2015 July Nome Trip

2015-07-26T17:52:52Z

209.193.27.85:

===PreTrip To Do===

* dessicant
* load maps onto phone / touch pad
* review programs again.
* CR1000 for K3 site... add full program if time allows
* CNR4 Bracket - locate
* Precip bucket calibration unit -locate

===To bring back===

===To Bring===
* Electricians putty
* Temperature sensors for repeater sites
* lithium backup battery w/ charger
* Delorme Deal
* Satphone
* fieldbook
* SR50As
* maps for kigluaiks
* toolbags
* volt meter
* 3 pieces 107 probe & radiation shield for the repeaters
* gopro w/ chest mount
* Chargers
** USB for Gopro / delorme
** phone
** lithium battery
** bluetooth speaker
* CR2032 batteries for Kenji's Hobos
* Diode for Anvil Mountain

===To Buy===
* screw in anchors for radiation towers and 10 meter tripods

===To grab from storage===
* Pepper Spray
* hand maul for tower
* pipe the right size is in there

=== Anvil Mountain===
* Add 107 Temperature for air temperature
** modify program
* Look at WS again
** bring out a diode.
* See about fixing HMP45c
*

===Monday 7/27:===
* Fly to Nome
* pick up vehicle
* visit storage
** pick up water jugs
** cooler
*** get water @ hotel
** get pepper spray (from store or storage depending)
* get a cross arm & extra rod / pipe from nome storage for shrub site radiation
* grocery store
** yogurt & garbage snacks
** coke etc
** ice for cooler
* get set up in Kougarok & download data from the sites over radio network.

===Tuesday 7/28:===
* if there is time in the morning, run over to K2 Met and do required things there.
* Take crew from Nome to K3 Mauze
* Add a CR1000 and radiation sensors
* bring cable protection
* and PEP radiometers to site. (brown tape calibration information)

===Wednesday 7/29:===
* If K2 is done then try to visit the Kigluaiks Site
* If Kig site is inaccessible then visit Council: C1, Kenji's site, Skookum
* Or, chill with rest of NGEE team
* Return to Nome

===Thursday 7/30:===
* Chill with rest of NGEE team
* Spend night in Nome

===Friday 7/31:==
* Return to Fairbanks

Stuff to do:
C1 Grid
* Re-level precip bucket

Kenji Bear Creek:
* replace hobo and soil surface / well temperature sensors

Skookum Pass
* Replace CR10X w/ pakbus CR10X
** program and update firmware in Fairbanks first... test...
* add radiation shield for air temperature sensor

Anvil City
* look in box to see what Chas left.

Kigulaiks
* Replace CR10X w/ pakbus CR10X
** program and update firmware in Fairbanks first... test...
* add radiation shield for air temperature sensor
* add PRT sensor for air temperature
** bring out precision resistor for PRT

Anvil Mountain
* Replace CR10X w/ pakbus CR10X
** program and update firmware in Fairbanks first... test...
* add radiation shield for air temperature sensor
* add PRT sensor for air temperature
** bring out precision resistor for PRT

K1 Burn
* Download data over radio network

K2 Met
* bring out supplies to firm up guy wire anchors for tower and radiation tower
* examine tower to see if it is safe for climbing
* download data
* replace desiccant in radiometers
* remove CR800

K3 Mauze Gulch
* bring out cross arm and additional support for CNR4
* remove CNR4 bracket from PEP?
* SI-111 bracket for cross arm
* download data
* bring out CR1000 for radiation
* wire to power CR1000 from existing CR10X

To Do in Fairbanks:
* Look over Lily's data list again :https://docs.google.com/document/d/1O7GPQrjCoNKs9fV2-_FnjAkilxY_XUGOqsHWV2C-DeI/edit
* Bring out a base radio to download data from all the sites.
** need to track down 12 volt cig adapter

Packing List:

Trip Extras
* hose clamps / tape / for securing 107 temperatures into old radiation shields

Computer Package 1 (Campbell Scientific):
* 2 serial cables
* SC32B
* Rugged Freewave Radio (unconfigured currently)
* Waterproof Freewave Radio (unconfigured currently)
* waterproof freewave cable
* stub antenna

Computer Package 2 (Hobo)
* small phillips screwdriver (to open hobo)
* small flat head screwdriver (to slip out old hobo battery)
* 2 temperature cables for Bear River Site (Kenji Council Site)
* hobo for bear river site
* USB cable to communicate with Hobo
* extra CR2032 batteries for Anvil City Hobos

Anvil Mountain Repeater Package:
* Anvil CR10X
* 107 Probe
* small diodes to Wind Speed sensor

Kigluaiks Repeater Package:
* Kigluaiks CR10X
* 107 Probe

Skookum Repeater Package:
* CR10X Logger

K2 Met Package:
* Desiccant for radiometers
* screw in stakes for guy wire anchors
* guy wire pieces?
*

K3 Mauze Package that is already in Nome:
* SI-111 & Cable & Mount (on PEP)
* CNR4 & Cable & Mount (on PEP)
*

K3 Mauze Package for new radiation stuff:
* CR1000 w/ program
* power cord for CR1000 (run from CR10x)
* cable protection for new sensor cable

Electronics

IARC 207 Wiki - User contributions [en]

2015 July Nome Trip