IARC 207 Wiki - User contributions [en]

Oliktok Winter 2017 trip

2017-11-29T22:27:35Z

137.229.92.185:

*calibrate sensors with water
*bring ruler
*measure distance below sr50a
*install new temp sensor
*update program
**new temp sensor
**extra VW
**card out
**save all the raw geonor values
*instal staff gauges to measure height in photos

Oliktok Winter 2017 trip

2017-11-20T21:58:17Z

137.229.92.185: Created page with "*calibrate sensors with water *bring ruler *measure distance below sr50a *install new temp sensor *update program **new temp sensor **extra VW **card out **save all the raw g..."

*calibrate sensors with water
*bring ruler
*measure distance below sr50a
*install new temp sensor
*update program
**new temp sensor
**extra VW
**card out
**save all the raw geonor values

Cherry ARM sites

2017-11-20T21:33:39Z

137.229.92.185:

== Barrow Site ==

For latest copy of program see Bob Busey's dropbox:
~/DropBox/logger_programs/barrow_arm/tps_barrow.cr1

[[Barrow ARM TPS Program]]

[[Barrow Oct 2016 trip]]

[[Barrow Summer 2017 trip]]

==Atqasuk Site ==

== Oliktok Site ==
[[Oliktok precip site]]

[[Oliktok summer 2017 trip]]

[[Oliktok Winter 2017 trip]]

Spring 2018 visit

2017-11-02T21:19:46Z

137.229.92.185:

*clean bottom of evap pan with scrubby (kitchen has lots if you forget one)
*fuse for logger
*reinstall BF5 sunshine sensor (I left it in the bottom drawer of the Met station cubby thing in the EDC)
*program changes
**add pluvio wiring to program notes
**fix wiring notes for HPM's on the CR1000
**for snow depth, store the raw measurement, not the temp corrected value twice
***and consider correcting the measured offset
**make sure all lapses in the data intervals are set to 10
*consider removing lake_TC wire and from program if we aren't measuring it

Spring 2018 visit

2017-10-12T21:49:30Z

137.229.92.185:

*clean bottom of evap pan with scrubby (kitchen has lots if you forget one)
*fuse for logger
*reinstall BF5 sunshine sensor (I left it in the bottom drawer of the Met station cubby thing in the EDC)
*program changes
**add pluvio wiring to program notes
**fix wiring notes for HPM's on the CR1000
**for snow depth, store the raw measurement, not the temp corrected value twice
***and consider correcting the measured offset
*consider removing lake_TC wire and from program if we aren't measuring it

Spring 2018 visit

2017-10-12T21:42:54Z

137.229.92.185:

*clean bottom of evap pan with scrubby (kitchen has lots if you forget one)
*fuse for logger
*reinstall BF5 sunshine sensor (I left it in the bottom drawer of the Met station cubby thing in the EDC)
*program changes
**add pluvio wiring to program notes
**fix wiring notes for HPM's on the CR1000
**for snow depth, store the raw measurement, not the temp corrected value twice
*consider removing lake_TC wire and from program if we aren't measuring it

2017 NGEE Nome October trip

2017-09-19T22:40:17Z

137.229.92.185: /* Loose Itinerary */

===Activities:===

* teller top:
** double-check data
** thermal conductivity probes working?
** maybe replace cnr4
*** and or drill out stripped screws
* teller bottom
** sr50a transducer replacement, 2x
** remove 1 PT
** discharge measurement
**
* Kougarok m64
** bring guy wire markers for K64 met station (at uaf storage)

===Loose Itinerary===
* 9/29 (8:18 - 9:36 Twilight to twilight)
** evening: arrive & stay in apartments
* 9/30 (8:21 - 9:19)
** take some storage stuff to dump
** evening: Lily arrives
** stay in hotel
* 10/1 (8:24 - 9:16)
* Teller
** walk the end point of the lines set up in March 2017 and remove the orange poles
** place 4 poles at bottom to help outline location of channel for PTs
* 10/2 (8:27 - 9:12)
** Teller button up for winter, snow pole remainder
** remove one PT at the bottom site
* 10/3 (8:30 - 9:09)
** drive to kougarok. download data over radios from K sites
** stretch goal... visit k2 if time for thaw depth measurements
* 10/4 (8:33 - 9:05)
** kougarok m64 winter button up
** ??? soil pit ???
** kougarok m64 finish surveying & deploy snow poles
* 10/5 (8:36 - 9:02)
* Council
** survey 2017 plots?
** download data
** visit C2?
** fix program at C1
* 10/6 depart

Fall 2017 visit

2017-09-19T21:42:43Z

137.229.92.185:

*Pluvio
**replace all older panels on the whyoming gauge
**antifreeze
**install UPS for pluvio?
**whats up with that heater anyways?

*winterize LTER thing (see email from seth)

*SR50a -replace transducer

*figure out PAR sensor issues
**fix lake sensor grounding
**organize thoughts about all the connectors

*fix wiring for ethernet in CPS hut

*remove bf5 for winter?

*fix garden cam?

* CNR4- replace desiccant

*check level on radiometers, especially Bf5 to decide if need a new mount.

*fuse for enclosure

*replace tarp on battery box

*winterize evap pan

*program changes
**add pluvio wiring to program notes

===to bring===
*zip ties of many sizes
*wires of many colors (especially red and black)
*tarp for battery box

*tools http://ngeedata.iarc.uaf.edu/wiki/Tool_list
*computer + charger
*field laptop + charger
*field book
*copy of wiki
hand warmers

Clothes
*raincoat
*rain pants
*sourdough jacket
*warm hats +ear warmers
*gloves and mittens
*blue muck boots
*fleece pants
*leggings
*orange fleece
*wool long sleeve
*socks, undies
*work pants
*insulated bibs

Other Gear
*sleeping bag
*earplugs

===To Do at TFS===
*snow Data
*provisional summer data
*respond to ed re web data
*cost of tower to bob

Fall 2017 visit

2017-09-18T19:28:44Z

137.229.92.185:

*Pluvio
**replace all older panels on the whyoming gauge
**UPS for Pluvio?
**antifreeze
**install UPS for pluvio?
**whats up with that heater anyways?

*winterize LTER thing (see email from seth)

*SR50a -replace transducer

*figure out PAR sensor issues
**fix lake sensor grounding
**organize thoughts about all the connectors

*fix wiring for ethernet in CPS hut

*remove bf5 for winter?

*fix garden cam?

* CNR4- replace desiccant

*check level on radiometers, especially Bf5 to decide if need a new mount.

*fuse for enclosure

*replace tarp on battery box

*winterize evap pan

*program changes
**add pluvio wiring to program notes

===to bring===
*zip ties of many sizes
*wires of many colors (especially red and black)
*tarp for battery box

*tools http://ngeedata.iarc.uaf.edu/wiki/Tool_list
*computer + charger
*field laptop + charger
*field book
*copy of wiki
hand warmers

Clothes
*raincoat
*rain pants
*sourdough jacket
*warm hats +ear warmers
*gloves and mittens
*blue muck boots
*fleece pants
*leggings
*orange fleece
*wool long sleeve
*socks, undies
*work pants
*insulated bibs

Other Gear
*sleeping bag
*earplugs

===To Do at TFS===
*snow Data
*provisional summer data
*respond to ed re web data
*cost of tower to bob

Fall 2017 visit

2017-09-18T19:24:35Z

137.229.92.185:

*Pluvio
**replace all older panels on the whyoming gauge
**UPS for Pluvio?
**antifreeze
**install UPS for pluvio?
**whats up with that heater anyways?

*winterize LTER thing (see email from seth)

*SR50a -replace transducer

*figure out PAR sensor issues
**fix lake sensor grounding
**organize thoughts about all the connectors

*fix wiring for ethernet in CPS hut

*remove bf5 for winter?

*fix garden cam?

* CNR4- replace desiccant

*check level on radiometers, especially Bf5 to decide if need a new mount.

*fuse for enclosure

*replace tarp on battery box

*winterize evap pan

*program changes
**add pluvio wiring to program notes

===to bring===
*zip ties of many sizes
*wires of many colors (especially red and black)
*tarp for battery box

*tools http://ngeedata.iarc.uaf.edu/wiki/Tool_list
*computer + charger
*field laptop + charger
*field book
*copy of wiki
hand warmers

Clothes
*raincoat
*rain pants
*sourdough jacket
*warm hats +ear warmers
*gloves and mittens
*blue muck boots
*fleece pants
*leggings
*orange fleece
*wool long sleeve
*socks, undies
*work pants
*insulated bibs

Other Gear
*sleeping bag
*earplugs

To Do at TFS
*snow Data
*provisional summer data
*respond to ed re web data

Fall 2017 visit

2017-09-14T00:28:01Z

137.229.92.185:

*Pluvio
**replace all older panels on the whyoming gauge
**UPS for Pluvio?
**antifreeze
**install UPS for pluvio?
**whats up with that heater anyways?

*SR50a -replace transducer

*figure out PAR sensor issues
**fix lake sensor grounding
**organize thoughts about all the connectors

*fix wiring for ethernet in CPS hut

*remove bf5 for winter?

*fix garden cam?

* CNR4- replace desiccant

*check level on radiometers, especially Bf5 to decide if need a new mount.

*fuse for enclosure

*replace tarp on battery box

*winterize evap pan

*program changes
**add pluvio wiring to program notes

===to bring===
*zip ties of many sizes
*wires of many colors (especially red and black)
*tarp for battery box

*tools http://ngeedata.iarc.uaf.edu/wiki/Tool_list
*computer + charger
*field laptop + charger
*field book
*copy of wiki
hand warmers

Clothes
*raincoat
*rain pants
*sourdough jacket
*warm hats +ear warmers
*gloves and mittens
*blue muck boots
*fleece pants
*leggings
*orange fleece
*wool long sleeve
*socks, undies
*work pants
*insulated bibs

Other Gear
*sleeping bag
*earplugs

Oliktok summer 2017 trip

2017-09-08T01:14:16Z

137.229.92.185: /* for telayna */

===for telayna===
*replace sr50a transducers
**1)unscrew sensor from mount
**2)unscrew cable from sensor
**3)unscrew all little screws holding the transducer to the sensor body (use the frisbee to work so you don't lose the little screws)
**4)unclip the wires of the old transducer, remove the O ring
**5)place desiccant in the new transducer
**5)place the new O ring on the sensor body and clip the new transducer wire
**6)line up the notch of the new transducer on the sensor body
**7)screw in all the little screws
**8)replace the sensor on the mount and screw in the cable (which is notched)

*put up temperature sensor
**1)mount it on the south side of the fence
**2)plug sensor into sensor head
**3)screw
**4)zip tie cable to make things neat
**5)unplug logger before wiring
**wiring to CR1000 logger
***Red -- SW-12
***yellow -- SE11
***blue -- SE12
***clear -- AG
***black -- AG
***white -- AG
**replace putty
**replace power to logger

*CFM100
**1)unplug power from logger
**2)plug and screw in the CFM100
**3)re-plug power to the logger
**4)insert card

*level geonor
**there are screws at the base
**need to remove cover to access them- and maybe bucket as well
**don't do this if it doesn't seem obvious

*visually inspect panes of LPM
**IF dirty: wipe them with a paper towel or the alcohol swabbies I sent with you

*tools i'm sending you with
**7/16 nut driver
**small flathead screw driver
**small Philips screw driver
**adjustable wrench
**channel locks

===other===
*antifreeze
*<s>snip vegetation underneath
**cable housing
*plastic cable covers for all cables entering into the logger?</s>

Oliktok summer 2017 trip

2017-09-07T23:47:18Z

137.229.92.185: /* =other */

===for telayna===
*replace sr50a transducers
**1)unscrew sensor from mount
**2)unscrew cable from sensor
**3)unscrew all little screws holding the transducer to the sensor body (use the frisbee to work so you don't lose the little screws)
**4)unclip the wires of the old transducer, remove the O ring
**5)place desiccant in the new transducer
**5)place the new O ring on the sensor body and clip the new transducer wire
**6)line up the notch of the new transducer on the sensor body
**7)screw in all the little screws
**8)replace the sensor on the mount and screw in the cable (which is notched)

*put up temperature sensor
**mount it as close to SR50a quadpod as possible
**wiring to CR1000 logger
**Red -- SW-12
**yellow -- SE11
**blue -- SE12
**clear -- AG
**black -- AG
**white -- AG

*CFM100
**1)unplug power from logger
**2)plug and screw in the CFM100
**3)re-plug power to the logger
**4)insert card

*level geonor
**there are screws at the base
**don't do this if it doesn't seem obvious

*tools i'm sending you with
**7/16 nut driver
**small flathead screw driver
**small Philips screw driver
**level

===other===
*antifreeze
*<s>snip vegetation underneath
**cable housing
*plastic cable covers for all cables entering into the logger?</s>

Oliktok summer 2017 trip

2017-09-07T22:52:12Z

137.229.92.185:

===for telayna===
*replace sr50a transducers
**1)unscrew sensor from mount
**2)unscrew cable from sensor
**3)unscrew all little screws holding the transducer to the sensor body (use the frisbee to work so you don't lose the little screws)
**4)unclip the wires of the old transducer, remove the O ring
**5)place desiccant in the new transducer
**5)place the new O ring on the sensor body and clip the new transducer wire
**6)line up the notch of the new transducer on the sensor body
**7)screw in all the little screws
**8)replace the sensor on the mount and screw in the cable (which is notched)

*put up temperature sensor
**mount it as close to SR50a quadpod as possible
**wiring to CR1000 logger
**Red -- SW-12
**yellow -- SE11
**blue -- SE12
**clear -- AG
**black -- AG
**white -- AG

*CFM100
**1)unplug power from logger
**2)plug and screw in the CFM100
**3)re-plug power to the logger
**4)insert card

*level geonor
**there are screws at the base
**don't do this if it doesn't seem obvious

*tools i'm sending you with
**7/16 nut driver
**small flathead screw driver
**small Philips screw driver
**level

====other===
*antifreeze
*snip vegetation underneath
**cable housing
*plastic cable covers for all cables entering into the logger?

Oliktok summer 2017 trip

2017-09-07T21:48:05Z

137.229.92.185:

===for telayna===
*replace sr50a transducers
**1)unscrew sensor from mount
**2)unscrew cable from sensor
**3)unscrew all little screws holding the transducer to the sensor body (use the frisbee to work so you don't lose the little screws)
**4)unclip the wires of the old transducer, remove the O ring
**5)place desiccant in the new transducer
**5)place the new O ring on the sensor body and clip the new transducer wire
**6)line up the notch of the new transducer on the sensor body
**7)screw in all the little screws
**8)replace the sensor on the mount and screw in the cable (which is notched)

*put up temperature sensor
**mount it as close to SR50a quadpod as possible
**wiring to CR1000 logger
**Red -- SW-12
**yellow -- SE11
**blue -- SE12
**clear -- AG
**black -- AG
**white -- AG

*CFM100
**1)unplug power from logger
**2)plug and screw in the CFM100
**3)re-plug power to the logger
**4)

*level geonor
**there are screws at the base
**don't do this if it doesn't seem obvious

*tools i'm sending you with
**7/16 nut driver
**small flathead screw driver
**small Philips screw driver
**level

====other===
*antifreeze
*snip vegetation underneath
**cable housing
*plastic cable covers for all cables entering into the logger?

Oliktok summer 2017 trip

2017-09-07T21:38:11Z

137.229.92.185:

===for telayna===
*replace sr50a transducers
**1)unscrew sensor from mount
**2)unscrew cable from sensor
**3)unscrew all little screws holding the transducer to the sensor body (use the frisbee to work so you don't lose the little screws)
**4)unclip the wires of the old transducer, remove the O ring
**5)place desiccant in the new transducer
**5)place the new O ring on the sensor body and clip the new transducer wire
**6)line up the notch of the new transducer on the sensor body
**7)screw in all the little screws
**8)replace the sensor on the mount and screw in the cable (which is notched)

*put up temperature sensor
**mount it as close to SR50a quadpod as possible
**wiring to CR1000 logger
**Red -- SW-12
**yellow -- SE11
**blue -- SE12
**clear -- AG
**black -- AG
**white -- AG

**cable housing
*plastic cable covers for all cables entering into the logger?

*CFM100
**1)unplug power from logger
**2)plug and screw in the CFM100
**3)re-plug power to the logger
**4)
*level geonor

*tools i'm sending you with
**7/16 nut driver
**small flathead screw driver
**small Philips screw driver
====other===
*antifreeze
*snip vegetation underneath

2017 NGEE Nome October trip

2017-09-07T21:09:04Z

137.229.92.185:

===Activities:===
* teller top:
** double-check data
** thermal conductivity probes working?
** maybe replace cnr4
* teller bottom
** sr50a transducer replacement, 2x
** remove 1 PT
** discharge measurement
**
* Kougarok m64
** bring guy wire markers for K64 met station (at uaf storage)

===Loose Itinerary===
* 9/29
** evening: arrive & stay in apartments
* 9/30
* Teller Snow pole survey & replacement
** put gps base at new location at bottom
** walk the end point of the lines set up in March 2017 and secure the orange poles so they are erect for winter.
* 10/1
** Teller button up for winter, snow pole remainder
** remove one PT at the bottom site
* 10/2
** drive to kougarok. download data over radios from K sites
** stretch goal... visit k2 if time for thaw depth measurements
* 10/3
** kougarok m64 winter button up
** soil pit
** kougarok m64 finish surveying
* 10/4
* Council
** survey 2017 plots?
** download data
** visit C2?
* 10/5 depart

2017 NGEE Nome October trip

2017-09-07T21:08:11Z

137.229.92.185: /* Activities: */

===Extra notes===
*bring guy wire markers for K64 met station
** (at uaf storage)

===Activities:===
* teller top:
** double-check data
** thermal conductivity probes working?
** maybe replace cnr4
* teller bottom
** sr50a transducer replacement, 2x
** remove 1 PT
** discharge measurement
**
* Kougarok m64

===Loose Itinerary===
* 9/29
** evening: arrive & stay in apartments
* 9/30
* Teller Snow pole survey & replacement
** put gps base at new location at bottom
** walk the end point of the lines set up in March 2017 and secure the orange poles so they are erect for winter.
* 10/1
** Teller button up for winter, snow pole remainder
** remove one PT at the bottom site
* 10/2
** drive to kougarok. download data over radios from K sites
** stretch goal... visit k2 if time for thaw depth measurements
* 10/3
** kougarok m64 winter button up
** soil pit
** kougarok m64 finish surveying
* 10/4
* Council
** survey 2017 plots?
** download data
** visit C2?
* 10/5 depart

Oliktok summer 2017 trip

2017-09-07T19:13:50Z

137.229.92.185:

*replace sr50a transducers
**1)unscrew sensor from mount
**2)unscrew cable from sensor
**3)unscrew all little screws holding the transducer to the sensor body (use the frisbee to work so you don't lose the little screws)
**4)unclip the wires of the old transducer, remove the O ring
**5)place desiccant in the new transducer
**5)place the new O ring on the sensor body and clip the new transducer wire
**6)line up the notch of the new transducer on the sensor body
**7)screw in all the little screws
**8)replace the sensor on the mount and screw in the cable (which is notched)

**snip vegetation underneath
*antifreeze
*put up temperature sensor
**cable housing
*plastic cable covers for all cables entering into the logger?
*level geonor
*CFM100
**1)unplug power from logger
**2)plug and screw in the CFM100
**3)re-plug power to the logger
**4)

Fall 2017 visit

2017-09-06T20:05:28Z

137.229.92.185:

*Pluvio
**replace all older panels on the whyoming gauge
**UPS for Pluvio?
**antifreeze
**install UPS for pluvio?
**whats up with that heater anyways?

*SR50a -replace transducer

*figure out PAR sensor issues
**fix lake sensor grounding
**organize thoughts about all the connectors

*remove bf5 for winter?

*fix garden cam?

* CNR4- replace desiccant

*check level on radiometers, especially Bf5 to decide if need a new mount.

*fuse for enclosure

*replace tarp on battery box

*winterize evap pan

*program changes
**add pluvio wiring to program notes

===to bring===
*zip ties of many sizes
*wires of many colors (especially red and black)
*tarp for battery box

*tools http://ngeedata.iarc.uaf.edu/wiki/Tool_list
*computer + charger
*field laptop + charger
*field book
*copy of wiki
hand warmers

Clothes
*raincoat
*rain pants
*sourdough jacket
*warm hats +ear warmers
*gloves and mittens
*blue muck boots
*fleece pants
*leggings
*orange fleece
*wool long sleeve
*socks, undies
*work pants
*insulated bibs

Other Gear
*sleeping bag
*earplugs

Fall 2017 visit

2017-09-01T00:45:10Z

137.229.92.185:

*Pluvio
**replace all older panels on the whyoming gauge
**UPS for Pluvio?
**antifreeze
**install UPS for pluvio?
**whats up with that heater anyways?

*SR50a -replace transducer

*figure out PAR sensor issues
**fix lake sensor grounding
**organize thoughts about all the connectors

*remove bf5 for winter?

*fix garden cam?

* CNR4- replace desiccant

*check level on radiometers, especially Bf5 to decide if need a new mount.

*fuse for enclosure

*replace tarp on battery box

*winterize evap pan

===to bring===
*zip ties of many sizes
*wires of many colors (especially red and black)
*tarp for battery box

*tools http://ngeedata.iarc.uaf.edu/wiki/Tool_list
*computer + charger
*field laptop + charger
*field book
*copy of wiki
hand warmers

Clothes
*raincoat
*rain pants
*sourdough jacket
*warm hats +ear warmers
*gloves and mittens
*blue muck boots
*fleece pants
*leggings
*orange fleece
*wool long sleeve
*socks, undies
*work pants
*insulated bibs

Other Gear
*sleeping bag
*earplugs

2017 NGEE Nome October trip

2017-08-31T21:02:36Z

137.229.92.185: Created page with "*bring guy wire markers for K64 met station"

*bring guy wire markers for K64 met station

NGEE

2017-08-31T21:02:02Z

137.229.92.185: /* Trips */

===Safety===
* Before every trip be sure to submit a Field Emergency Plan to your director & travel coordinator.
* Also update the field supplemental as needed.
* Annually, review the NGEE team safety document. Find it online:
** http://ngee-arctic.ornl.gov/sites/default/files/ngee_project_field_safety_manual_rev_2016V6.pdf
** http://ngee-arctic.ornl.gov/ngee-safety

===Notes===
* https://ngee-arctic.atlassian.net/wiki/display/MOD/NGEE-Arctic+Modeling+Home
* [[NGEE Barrow Intensive Sites Initial Wiring]]
* Programs:
** https://github.com/frankohanlon/ngee/
* [[NGEE Site A Instrumentation History]]
* [[NGEE Site B Instrumentation History]]
* [[NGEE Site C Instrumentation History]]
* [[NGEE Site D Instrumentation History]]
* [[NGEE Data Log Record]]
* [[NGEE Backup Instrumentation]]
* [[Several Important Network Devices]]
* [[NGEE-Barrow Manual QA Notes]]
* [[NGEE-Nome Sites]]
* [[NGEE-Barrow Telemetry Testing]]
* [[NGEE Data Archive Direct Links]]
* [[NGEE Download ARM Data]]
* [[NGEE Barrow Computer Network Links]]
* [[NGEE Seward Survey Notes]]

===Metadata type stuff===
* [[NGEE Data Archive Direct Links]]
* Snake River observations from the NWS:
** http://aprfc.arh.noaa.gov/rivobs/rivobs.php
* Still to be collated: [[NGEE-Barrow Calibration and Serial Numbers]]
* Thermistor Probe Calibrations ([https://docs.google.com/open?id=0B0bJdr7FBoY-MG9FTjFCb2w2c28])
* Thermistor Strings and Triple Calibrations ([https://docs.google.com/open?id=0B0bJdr7FBoY-WkVfMDdLX3Zjc2c])
* Timezone - UTC
* PakBus IDs - A = 400; B = 401; C = 402; D = 404; BRW_Grid = 403

====Lists====
* [[Guruplug Setup]]
* [[Webcam Tips]]
* [[To-Do in October 2016]]
===Trips===
* [[NGEE April 11 2012 Trip]]
* [[NGEE September 3 2012 Trip]]
* [[NGEE September 24 2012 Trip]]
* [[NGEE Barrow Wiring Layout]]
* [[NGEE Barrow Intensive Sites Initial Wiring]]
* [[NGEE Barrow 2013 Boring Trip]]
* [[NGEE Barrow 2013 Site Install Trip|[NGEE Barrow 2013 Site Install Trip 5/7]]
* [[NGEE Barrow 2013 Site Install Trip 2|NGEE Barrow 2013 Site Install Trip June]]
* [[NGEE Barrow 2013 Site D Install Trip August 2013]]
* [[March 2014 Barrow]]
* [[August 2014 Barrow]]
* [[NGEE December 2014 Barrow]]
* [[NGEE May 2015 Barrow]]
* [[NGEE June 2015 Barrow]]
* [[NGEE July 2015 Nome]]
* [[NGEE August 2015 Barrow]]
* [[NGEE September 2015 Barrow]]
* [[NGEE September 2015 Nome]]
* [[NGEE Barrow Remainder Items]]
* [[NGEE Spring 2016]]
* [[NGEE Barrow April 2016]]
* [[NGEE Nome April 2016 pt 1]]
* [[NGEE Nome April 2016 pt2]]
* [[NGEE Barrow August 2016]]
* [[NGEE Barrow September 2016]]
* [[2016 NGEE August Nome Trip]]
* [[2016 NGEE September Nome Trip]]
* [[2017 NGEE March Nome Trip]]
* [[2017 NGEE April Nome Trip]]
* [[2017 NGEE June Nome Trip]]
* [[2017 NGEE Barrow Trip]]
* [[CPCRW 2012-10-12]]
* [[CPCRW 2013-07-15]]
* [[2017 NGEE GIPL July Nome Trip]]
* [[2017 NGEE Nome August trip]]
* [[2017 NGEE Nome October trip]]

* [[NGEE Iridium System Brainstorm]]

Fall 2017 visit

2017-08-31T20:46:29Z

137.229.92.185:

*Pluvio
**replace all older panels on the whyoming gauge
**UPS for Pluvio?
**antifreeze
**install UPS for pluvio?
**whats up with that heater anyways?

*SR50a -replace transducer

*figure out PAR sensor issues

*remove bf5 for winter?

*fix garden cam?

* CNR4- replace desiccant

*check level on radiometers, especially Bf5 to decide if need a new mount.

*fix lake sensor grounding

*fuse for enclosure

*replace tarp on battery box

*winterize evap pan

===to bring===
*zip ties of many sizes
*wires of many colors (especially red and black)
*tarp for battery box

*tools http://ngeedata.iarc.uaf.edu/wiki/Tool_list
*computer + charger
*field laptop + charger
*field book
*copy of wiki
hand warmers

Clothes
*raincoat
*rain pants
*sourdough jacket
*warm hats +ear warmers
*gloves and mittens
*blue muck boots
*fleece pants
*leggings
*orange fleece
*wool long sleeve
*socks, undies
*work pants
*insulated bibs

Other Gear
*sleeping bag
*earplugs

Fall 2017 visit

2017-08-31T20:41:05Z

137.229.92.185:

*Pluvio
**replace all older panels on the whyoming gauge
**UPS for Pluvio?
**antifreeze
**install UPS for pluvio?
**whats up with that heater anyways?

*figure out PAR sensor issues

*remove bf5 for winter?

*fix garden cam?

* CNR4- replace desiccant

*check level on radiometers, especially Bf5 to decide if need a new mount.

*fix lake sensor grounding

*fuse for enclosure

*replace tarp on battery box

*winterize evap pan

BRING
*zip ties of many sizes
*wires of many colors (especially red and black)
*tarp for battery box

Fall 2017 visit

2017-08-31T20:13:10Z

137.229.92.185:

*Pluvio
**replace all older panels on the whyoming gauge
**UPS for Pluvio?
**antifreeze

*figure out PAR sensor issues

*remove bf5 for winter?

*fix garden cam?

* CNR4- replace desiccant

*check level on radiometers, especially Bf5 to decide if need a new mount.

*install UPS for pluvio?
**whats up with that heater anyways?

*winterize evap pan

BRING
*zip ties of many sizes
*wires of many colors (especially red and black)

Fall 2017 visit

2017-08-29T00:48:33Z

137.229.92.185:

*Pluvio
**replace all older panels on the whyoming gauge
**UPS for Pluvio?
**antifreeze

*figure out PAR sensor issues

*remove bf5 for winter?

Fall 2017 visit

2017-08-28T23:57:20Z

137.229.92.185:

*Pluvio
**replace all older panels on the whyoming gauge
**UPS for Pluvio?
**antifreeze

*figure out PAR sensor issues

Barrow Summer 2017 trip

2017-08-05T00:51:42Z

137.229.92.185:

===ARM===

*replace SR50a snow transducers
*snip veg if necessary
*install CFM
*what is the deal with the LPM power connector? do I need a new one?
*install cs107 => PROGRAM CHANGE
** cable housing

*mount LPM
**baird mount
**pipe
**trail mat
**cable for power and coms
**cable housing
**rebars for base
** two pieces of unistrut
** ubolts

to purchase:
*4 or 8 1/2 in rebar
*pipe: I think i want a 3in pipe (based on http://www.mcnichols.com/?pageCode=pipedims)
*couple extra ubolts just in case for 3in pipe
*grinder

to bring
*sledge hammer (and maybe drill?)
*fish tape
*proof of driving insurrance (reservation number 7127)
*computer and charger!
*tool bag
*anti corrosion goo

for fence install
*pipe pounder
*ladder
*screed stakes
*small bolts and nuts
*drill, metal bits, permafrost bits
*clamp to drill through pipe

===NGEE===

*desiccant for cnr4
*level cnr4
*level tipping buckets
*sr50a transducers

2017 NGEE Nome August trip

2017-08-04T22:09:22Z

137.229.92.185:

*cloth measuring tape
*metric handheld measuring tape
* Phone/tablet for geopdfs (Bob will bring tablet, Lily Phone)
*field book
*pressure transducers for jacob (waiting to hear if he needs reader too)
*handheld radios
*inreach
*ladder from Bob, and bring back other one

todo
*safety doc

Barrow Summer 2017 trip

2017-08-04T02:40:46Z

137.229.92.185:

===ARM===

*replace SR50a snow transducers
*what is the deal with the LPM power connector? do I need a new one?
*install cs107 => PROGRAM CHANGE
** cable housing

*mount LPM
**baird mount
**pipe
**trail mat
**cable for power and coms
**cable housing
**rebars for base
** two pieces of unistrut
** ubolts

to purchase:
*4 or 8 1/2 in rebar
*pipe: I think i want a 3in pipe (based on http://www.mcnichols.com/?pageCode=pipedims)
*couple extra ubolts just in case for 3in pipe
*grinder?

to bring
*sledge hammer (and maybe drill?)
*fish tape
*proof of driving insurrance (reservation number 7127)
*computer and charger!
*tool bag
*anti corrosion goo

for fence install
*pipe pounder
*ladder
*screed stakes
*small bolts and nuts
*drill, metal bits, permafrost bits
*clamp to drill through pipe

===NGEE===

*desiccant for cnr4
*level cnr4
*level tipping buckets
*sr50a transducers

Barrow Summer 2017 trip

2017-08-03T23:19:41Z

137.229.92.185: /* ARM */

===ARM===

*replace SR50a snow transducers
*what is the deal with the LPM power connector? do I need a new one?
*install cs107 => PROGRAM CHANGE
** cable housing

*mount LPM
**baird mount
**pipe
**trail mat
**'''cable for power and coms'''
**cable housing
**rebars(reasses this based on holes in baird mount)
** two pieces of unistrut
** two 3in and two 3.5in pipe clamps

to purchase:
*4 or 8 1/2 in rebar
*pipe: I think i want a 3in pipe (based on http://www.mcnichols.com/?pageCode=pipedims)
*couple extra ubolts just in case for 3in pipe
*grinder?

to bring
*sledge hammer (and maybe drill?)
*fish tape
*proof of driving insurrance (reservation number 7127)
*computer and charger!

for fence install
*pipe pounder
*ladder

===NGEE===

*desiccant for cnr4
*level cnr4
*level tipping buckets
*sr50a transducers

2017 NGEE Nome August trip

2017-08-03T23:15:35Z

137.229.92.185: Created page with "*cloth measuring tape *metric handheld measuring tape * Phone/tablet for geopdfs (Bob will bring tablet, Lily Phone) *field book *pressure transducers for jacob (waiting to he..."

NGEE

2017-08-03T22:22:57Z

137.229.92.185: /* Trips */

2017 NGEE June Nome Trip

2017-08-03T22:22:08Z

137.229.92.185: /* borrowed! must return!= */

===hopeful itinerary===
6/19 arrive
*get mast from grizzly
*get required items from storage
*get camping stuff

6/20-6/22
*build station at K M64 (go to K sites first depending on bob bolton's availability)

6/23
*resupply in Nome

6/24-26
*visit K sites
**Level precip bucket
**download data
**install HMP's
**update program
**SR50a transducers

6/27
*Visit C1
*Contact the Dredge @ 907.304.1270 and ask for housekeeping service at Unit 1 when you arrive.
**see ngee unit 1 on phone for lockbox combo
**606 E 4th st

6/28
*Visit teller

6/29
*reinstall radio base in town
*visit Anvil school and anvil mnt sites
*ship everything
*fly out

if we're awesome
*kigluaiks trip

=== @ [[Kougraok M64]]===
** soil pit (fall deployment)
*** soil moisture @ 5, 10, 20, 30, 40 cm bgs
** soil thermal conductivity @ 10, 20, 30, 40 cm bgs
** soil temperature @ 10, 20, 30, 40 cm bgs
**** soil heat flux near base of active layer & plant / soil boundary
*** 1.5m soil temperature profile
*** snow depth @ tripod
*** snow depth away from tripod
*** interval camera
*** 4 component radiation
*** Spectral response sensors: NDVI & PRI up looking and two vegetation communities
*** 1.5m Air temperature, Relative Humidity, & Dew Point Temperature
*** Wind speed and direction at 3m
*** summer precipitation
* @ Teller Bottom
** send one more program to fix 5cm bgs soil moisture out of range array error

===Old Atlas sites:===
* @ K2 met
** tower swap
** wind, temp rh look good
* @ C1 Grid
** HMP155 has been changed out here
** fix MRC portion of program last change we screwed something up and sent the 2011 program with a but rather than the 2012 version.
* @ C2 Blueberry
** Replace the LW Transmitted cable, will need to bring the whole package from Fairbanks
** 10meter AT/RH has not worked since 2011
* @anvil school
**propeller for wind sensor

===teller===
*measure stream flow
*fix program at tell bottom

===bring===
**<s>radios to download K sites remotely if necessary</s>
**copies of permits?
**<s> radios for base station (in basement)
**drill bit for VATP probe
**zip ties
**hose clamps
**TOOL BAGS
**CABLE BAG
**putty
**resistor for VATP
**fish tape
**measuring tape
**anti corrosion goo --(In checked bag)--
**extra nuts, washers, etc
**extra ubolts
**guy wire and findings
**inReach, sat phone</s>
**<s>sledge hammer
**sleeping bag liner?
**torpedo and circle level
**CFM100+card
**field books, pencils, pens sharpies
**duct tape
**splicing tape
**electrical tape</s>
**BUG SHIRT
**<s>toughbook and charger (maybe also spare battery?
**spare sr50a transducers
**car chargers for computers
**extendable ladder</s>
**sandles for river crossing
**extra battery for phone
**<s>wires and fittings for battery box, and crimps for connections</s>

===todo===
**<s>book housing: campsite? NPS bunkhouse: 1800.471.2352 or go downtown their office is the Sitnasauk building on front street?
**ship things
**find all the stuff for tower</s>
**look@ data bob recently downloaded from teller
**look at data streaming in on NGEE data
**which sites need new batteries?
**replace wire on solar panel?
**<s>wire up box
**figure out cross arms</s>
**<s>Do i need two mux's?
**<s>make list for bob to look for in UAF storage (trail matt?, hose clamps for tipping bucket, tripod, buy mast if have time, batteries)
**TA's
**find other sr50a
**make sure sr50a SDI address are set
**get transducer for sr50a</s>
**safety plan
**<s>call about mast again - ordered
**what to do about lack of trailmatt? -rocky enough doesn't matter
**location? -will pick when there
**which is the broken old style wind sensor -anvil mountain
**camera? - not on this trip </s>
**<s>tubing for barometer
**put maps on my phone
**write new program
**VATP offsets
**CNR4 resistor?
**2nd resistor for VATP
**cancel hotel
**put program on field laptop</s>

===bob todo list===
*<s>geo PDFs
*base radio situation in town
*pipe cutter
*rope come-along</s>

===to buy===
*<s>Alaska Steel
**threaded coupler for 1 to 1.25 pipe for Wind sensor
**cross arms (8ft rad[nurailT], 5 ft tower snow[nurailT], 4,4,5,3 ft far snow[3nurailT], 4,4,3ft tipping[2nurailT], 5 ft far rad
***7nurail 1.25 T fittings, 8ft, 3*5ft, 4*4ft, 2*3ft
**nurail fittings </s>
*campbell
**<s>2 new propellers (1 for anvil school, 1 for teller top)</s>
**20 SR50a transducers
**CNR4 desiccant. how many (Teller top, teller bottom, 4 in barrow)?
**CFM
**long SR50a cable
*home depot
**<s>conduit
**fuse (5V) and holder
**ring connectors for batteries
**tennis balls or something to cover pokey objects
*** Rebar protection, found at AIH, sometimes home depot but didn't see anything in May when I was looking</s>
**rebar/screed stakes
**<s>guy wire and findings

*metric handheld flow rod</s>
*european terminal strips (white kind)

===for camping===
* WATER
** water jug in nome storage
*Tents, sleeping bags, sleeping pads
** Tent is in room 112
** sleeping pads are in uaf storage
** sleeping bag are in uaf storage
* Stove
** propane stove in nome storage
*Food

===shipped===
on 6/9/17
*tower+hinge
*extendable ladder
*6 batteries
*8 nurail 1/25'' fittings
*CNR4
*Enclosure
**CR1000+mux+solar charge controller wired up
**Barometer, wired + tube
**4 big power cables
**2 short SR50a cables
**2 SR50a mounts
**Skin temp (cable attached)
**Decagon sensors (cables attached)
**5 Hydraprobes
**3 SW12V
**Tarp
**Enclosure mounting kit: ubolts, putty, dessicant
**two battery connector cables with findings already crimped
**both CNR4 cables
*screed stake
*action packer
**bob's tool bags
**chair
**radios for downloading data from K sites

on 6/12/17

battery box
*spare short pieces of rebar (both widths)
*two SW12V
*4 dog anchors
*2 rolls of 100 ft conduit
*6 tasty bites + 1 rice (buy more rice)
*rad sensor mounts
*2 new replacement RMYoung props + nuts
*tarp
*pipe wrench
*spare wires
*electrical findings baggie
*spare hoseclamps, ubolts, rebar pipe mounts
*saw
*rebar caps
*wind sensor 1'' pipe and reducer for top of tower (screwed in)
*anti corrosion goo

action packer
*rope + come-along
*hmp mount + shield
*tent

Loose
*cross arms
*umbrella
*long drill bit
*grounding poles

===borrowed! must return!===
*6 sr50a transducers from ARM
*5 sr50a transducers from GIPL
*all returned 8/3/17

Barrow Summer 2017 trip

2017-08-03T22:03:05Z

137.229.92.185: /* ARM */

===ARM===

*replace SR50a snow transducers
*what is the deal with the LPM power connector? do I need a new one?
*install cs107 => PROGRAM CHANGE
** cable housing

*mount LPM
**baird mount
**pipe
**trail mat
**cable for power and coms
**cable housing
**rebars(reasses this based on holes in baird mount)
** two pieces of unistrut
** two 3in and two 3.5in pipe clamps

to purchase:
*4 or 8 1/2 in rebar
*pipe: I think i want a 3in pipe (based on http://www.mcnichols.com/?pageCode=pipedims)
*couple extra ubolts just in case for 3in pipe

to bring
*sledge hammer (and maybe drill?)
*fish tape
*proof of driving insurrance (reservation number 7127)
*computer and charger!

for fence install
*pipe pounder
*ladder

===NGEE===

*desiccant for cnr4
*level cnr4
*level tipping buckets
*sr50a transducers

Barrow Summer 2017 trip

2017-07-15T00:21:01Z

137.229.92.185: /* ARM */

===ARM===

*replace SR50a snow transducers
*what is the deal with the LPM power connector? do I need a new one?
*install cs107 => PROGRAM CHANGE
** cable housing

*mount LPM
**baird mount
**pipe
**trail mat
**cable for power and coms
**cable housing
**rebars(reasses this based on holes in baird mount)
** two pieces of unistrut
** two 3in and two 3.5in pipe clamps

to purchase:
*4 or 8 1/2 in rebar
*pipe: I think i want a 3in pipe (based on http://www.mcnichols.com/?pageCode=pipedims)
*couple extra ubolts just in case for 3in pipe

to bring
*sledge hammer (and maybe drill?)
*fish tape
*proof of driving insurrance (reservation number 7127)

for fence install
*pipe pounder
*ladder

===NGEE===

*desiccant for cnr4
*level cnr4
*level tipping buckets
*sr50a transducers

2017 NGEE GIPL July Nome Trip

2017-07-14T23:23:11Z

137.229.92.185: /* for 1 snow stand */

===to ship===
*pounder hole thingy
*shovel (just in case)
*supplies for snow stands
*calibrated boxes
*snow sensors
*nylon rods for deeper thermistors
*2 x extra 50Ah battery
**ship Monday? (needs to be there by the 17th)

shipped Monday July 10th:
*2 extra 50ah batteries
*conduit
*shovel
*white pokey sticks
*schnozles
*15 calibrated boxes without snow depth attachment
*1 calibrated box with snow depth attachment
*shipped to Bill Cable in Nome (345-23944502)

shipped Wednesday July 12:
*4 judd snow depth sensors
**also in this box: hose clamps, pre cut guy wire, 90degree elbows, 8 wire clamps,
*poles for stands
*rebar
*3 calibrated boxes with snow depth
*1 calibrated box for the far away logger, plus the extra box with the sensors
*shipped to Bill Cable in Nome(345-23944572)

===for 1 snow stand===
*pipes, threaded
**5ft, 2X4ft, 2ft
*elbows
**2 way and a 3 way
*Guy wire, two pieces
*guy wire clamps, 4 pieces
*3 rebar
*6 hose clamps
*conduit
*zip ties

Wiring channel for snow sensors
*1: clear and black
*2: white
*3:
*4: green and red
*brown wire: not used

===get from storage===
*battery for K1 if the Helo has space
*sledge hammer for rebar pounding
*shovel
*bear spray

===to bring in checked baggage===
*drill and drill bits
*frame backpack
*more 1/2" liquitight (25' roll)
*food for Selawik
*little hobo screw drivers! campbell ones are too big for the hobo snow sensor instal
*anti seize goo

===buy in Nome===
*spray foam

Barrow Summer 2017 trip

2017-07-14T19:47:43Z

137.229.92.185: /* ARM */

===ARM===

*replace SR50a snow transducers
*what is the deal with the LPM power connector? do I need a new one?
*install cs107 => PROGRAM CHANGE
** cable housing

*mount LPM
**baird mount
**pipe
**trail mat
**cable for power and coms
**cable housing
**rebars(reasses this based on holes in baird mount)
** two pieces of unistrut
** two 3in and two 3.5in pipe clamps

to purchase:
*4 rebars
*pipe: I think i want a 3in pipe (based on http://www.mcnichols.com/?pageCode=pipedims)
*couple extra ubolts just in case for 3in pipe

to bring
*sledge hammer (and maybe drill?)
*fish tape
*proof of driving insurrance (reservation number 7127)

for fence install
*pipe pounder
*ladder

===NGEE===

*desiccant for cnr4
*level cnr4
*level tipping buckets
*sr50a transducers

Barrow Summer 2017 trip

2017-07-13T23:08:52Z

137.229.92.185: /* ARM */

===ARM===

*replace SR50a snow transducers
*what is the deal with the LPM power connector? do I need a new one?
*install cs107 => PROGRAM CHANGE
** cable housing

*mount LPM
**baird mount
**pipe
**trail mat
**cable for power and coms
**cable housing
**rebars(reasses this based on holes in baird mount)
** two pieces of unistrut
** two 3in and two 3.5in pipe clamps

to purchase:
*4 rebars
*pipe: I think i want a 3in pipe (based on http://www.mcnichols.com/?pageCode=pipedims)
*couple extra ubolts just in case for 3in pipe

to bring
*sledge hammer (and maybe drill?)
*fish tape

for fence install
*pipe pounder
*ladder

===NGEE===

*desiccant for cnr4
*level cnr4
*level tipping buckets
*sr50a transducers

2017 NGEE GIPL July Nome Trip

2017-07-12T23:06:55Z

137.229.92.185:

===to ship===
*pounder hole thingy
*shovel (just in case)
*supplies for snow stands
*calibrated boxes
*snow sensors
*nylon rods for deeper thermistors
*2 x extra 50Ah battery
**ship Monday? (needs to be there by the 17th)

shipped Monday July 10th:
*2 extra 50ah batteries
*conduit
*shovel
*white pokey sticks
*schnozles
*15 calibrated boxes without snow depth attachment
*1 calibrated box with snow depth attachment
*shipped to Bill Cable in Nome (345-23944502)

shipped Wednesday July 12:
*4 judd snow depth sensors
**also in this box: hose clamps, pre cut guy wire, 90degree elbows, 8 wire clamps,
*poles for stands
*rebar
*3 calibrated boxes with snow depth
*1 calibrated box for the far away logger, plus the extra box with the sensors
*shipped to Bill Cable in Nome(345-23944572)

===for 1 snow stand===
*pipes, threaded
**5ft, 2X4ft, 2ft
*elbows
**2 way and a 3 way
*Guy wire, two pieces
*guy wire clamps, 4 pieces
*3 rebar
*6 hose clamps
*conduit
*zip ties

Wiring channel for snow sensors
*1: clear and black
*2: white
*3:
*4: green and red
*brown wire: not used

Configuring Hobo for logger
[[File:JuddWiring]]

===get from storage===
*battery for K1 if the Helo has space
*sledge hammer for rebar pounding
*shovel
*bear spray

===to bring in checked baggage===
*drill and drill bits
*frame backpack
*more 1/2" liquitight (25' roll)
*food for Selawik
*little hobo screw drivers! campbell ones are too big for the hobo snow sensor instal
*anti seize goo

===buy in Nome===
*spray foam

2017 NGEE GIPL July Nome Trip

2017-07-12T22:55:55Z

137.229.92.185: /* to bring in checked baggage */

===to ship===
*pounder hole thingy
*shovel (just in case)
*supplies for snow stands
*calibrated boxes
*snow sensors
*nylon rods for deeper thermistors
*2 x extra 50Ah battery
**ship Monday? (needs to be there by the 17th)

shipped Monday July 10th:
*2 extra 50ah batteries
*conduit
*shovel
*white pokey sticks
*schnozles
*15 calibrated boxes without snow depth attachment
*1 calibrated box with snow depth attachment
*shipped to Bill Cable in Nome (345-23944502)

shipped Wednesday July 12:
*4 judd snow depth sensors
**also in this box: hose clamps, pre cut guy wire, 90degree elbows, 8 wire clamps,
*poles for stands
*rebar
*3 calibrated boxes with snow depth
*1 calibrated box for the far away logger, plus the extra box with the sensors
*shipped to Bill Cable in Nome(345-23944572)

===for 1 snow stand===
*pipes, threaded
**5ft, 2X4ft, 2ft
*elbows
**2 way and a 3 way
*Guy wire, two pieces
*guy wire clamps, 4 pieces
*3 rebar
*6 hose clamps
*conduit
*zip ties

Wiring channel for snow sensors
*1: clear and black
*2: white
*3:
*4: green and red
*brown wire: not used

Configuring Hobo for logger

===get from storage===
*battery for K1 if the Helo has space
*sledge hammer for rebar pounding
*shovel
*bear spray

===to bring in checked baggage===
*drill and drill bits
*frame backpack
*more 1/2" liquitight (25' roll)
*food for Selawik
*little hobo screw drivers! campbell ones are too big for the hobo snow sensor instal
*anti seize goo

===buy in Nome===
*spray foam

2017 NGEE GIPL July Nome Trip

2017-07-12T19:18:06Z

137.229.92.185: /* to ship */

===to ship===
*pounder hole thingy
*shovel (just in case)
*supplies for snow stands
*calibrated boxes
*snow sensors
*nylon rods for deeper thermistors
*2 x extra 50Ah battery
**ship Monday? (needs to be there by the 17th)

shipped Monday July 10th:
*2 extra 50ah batteries
*conduit
*shovel
*white pokey sticks
*schnozles
*15 calibrated boxes without snow depth attachment
*1 calibrated box with snow depth attachment
*shipped to Bill Cable in Nome (345-23944502)

shipped Wednesday July 12:
*4 judd snow depth sensors
**also in this box: hose clamps, pre cut guy wire, 90degree elbows, 8 wire clamps,
*poles for stands
*rebar
*3 calibrated boxes with snow depth
*1 calibrated box for the far away logger, plus the extra box with the sensors
*shipped to Bill Cable in Nome(345-23944572)

===for 1 snow stand===
*pipes, threaded
**5ft, 2X4ft, 2ft
*elbows
**2 way and a 3 way
*Guy wire, two pieces
*guy wire clamps, 4 pieces
*3 rebar
*6 hose clamps
*conduit
*zip ties

Wiring channel for snow sensors
*1: clear and black
*2: white
*3:
*4: green and red
*brown wire: not used

Configuring Hobo for logger

===get from storage===
*battery for K1 if the Helo has space
*sledge hammer for rebar pounding
*shovel
*bear spray

===to bring in checked baggage===
*drill and drill bits
*frame backpack
*more 1/2" liquitight (25' roll)
*food for Selawik
*little hobo screw drivers! campbell ones are too big for the hobo snow sensor instal

===buy in Nome===
*spray foam

2017 NGEE GIPL July Nome Trip

2017-07-12T19:17:14Z

137.229.92.185: /* to ship */

===to ship===
*pounder hole thingy
*shovel (just in case)
*supplies for snow stands
*calibrated boxes
*snow sensors
*nylon rods for deeper thermistors
*2 x extra 50Ah battery
**ship Monday? (needs to be there by the 17th)

shipped Monday July 10th:
*2 extra 50ah batteries
*conduit
*shovel
*white pokey sticks
*schnozles
*15 calibrated boxes without snow depth attachment
*1 calibrated box with snow depth attachment
*shipped to Bill Cable in Nome (345-23944502)

shipped Wednesday July 12:
*4 judd snow depth sensors
**also in this box: hose clamps, pre cut guy wire, 90degree elbows, 8 wire clamps,
*poles for stands
*rebar
*3 calibrated boxes with snow depth
*1 calibrated box for the far away logger, plus the extra box with the sensors

===for 1 snow stand===
*pipes, threaded
**5ft, 2X4ft, 2ft
*elbows
**2 way and a 3 way
*Guy wire, two pieces
*guy wire clamps, 4 pieces
*3 rebar
*6 hose clamps
*conduit
*zip ties

Wiring channel for snow sensors
*1: clear and black
*2: white
*3:
*4: green and red
*brown wire: not used

Configuring Hobo for logger

===get from storage===
*battery for K1 if the Helo has space
*sledge hammer for rebar pounding
*shovel
*bear spray

===to bring in checked baggage===
*drill and drill bits
*frame backpack
*more 1/2" liquitight (25' roll)
*food for Selawik
*little hobo screw drivers! campbell ones are too big for the hobo snow sensor instal

===buy in Nome===
*spray foam

2017 NGEE GIPL July Nome Trip

2017-07-11T23:23:12Z

137.229.92.185: /* to bring in checked baggage */

===to ship===
*pounder hole thingy
*shovel (just in case)
*supplies for snow stands
*calibrated boxes
*snow sensors
*nylon rods for deeper thermistors
*2 x extra 50Ah battery
**ship Monday? (needs to be there by the 17th)

shipped Monday June 10th:
*2 extra 50ah batteries
*conduit
*shovel
*white pokey sticks
*schnozles
*15 calibrated boxes without snow depth attachment
*1 calibrated box with snow depth attachment
*shipped to Bill Cable in Nome (345-23944502)

===for 1 snow stand===
*pipes, threaded
**5ft, 2X4ft, 2ft
*elbows
**2 way and a 3 way
*Guy wire, two pieces
*guy wire clamps, 4 pieces
*3 rebar
*6 hose clamps
*conduit
*zip ties

Wiring channel for snow sensors
*1: clear and black
*2: white
*3:
*4: green and red
*brown wire: not used

Configuring Hobo for logger

===get from storage===
*battery for K1 if the Helo has space
*sledge hammer for rebar pounding
*shovel
*bear spray

===to bring in checked baggage===
*drill and drill bits
*frame backpack
*more 1/2" liquitight (25' roll)
*food for Selawik
*little hobo screw drivers! campbell ones are too big for the hobo snow sensor instal

===buy in Nome===
*spray foam

2017 NGEE GIPL July Nome Trip

2017-07-11T23:22:22Z

137.229.92.185: /* for 1 snow stand */

===to ship===
*pounder hole thingy
*shovel (just in case)
*supplies for snow stands
*calibrated boxes
*snow sensors
*nylon rods for deeper thermistors
*2 x extra 50Ah battery
**ship Monday? (needs to be there by the 17th)

shipped Monday June 10th:
*2 extra 50ah batteries
*conduit
*shovel
*white pokey sticks
*schnozles
*15 calibrated boxes without snow depth attachment
*1 calibrated box with snow depth attachment
*shipped to Bill Cable in Nome (345-23944502)

===for 1 snow stand===
*pipes, threaded
**5ft, 2X4ft, 2ft
*elbows
**2 way and a 3 way
*Guy wire, two pieces
*guy wire clamps, 4 pieces
*3 rebar
*6 hose clamps
*conduit
*zip ties

Wiring channel for snow sensors
*1: clear and black
*2: white
*3:
*4: green and red
*brown wire: not used

Configuring Hobo for logger

===get from storage===
*battery for K1 if the Helo has space
*sledge hammer for rebar pounding
*shovel
*bear spray

===to bring in checked baggage===
*drill and drill bits
*frame backpack
*more 1/2" liquitight (25' roll)
*food for Selawik

===buy in Nome===
*spray foam

2017 NGEE GIPL July Nome Trip

2017-07-11T22:27:48Z

137.229.92.185:

2017 NGEE GIPL July Nome Trip

2017-07-08T00:51:16Z

137.229.92.185: /* for 1 snow stand */

===to ship===
*pounder hole thingy
*supplies for snow stands
*calibrated boxes

===for 1 snow stand===
*pipes, threaded
**5ft, 2X4ft, 2ft
*elbows
**2 way and a 3 way
*Guy wire, two pieces
*guy wire clamps, 4 pieces
*3 rebar
*6 hose clamps
*conduit
*zip ties

===get from storage===
*battery for K1 if the Helo has space
*sledge hammer for rebar pounding

2017 NGEE GIPL July Nome Trip

2017-07-08T00:51:03Z

137.229.92.185: /* for 1 snow stand */

===to ship===
*pounder hole thingy
*supplies for snow stands
*calibrated boxes

===for 1 snow stand===
*pipes, threaded
**5ft, 2X4ft, 2ft
*elbows
**2 way and a 3 way
*Guy wire, two pieces
*guy wire clamps, 4 pieces
*3 rebar
*6 hose clamps
*conduit

===get from storage===
*battery for K1 if the Helo has space
*sledge hammer for rebar pounding

2017 NGEE GIPL July Nome Trip

2017-07-08T00:44:24Z

137.229.92.185: Created page with "===to ship=== *pounder hole thingy *supplies for snow stands *calibrated boxes ===for 1 snow stand=== *pipes, threaded **5ft, 2X4ft, 2ft *elbows **2 way and a 3 way *Guy wire..."

===to ship===
*pounder hole thingy
*supplies for snow stands
*calibrated boxes

===for 1 snow stand===
*pipes, threaded
**5ft, 2X4ft, 2ft
*elbows
**2 way and a 3 way
*Guy wire, two pieces
*guy wire clamps, 4 pieces
*3 rebar
*6 hose clamps

===get from storage===
*battery for K1 if the Helo has space
*sledge hammer for rebar pounding