http://ocotal.iarc.uaf.edu/api.php?action=feedcontributions&feedformat=atom&user=216.67.7.140&*IARC 207 Wiki - User contributions [en]2026-05-12T22:06:53ZUser contributionsMediaWiki 1.34.2http://ocotal.iarc.uaf.edu/index.php?title=TFS_Site_Wiring&diff=2013TFS Site Wiring2013-05-14T06:34:04Z<p>216.67.7.140: </p>
<hr />
<div>'''5/4/2013 Note:<br> Thinking about moving AT/RH and other sensors needing 12V power from AM1632B back to CR3000 for simpler wiring in the field'''<br />
<br />
Plus it has a heater / ventilator...<br />
<br />
''''''''''''''''''''''''''''''''''''''''<br />
''''''''''''''''''''''''''''''''''''''''<br />
'' TELEMETRY ''''<br />
'' Maxon Data Radio @ 152.480 MHz ''''<br />
''''''''''''''''''''''''''''''''''''''''<br />
''''''''''''''''''''''''''''''''''''''''<br />
<br />
''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
''' SENSOR LIST '''''''''''''''''''''''''''''''''''<br />
''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
' Kipp and Zonen CNR-4 Net Radiometer<br />
' CS420 Lake Level Pressure Transducer<br />
' 107 Temperature Probe<br />
' CS100 Setra Barometric Pressure Sensor<br />
' MetOne 024A Wind Direction Sensor<br />
' MetOne 014A Wind Speed Sensor<br />
' Evaporation Pan Pressure Transducer<br />
' AM25T Thermocouple multiplexer with 18 connected thermocouples<br />
' Ott Pluvio Precipitation Gage<br />
' Tipping Bucket Rain Gage (?)<br />
' CMP6 Pyranometer<br />
' Li-Cor Quantum. Model LI-190SB<br />
' Li-Cor Underwater Quantum. LI-192SB<br />
' UVA_YES Pyranometer<br />
' UVB_YES Pyranometer<br />
' HMP45C AT/RH Sensor at 5m <br />
' RM Young 41382VF AT/RH Sensor at 3m<br />
<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
''' LOGGER WIRING ''''''''''''''''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
' SE1 -- <br />
' SE2 -- <br />
' SE3 -- <br />
' SE4 -- CNR4 Forest Floor Therm Hi, White Wire (double-check); Precision Resistor to VX2<br />
' SE5 -- CS420 Lake Level (Orange Wire)<br />
' SE6 -- CS420 Lake Level (Black Wire)<br />
' SE7 -- CS420 Lake Level (White Wire)<br />
' SE8 -- CS420 Lake Level (Yellow Wire Wire)<br />
' SE9 -- 107 Temperature Signal (Red Wire)<br />
' SE10 -- Barometric Pressure Signal (Yellow Wire) ## This is what I have from notes but it is contrary to what the CS100 manual says.<br />
' SE11 -- <br />
' SE12 -- <br />
' SE13 -- AM25T HI<br />
' SE14 -- AM25T LO<br />
' SE15 -- Met One 024A WD (Red Wire)<br />
' SE16 -- Evaporation (Red Wire)<br />
' SE17 -- <br />
' SE18 -- <br />
' SE19 -- AM16/32B HI<br />
' SE20 -- AM16/32B LO<br />
' SE21 -- <br />
' SE22 -- <br />
' SE23 -- <br />
' SE24 -- <br />
' SE25 -- <br />
' SE26 -- <br />
' SE27 -- <br />
' SE28 -- <br />
'<br />
'VX1 -- 107 Temperature Excite (Black Wire); Wind Direction Excite (Black Wire)<br />
'VX2 -- AM25T Excite (Yellow Wire); Precision Resistor to SE4<br />
'VX3 -- Evap Excite (White Wire)<br />
'VX4 -- CS420 Excite (Red Wire)<br />
'<br />
'P1 -- Empty<br />
'P2 -- 5m MetOne 014A Wind Speed (Black Wire)<br />
'P3 -- Ott Pluvio Rain (Green Wire)<br />
'P4 -- Rain 2 (NOT sure what this Is going To) (Red Wire)<br />
'<br />
'C1 -- AM25T RES (Red Wire)<br />
'C2 -- AM25T CLK (Yellow Wire); AM16/32B CLK<br />
'C3 -- Barometric Pressure CTRL<br />
'C4 -- AM16/32B RES<br />
'C5 -- SR50A SDI 12 (Green Wire)<br />
'C6 -- HMP45C CTRL (Orange Wire)<br />
'C7 -- CNR4 Fan Control (Maybe this could go to SW12V??)<br />
'C8 -- Empty <br />
<br />
<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
''' AM25T Wiring (HI = Blue Wire; LO = Red Wire) ''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
' Group1 -- EvapoTC<br />
' Group2 -- soil2_moss<br />
' Group3 -- soil2_5cm<br />
' Group4 -- soil2_10cm<br />
' Group5 -- soil2_20cm<br />
' Group6 -- soil2_50cm<br />
' Group7 -- soil2_100cm<br />
' Group8 -- soil2_150cm<br />
' Group9 -- LakeTC_C<br />
' Group10 -- NA10<br />
' Group11 -- NA11<br />
' Group12 -- soil1_moss<br />
' Group13 -- soil1_20cm<br />
' Group14 -- soil1_150cm<br />
' Group15 -- soil1_5cm<br />
' Group16 -- soil1_10cm<br />
' Group17 -- soil1_50cm<br />
' Group18 -- soil1_100cm<br />
<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
''' AM16/32B in 2/32 Mode Wiring '''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
' RES -- CR1000 C4<br />
' CLK -- CR1000 C2<br />
' COM ODD HI -- CR1000 SE19<br />
' COM ODD LO -- CR1000 SE20<br />
'Group1 HI CMP6 Pyranometer HI (Red Wire / Yellow Cable)<br />
' LO CMP6 Pyranometer LO (Blue Wire / Yellow Cable)<br />
'Group2 HI Li-Cor Quantum. Model LI-190SB HI (Red Wire)<br />
' LO Li-Cor Quantum. Model LI-190SB LO (Black Wire)<br />
'Group3 HI Li-Cor Underwater Quantum. LI-192SB HI (Red Wire)<br />
' LO Li-Cor Underwater Quantum. LI-192SB LO (Black Wire)<br />
'Group4 HI Differential Voltage measurements UVA_YES Watts/m2 HI (White Wire)<br />
' LO Differential Voltage measurements UVA_YES Watts/m2 LO (Black Wire)<br />
'Group5 HI Differential Voltage measurements UVB_YES Watts/m2 HI (White Wire)<br />
' LO Differential Voltage measurements UVB_YES Watts/m2 LO (Black Wire)<br />
'Group6 HI HMP45C at 5m AT HI (Yellow Wire) <br />
' LO HMP45C at 5m AT LO, Jumper To G7LO (Purple Wire)<br />
'Group7 HI HMP45C at 5m RH HI (Blue Wire)<br />
' LO HMP45C at 5m RH LO, Jumper To G6LO (Purple Wire)<br />
'Group8 HI RM Young 41382VF Air Temperature at 3m (Red Wire)<br />
' LO RM Young 41382VF Air Temperature at 3m, Jumper to Group 9 LO (Black Wire)<br />
'Group9 HI RM Young 41382VF Relative Humidity Sensor at 3m (Green Wire)<br />
' LO RM Young 41382VF Relative Humidity Sensor at 3m (Jumper to Group 8 LO)<br />
' CNR4 Left Yellow cable (Red-White Tape)<br />
' Group10 HI Pyranometer Upper Hi (Red Wire) <br />
' LO Pyranometer Upper Lo (Blue Wire)<br />
' Group11 HI Pyranometer Lower Hi (White Wire)<br />
' LO Pyranometer Lower Lo (Black Wire)<br />
' Group12 HI Pyrgeometer Upper Hi (Gray Wire) <br />
' LO Pyrgeometer Upper Lo (Yellow Wire)<br />
' Group13 HI Pyrgeometer Lower Hi (Brown Wire) <br />
' LO Pyrgeometer Lower Lo (Green Wire) <br />
' Shield -- AM16/32B Ground<br />
<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
'' Sensor Wiring ''''''''''''''''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
' Kipp and Zonen CGR-4<br />
' Red Wire -- CR1000 SE1<br />
' Blue Wire -- CR1000 SE2<br />
' Green Wire -- CR1000 SE4 & Precision Resistor to VX2<br />
<br />
' CS420 Lake Level Pressure Transducer<br />
' Orange Wire -- CR1000 SE5<br />
' Black Wire -- CR1000 SE6 <br />
' White Wire -- CR1000 SE7<br />
' Yellow Wire -- CR1000 SE8<br />
' Red Wire -- VX4<br />
' ____ Wires -- CR1000 Signal Ground<br />
<br />
' 107 Temperature Probe<br />
' Red Wire -- CR1000 SE9<br />
' Black Wire -- CR1000 Vx1<br />
' Purple Wire -- CR1000 Signal Ground<br />
' Clear Wire -- CR1000 Signal Ground<br />
<br />
' CS100 - Setra Model 278 Barometric Pressure<br />
' Need to get more info on site about the sensor wiring for this sensor. 5/2013<br />
' Yellow Wire -- CR1000 SE10<br />
' BP CTRL -- CR1000 C3<br />
' Other wiring... TBD<br />
<br />
' Met One 024A Wind Direction Sensor<br />
' Red Wire -- CR1000 SE15<br />
' Black Wire -- CR1000 VX1<br />
' White Wire -- CR1000 Signal Ground<br />
<br />
' MetOne 014A Wind Speed Sensor<br />
' Black Wire -- CR1000 P2<br />
' White Wire -- CR1000 Signal Ground<br />
' Clear Wire -- CR1000 Signal Ground<br />
<br />
' Evaporation Pan<br />
' Red Wire -- CR1000 SE16<br />
' White Wire -- CR1000 VX3 <br />
' TBD -- CR1000 Signal Ground<br />
<br />
' CMP6 Pyranometer<br />
' Red Wire -- AM16/32B Group 1 HI<br />
' Blue Wire -- AM16/32B Group 1 LO<br />
<br />
' Li-Cor Quantum Model LI-190SB <br />
' Red Wire -- AM16/32B Group 2 HI<br />
' Black Wire -- Am16/32B Group 2 LO<br />
<br />
' Li-Cor Underwater Quantum. LI-192SB<br />
' Red Wire -- AM16/32B Group 3 HI<br />
' Black Wire -- AM16/32B Group 3 LO<br />
<br />
' Yankee Environmental Systems UV A Pyranometer<br />
' White Wire -- AM16/32B Group 4 HI<br />
' Black Wire -- AM16/32B Group 4 LO<br />
<br />
' Yankee Environmental Systems UV B Pyranometer<br />
' White Wire -- AM16/32B Group 5 HI<br />
' Black Wire -- AM16/32B Group 5 LO<br />
<br />
' Vaisala HMP45C Air Temperature / Relative Humidity @ 5m<br />
' Yellow Wire -- AM16/32B Group 6 HI<br />
' Blue Wire -- AM16/32B Group 7 Hi<br />
' Purple Wire -- AM16/32B Group 6 & 7 LO<br />
' Orange Wire -- CR1000 C6<br />
' Red Wire -- CR100 12V<br />
' Black Wire -- CR1000 G<br />
' Clear Wire -- CR1000 G<br />
<br />
' RM Young 41382VF AT/RH @ 3m<br />
' Red Wire -- AM16/32B Group 8 HI<br />
' Green Wire -- AM16/32B Group 9 HI<br />
' Black Wire -- AM16/32B Group 8 & 9 LO<br />
<br />
' CNR4 Right Yellow cable <br />
' Thermistor Hi (White Wire) -- CR3000 SE4<br />
' Thermistor Lo (Black Wire) -- CR3000 AG<br />
' Precision Resistor -- CR3000 SE4 to CR3000 VX1<br />
' Shield -- CR3000 Ground</div>216.67.7.140http://ocotal.iarc.uaf.edu/index.php?title=TFS_Site_Wiring&diff=2012TFS Site Wiring2013-05-14T06:33:39Z<p>216.67.7.140: </p>
<hr />
<div>'''5/4/2013 Note:<br> Thinking about moving AT/RH and other sensors needing 12V power from AM1632B back to CR3000 for simpler wiring in the field'''<br />
<br />
<br />
Note, this will change since this has CGR4 rather than CNR4....<br />
Plus it has a heater / ventilator...<br />
<br />
''''''''''''''''''''''''''''''''''''''''<br />
''''''''''''''''''''''''''''''''''''''''<br />
'' TELEMETRY ''''<br />
'' Maxon Data Radio @ 152.480 MHz ''''<br />
''''''''''''''''''''''''''''''''''''''''<br />
''''''''''''''''''''''''''''''''''''''''<br />
<br />
''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
''' SENSOR LIST '''''''''''''''''''''''''''''''''''<br />
''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
' Kipp and Zonen CNR-4 Net Radiometer<br />
' CS420 Lake Level Pressure Transducer<br />
' 107 Temperature Probe<br />
' CS100 Setra Barometric Pressure Sensor<br />
' MetOne 024A Wind Direction Sensor<br />
' MetOne 014A Wind Speed Sensor<br />
' Evaporation Pan Pressure Transducer<br />
' AM25T Thermocouple multiplexer with 18 connected thermocouples<br />
' Ott Pluvio Precipitation Gage<br />
' Tipping Bucket Rain Gage (?)<br />
' CMP6 Pyranometer<br />
' Li-Cor Quantum. Model LI-190SB<br />
' Li-Cor Underwater Quantum. LI-192SB<br />
' UVA_YES Pyranometer<br />
' UVB_YES Pyranometer<br />
' HMP45C AT/RH Sensor at 5m <br />
' RM Young 41382VF AT/RH Sensor at 3m<br />
<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
''' LOGGER WIRING ''''''''''''''''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
' SE1 -- <br />
' SE2 -- <br />
' SE3 -- <br />
' SE4 -- CNR4 Forest Floor Therm Hi, White Wire (double-check); Precision Resistor to VX2<br />
' SE5 -- CS420 Lake Level (Orange Wire)<br />
' SE6 -- CS420 Lake Level (Black Wire)<br />
' SE7 -- CS420 Lake Level (White Wire)<br />
' SE8 -- CS420 Lake Level (Yellow Wire Wire)<br />
' SE9 -- 107 Temperature Signal (Red Wire)<br />
' SE10 -- Barometric Pressure Signal (Yellow Wire) ## This is what I have from notes but it is contrary to what the CS100 manual says.<br />
' SE11 -- <br />
' SE12 -- <br />
' SE13 -- AM25T HI<br />
' SE14 -- AM25T LO<br />
' SE15 -- Met One 024A WD (Red Wire)<br />
' SE16 -- Evaporation (Red Wire)<br />
' SE17 -- <br />
' SE18 -- <br />
' SE19 -- AM16/32B HI<br />
' SE20 -- AM16/32B LO<br />
' SE21 -- <br />
' SE22 -- <br />
' SE23 -- <br />
' SE24 -- <br />
' SE25 -- <br />
' SE26 -- <br />
' SE27 -- <br />
' SE28 -- <br />
'<br />
'VX1 -- 107 Temperature Excite (Black Wire); Wind Direction Excite (Black Wire)<br />
'VX2 -- AM25T Excite (Yellow Wire); Precision Resistor to SE4<br />
'VX3 -- Evap Excite (White Wire)<br />
'VX4 -- CS420 Excite (Red Wire)<br />
'<br />
'P1 -- Empty<br />
'P2 -- 5m MetOne 014A Wind Speed (Black Wire)<br />
'P3 -- Ott Pluvio Rain (Green Wire)<br />
'P4 -- Rain 2 (NOT sure what this Is going To) (Red Wire)<br />
'<br />
'C1 -- AM25T RES (Red Wire)<br />
'C2 -- AM25T CLK (Yellow Wire); AM16/32B CLK<br />
'C3 -- Barometric Pressure CTRL<br />
'C4 -- AM16/32B RES<br />
'C5 -- SR50A SDI 12 (Green Wire)<br />
'C6 -- HMP45C CTRL (Orange Wire)<br />
'C7 -- CNR4 Fan Control (Maybe this could go to SW12V??)<br />
'C8 -- Empty <br />
<br />
<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
''' AM25T Wiring (HI = Blue Wire; LO = Red Wire) ''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
' Group1 -- EvapoTC<br />
' Group2 -- soil2_moss<br />
' Group3 -- soil2_5cm<br />
' Group4 -- soil2_10cm<br />
' Group5 -- soil2_20cm<br />
' Group6 -- soil2_50cm<br />
' Group7 -- soil2_100cm<br />
' Group8 -- soil2_150cm<br />
' Group9 -- LakeTC_C<br />
' Group10 -- NA10<br />
' Group11 -- NA11<br />
' Group12 -- soil1_moss<br />
' Group13 -- soil1_20cm<br />
' Group14 -- soil1_150cm<br />
' Group15 -- soil1_5cm<br />
' Group16 -- soil1_10cm<br />
' Group17 -- soil1_50cm<br />
' Group18 -- soil1_100cm<br />
<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
''' AM16/32B in 2/32 Mode Wiring '''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
' RES -- CR1000 C4<br />
' CLK -- CR1000 C2<br />
' COM ODD HI -- CR1000 SE19<br />
' COM ODD LO -- CR1000 SE20<br />
'Group1 HI CMP6 Pyranometer HI (Red Wire / Yellow Cable)<br />
' LO CMP6 Pyranometer LO (Blue Wire / Yellow Cable)<br />
'Group2 HI Li-Cor Quantum. Model LI-190SB HI (Red Wire)<br />
' LO Li-Cor Quantum. Model LI-190SB LO (Black Wire)<br />
'Group3 HI Li-Cor Underwater Quantum. LI-192SB HI (Red Wire)<br />
' LO Li-Cor Underwater Quantum. LI-192SB LO (Black Wire)<br />
'Group4 HI Differential Voltage measurements UVA_YES Watts/m2 HI (White Wire)<br />
' LO Differential Voltage measurements UVA_YES Watts/m2 LO (Black Wire)<br />
'Group5 HI Differential Voltage measurements UVB_YES Watts/m2 HI (White Wire)<br />
' LO Differential Voltage measurements UVB_YES Watts/m2 LO (Black Wire)<br />
'Group6 HI HMP45C at 5m AT HI (Yellow Wire) <br />
' LO HMP45C at 5m AT LO, Jumper To G7LO (Purple Wire)<br />
'Group7 HI HMP45C at 5m RH HI (Blue Wire)<br />
' LO HMP45C at 5m RH LO, Jumper To G6LO (Purple Wire)<br />
'Group8 HI RM Young 41382VF Air Temperature at 3m (Red Wire)<br />
' LO RM Young 41382VF Air Temperature at 3m, Jumper to Group 9 LO (Black Wire)<br />
'Group9 HI RM Young 41382VF Relative Humidity Sensor at 3m (Green Wire)<br />
' LO RM Young 41382VF Relative Humidity Sensor at 3m (Jumper to Group 8 LO)<br />
' CNR4 Left Yellow cable (Red-White Tape)<br />
' Group10 HI Pyranometer Upper Hi (Red Wire) <br />
' LO Pyranometer Upper Lo (Blue Wire)<br />
' Group11 HI Pyranometer Lower Hi (White Wire)<br />
' LO Pyranometer Lower Lo (Black Wire)<br />
' Group12 HI Pyrgeometer Upper Hi (Gray Wire) <br />
' LO Pyrgeometer Upper Lo (Yellow Wire)<br />
' Group13 HI Pyrgeometer Lower Hi (Brown Wire) <br />
' LO Pyrgeometer Lower Lo (Green Wire) <br />
' Shield -- AM16/32B Ground<br />
<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
'' Sensor Wiring ''''''''''''''''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''<br />
' Kipp and Zonen CGR-4<br />
' Red Wire -- CR1000 SE1<br />
' Blue Wire -- CR1000 SE2<br />
' Green Wire -- CR1000 SE4 & Precision Resistor to VX2<br />
<br />
' CS420 Lake Level Pressure Transducer<br />
' Orange Wire -- CR1000 SE5<br />
' Black Wire -- CR1000 SE6 <br />
' White Wire -- CR1000 SE7<br />
' Yellow Wire -- CR1000 SE8<br />
' Red Wire -- VX4<br />
' ____ Wires -- CR1000 Signal Ground<br />
<br />
' 107 Temperature Probe<br />
' Red Wire -- CR1000 SE9<br />
' Black Wire -- CR1000 Vx1<br />
' Purple Wire -- CR1000 Signal Ground<br />
' Clear Wire -- CR1000 Signal Ground<br />
<br />
' CS100 - Setra Model 278 Barometric Pressure<br />
' Need to get more info on site about the sensor wiring for this sensor. 5/2013<br />
' Yellow Wire -- CR1000 SE10<br />
' BP CTRL -- CR1000 C3<br />
' Other wiring... TBD<br />
<br />
' Met One 024A Wind Direction Sensor<br />
' Red Wire -- CR1000 SE15<br />
' Black Wire -- CR1000 VX1<br />
' White Wire -- CR1000 Signal Ground<br />
<br />
' MetOne 014A Wind Speed Sensor<br />
' Black Wire -- CR1000 P2<br />
' White Wire -- CR1000 Signal Ground<br />
' Clear Wire -- CR1000 Signal Ground<br />
<br />
' Evaporation Pan<br />
' Red Wire -- CR1000 SE16<br />
' White Wire -- CR1000 VX3 <br />
' TBD -- CR1000 Signal Ground<br />
<br />
' CMP6 Pyranometer<br />
' Red Wire -- AM16/32B Group 1 HI<br />
' Blue Wire -- AM16/32B Group 1 LO<br />
<br />
' Li-Cor Quantum Model LI-190SB <br />
' Red Wire -- AM16/32B Group 2 HI<br />
' Black Wire -- Am16/32B Group 2 LO<br />
<br />
' Li-Cor Underwater Quantum. LI-192SB<br />
' Red Wire -- AM16/32B Group 3 HI<br />
' Black Wire -- AM16/32B Group 3 LO<br />
<br />
' Yankee Environmental Systems UV A Pyranometer<br />
' White Wire -- AM16/32B Group 4 HI<br />
' Black Wire -- AM16/32B Group 4 LO<br />
<br />
' Yankee Environmental Systems UV B Pyranometer<br />
' White Wire -- AM16/32B Group 5 HI<br />
' Black Wire -- AM16/32B Group 5 LO<br />
<br />
' Vaisala HMP45C Air Temperature / Relative Humidity @ 5m<br />
' Yellow Wire -- AM16/32B Group 6 HI<br />
' Blue Wire -- AM16/32B Group 7 Hi<br />
' Purple Wire -- AM16/32B Group 6 & 7 LO<br />
' Orange Wire -- CR1000 C6<br />
' Red Wire -- CR100 12V<br />
' Black Wire -- CR1000 G<br />
' Clear Wire -- CR1000 G<br />
<br />
' RM Young 41382VF AT/RH @ 3m<br />
' Red Wire -- AM16/32B Group 8 HI<br />
' Green Wire -- AM16/32B Group 9 HI<br />
' Black Wire -- AM16/32B Group 8 & 9 LO<br />
<br />
' CNR4 Right Yellow cable <br />
' Thermistor Hi (White Wire) -- CR3000 SE4<br />
' Thermistor Lo (Black Wire) -- CR3000 AG<br />
' Precision Resistor -- CR3000 SE4 to CR3000 VX1<br />
' Shield -- CR3000 Ground</div>216.67.7.140http://ocotal.iarc.uaf.edu/index.php?title=Jessie_Cherry_May_2013_Toolik_Trip&diff=1992Jessie Cherry May 2013 Toolik Trip2013-05-13T04:50:15Z<p>216.67.7.140: /* To add to program */</p>
<hr />
<div>== Overview ==<br />
<br />
The met station at Toolik needs to be transferred from its tripod to a tower. The field requirements for this assignment will be outlined here. <br />
<br />
'''Any other information not here but could be anticipated as being useful?'''<br />
* Where is the CNR4 going<br />
<br />
==To add to program==<br />
* Change CGR4 to CNR4<br />
* Add SR50A<br />
* download current program off cr3000 to see how the RM Young at/rh coefficients are (maybe default is english units or something like that)<br />
* Add PAR quantum to 5 min table<br />
* Put CNR4 on 5 min and 1 hour table<br />
<br />
==Random info==<br />
<br />
After you get to camp, ask the staff to fill up the truck with gas and this should go on the 'STAFF Account' because you are working as staff on this trip<br />
<br />
Chad has agreed to give you tower training on Friday morning, the 17th.<br />
<br />
==To Bring from Fairbanks==<br />
* Cabling to extend thermocouple temperature profile from old enclosure to new enclosure.<br />
* shovels for digging out buried cabling<br />
* extension cord for moving power from old tripod to new tower<br />
* cable splicing tools for anything that might need extending<br />
** soldering iron<br />
** butane<br />
** propane torch<br />
** solder<br />
** heat shrink<br />
* extra cabling<br />
* Toolbags<br />
* XX Extra data logger (CR1000, for any instruments that aren't transferred to the new logger on this trip and or don't reach... completely just a back up item)<br />
* XX small actionpacker<br />
* sled<br />
* Climbing harness<br />
* CNR4 Radiometer<br />
** Also bring Precision Resistor for measuring CGR4 Thermistor<br />
** Also need to update program with calibration constants for this sensor.<br />
<br />
== Current Equipment On-Site==<br />
* New tower w/ enclosure & guy wires<br />
* Garden web cam<br />
* Pluvio 1 (Currently installed but broken)<br />
* Met Station w/ soil thermocouples, radiation, lake sensors on rusted tripod<br />
* New Multiplexer<br />
* Pluvio 2 (needs to be installed but is in the environmental data center)... has a different base than the existing one.<br />
* Pluvio 2 base is inside the wyoming gauge snow fence sitting on the ground<br />
* Get comm working on Snow Particle Counter IP: 137.229.91.90<br />
<br />
== Goals ==<br />
* Mount recalibrated AT/RH sensors<br />
* Move power to the new enclosure<br />
* Transfer as much equipment as possible to new tower<br />
* Leave what can't be moved at the old site<br />
* Install Pluvio 2 <br />
** note, pluvio 1 wire is a bit short. but should be okay with pluvio 2<br />
* Get evaporation pan working [maybe more like just inspect it to make sure it could work with the parts that were quoted from Campbell. Measure it's size, take pictures, and confirm model, if possible. If not, no worries. I'll work on it in June. <br />
* Install new radiometer<br />
* Tighten guy wires and level tower<br />
<br />
== Needs ==<br />
* Submit two TAs for Patrick and Bob so you can get a partial per diem and cover the gas money (Jessie is working on this)<br />
* [[TFS Site Wiring]] / cable lengths <br />
* List cable types needed '''''?'''''<br />
* List muxes needed '''''?'''''<br />
<br />
==List equipment/tools need to bring==<br />
<br />
* Conduit<br />
* New Program (Bob Bu has draft) - Direct Link emailed 5/4/2013<br />
** Program Git Archive:<br />
*** [Bob's DropBox]/logger_programs/toolik_tfs/TFScamp_CR3000.CR3<br />
* Troubleshoot Evaporation Pan<br />
* Figure out what needs calibration<br />
<br />
== Updates ==<br />
<br />
* Pluvio 1 and Pluvio 2 use different base stands. Make sure to include the Pluvio 2 mounting hardware!<br />
* Evaporation pan may not be in the budget this year if the gauging unit (Campbell 21531) needs to be replaced.<br />
* Conduit isn't an immediate priority since this depends on the final setup.</div>216.67.7.140http://ocotal.iarc.uaf.edu/index.php?title=Jessie_Cherry_May_2013_Toolik_Trip&diff=1991Jessie Cherry May 2013 Toolik Trip2013-05-13T04:47:06Z<p>216.67.7.140: /* Current Equipment On-Site */</p>
<hr />
<div>== Overview ==<br />
<br />
The met station at Toolik needs to be transferred from its tripod to a tower. The field requirements for this assignment will be outlined here. <br />
<br />
'''Any other information not here but could be anticipated as being useful?'''<br />
* Where is the CNR4 going<br />
<br />
==To add to program==<br />
* Change CGR4 to CNR4<br />
* Add SR50A<br />
* download current program off cr3000 to see how the RM Young at/rh coefficients are (maybe default is english units or something like that)<br />
<br />
==Random info==<br />
<br />
After you get to camp, ask the staff to fill up the truck with gas and this should go on the 'STAFF Account' because you are working as staff on this trip<br />
<br />
Chad has agreed to give you tower training on Friday morning, the 17th.<br />
<br />
==To Bring from Fairbanks==<br />
* Cabling to extend thermocouple temperature profile from old enclosure to new enclosure.<br />
* shovels for digging out buried cabling<br />
* extension cord for moving power from old tripod to new tower<br />
* cable splicing tools for anything that might need extending<br />
** soldering iron<br />
** butane<br />
** propane torch<br />
** solder<br />
** heat shrink<br />
* extra cabling<br />
* Toolbags<br />
* XX Extra data logger (CR1000, for any instruments that aren't transferred to the new logger on this trip and or don't reach... completely just a back up item)<br />
* XX small actionpacker<br />
* sled<br />
* Climbing harness<br />
* CNR4 Radiometer<br />
** Also bring Precision Resistor for measuring CGR4 Thermistor<br />
** Also need to update program with calibration constants for this sensor.<br />
<br />
== Current Equipment On-Site==<br />
* New tower w/ enclosure & guy wires<br />
* Garden web cam<br />
* Pluvio 1 (Currently installed but broken)<br />
* Met Station w/ soil thermocouples, radiation, lake sensors on rusted tripod<br />
* New Multiplexer<br />
* Pluvio 2 (needs to be installed but is in the environmental data center)... has a different base than the existing one.<br />
* Pluvio 2 base is inside the wyoming gauge snow fence sitting on the ground<br />
* Get comm working on Snow Particle Counter IP: 137.229.91.90<br />
<br />
== Goals ==<br />
* Mount recalibrated AT/RH sensors<br />
* Move power to the new enclosure<br />
* Transfer as much equipment as possible to new tower<br />
* Leave what can't be moved at the old site<br />
* Install Pluvio 2 <br />
** note, pluvio 1 wire is a bit short. but should be okay with pluvio 2<br />
* Get evaporation pan working [maybe more like just inspect it to make sure it could work with the parts that were quoted from Campbell. Measure it's size, take pictures, and confirm model, if possible. If not, no worries. I'll work on it in June. <br />
* Install new radiometer<br />
* Tighten guy wires and level tower<br />
<br />
== Needs ==<br />
* Submit two TAs for Patrick and Bob so you can get a partial per diem and cover the gas money (Jessie is working on this)<br />
* [[TFS Site Wiring]] / cable lengths <br />
* List cable types needed '''''?'''''<br />
* List muxes needed '''''?'''''<br />
<br />
==List equipment/tools need to bring==<br />
<br />
* Conduit<br />
* New Program (Bob Bu has draft) - Direct Link emailed 5/4/2013<br />
** Program Git Archive:<br />
*** [Bob's DropBox]/logger_programs/toolik_tfs/TFScamp_CR3000.CR3<br />
* Troubleshoot Evaporation Pan<br />
* Figure out what needs calibration<br />
<br />
== Updates ==<br />
<br />
* Pluvio 1 and Pluvio 2 use different base stands. Make sure to include the Pluvio 2 mounting hardware!<br />
* Evaporation pan may not be in the budget this year if the gauging unit (Campbell 21531) needs to be replaced.<br />
* Conduit isn't an immediate priority since this depends on the final setup.</div>216.67.7.140