====Field Visit Checklists====
[[SS Jan 2011 Trip 1]] 
[[SS Feb 2011 Trip 1]] 
[[SS Mar 2011 Trip 1]] 
[[SS Mar 2011 Trip 2]] 
[[SS June/Jul 2011 Trip 1]] 
[[SS May 2016 Trip 1]]