2019 NGEE Nome June Trip - Revision history

Bob: /* Teller CAS */

2021-02-02T19:16:53Z

Teller CAS

172.18.0.1: /* Skookum */

2019-06-18T19:33:57Z

Skookum

172.18.0.1: /* Post Trip Notes */

2019-06-18T19:33:17Z

Post Trip Notes

172.18.0.1: /* Post Trip Notes */

2019-06-18T19:31:13Z

Post Trip Notes

172.18.0.1: /* Post Trip Notes */

2019-06-18T02:43:47Z

Post Trip Notes

172.18.0.1: /* Post Trip Notes */

2019-06-18T02:19:57Z

Post Trip Notes

172.18.0.1 at 01:39, 18 June 2019

2019-06-18T01:39:12Z

172.18.0.1: /* UAF Storage */

2019-06-09T18:32:51Z

UAF Storage

172.18.0.1: /* Friday */

2019-06-09T17:43:43Z

Friday

172.18.0.1: /* UAF Storage */

2019-06-09T17:43:01Z

UAF Storage

@@ Line 7: / Line 7: @@
 ====Teller CAS====
-** Tripod Mast Bent
+[[Teller CAS]]
-** CNR4 difficult to level
+* Tripod Mast Bent
-** Could use a some help keeping lower anemometer from moving.  Like maybe a couple pieces of unistrut to keep arm from wobbling
+* CNR4 difficult to level
-** Need to replace lower AT/RH as it seems completely broken.
+* Could use a some help keeping lower anemometer from moving.  Like maybe a couple pieces of unistrut to keep arm from wobbling
-*** Rotronic HygroClip2 HC2A
+* Need to replace lower AT/RH as it seems completely broken.
-*** Should look to see if they sell a better top cap for it more resistant to moisture
+** Rotronic HygroClip2 HC2A
-** Need to get some SW12V adapter to turn AT/RH on/off and look at program / wiring for other things that could be turned off.
+** Should look to see if they sell a better top cap for it more resistant to moisture
-** Left 2 guy wire anchors and 100' of guy wire at UAF Storage.  Could bring out more anchors or unistrut / nails or something.  Maybe pound unistrut into ground and then pin in place?
+* Need to get some SW12V adapter to turn AT/RH on/off and look at program / wiring for other things that could be turned off.
-** I thought Geonor and Solar Panel would require guying but both survived the winter while tripod mast didn't.
+* Left 2 guy wire anchors and 100' of guy wire at UAF Storage.  Could bring out more anchors or unistrut / nails or something.  Maybe pound unistrut into ground and then pin in place?
-** I think snow sensor maybe failed over the winter, too.
+* I thought Geonor and Solar Panel would require guying but both survived the winter while tripod mast didn't.
-** I was thinking a heavier gauge cable for solar panel might be appropriate, too.
+* I think snow sensor maybe failed over the winter, too.
 ====Nome CAS====
 ** Same suggestion for SW12V adapters

@@ Line 60: / Line 60: @@
 ** switched back to array based OS
 ** sent program which turns radio off more aggressively.
 ===Bolton to bring from Fairbanks===

@@ Line 1: / Line 1: @@
 ===Post Trip Notes===
-* Teller Surveying
+====Teller Surveying====
 ** Reread John's email and compare coordinates
 *** ~/Dropbox/uaf/GIS/2019 John Peterson
@@ Line 6: / Line 6: @@
 ** Resurveyed all Stop signs... I am worrying I used wrong rover height.  Like maybe it should have been 48.5" rather than what I specified.
-* Teller CAS
+====Teller CAS====
 ** Tripod Mast Bent
 ** CNR4 difficult to level
@@ Line 18: / Line 18: @@
 ** I think snow sensor maybe failed over the winter, too.
 ** I was thinking a heavier gauge cable for solar panel might be appropriate, too.
-* Nome CAS
+====Nome CAS====
 ** Same suggestion for SW12V adapters
 ** Perhaps bump up the # of batteries, too?
 ** Another option would be to add the charge controller I have to monitor energy use?... or deploy at super site Geonor?
-* Teller Top
+====Teller Top====
 ** Site good I think.. will need to review data
 ** Not quite 100% actually.  Precip stand could use a bit of help but I can't remember what... ask Bob.
 ** leveled precip bucket
 ** replaced radiometer desiccant
-* Teller Bottom
+====Teller Bottom====
 ** Some of the Decagon sensors have failed but I found some spares in Nome storage.  Might replace them in fall?
 ** Look rest of data over.
@@ Line 33: / Line 33: @@
 ** leveled tipping bucket
 ** replaced desiccant in radiometers
-* Teller SW
+====Teller SW====
 ** Look over data
 ** finish working up creek discharge
-* NGEE Kougarok Site
+====NGEE Kougarok Site====
 ** precip good
 ** need to verify peak directions and compass angles to lock in offset for anemometer.
 ** replaced desiccant and leveled radiometers
 ** most sensors looked good but a couple not, maybe SR50A and one or two of the decagon units.
-* Kougarok Met Tower
+====Kougarok Met Tower====
 ** All data great I think but will need to process
 ** replaced desiccant and leveled radiometers
 ** leveled tipping bucket
-* Kougarok Burn Site
+====Kougarok Burn Site====
 ** All data great I think but will need to process (only accessed by radio)
-* Kougarok Mauze Gulch Site
+====Kougarok Mauze Gulch Site ====
 ** did not try to reach
-* Council Grid Site
+====Council Grid Site====
 ** Still need to redrill hole for thermistor
 ** I see that soil moisture data is still working so will need to work that up
@@ Line 57: / Line 57: @@
 ** made a temporary splice for precip cable and raised connection above inundation (hopefully)
 *** expecting this will need to be redone before animals wander by
-* Skookum
+====Skookum====
 ** switched back to array based OS
 ** sent program which turns radio off more aggressively.

@@ Line 36: / Line 36: @@
 ** Look over data
 ** finish working up creek discharge
 * Kougarok Met Tower
 ** All data great I think but will need to process

@@ Line 1: / Line 1: @@
 ===Post Trip Notes===
 * Teller CAS
 ** Tripod Mast Bent

← Older revision		Revision as of 01:39, 18 June 2019
Line 1:		Line 1:
		+	===Post Trip Notes===
		+	* Teller CAS
		+	** Tripod Mast Bent
		+	** CNR4 difficult to level
		+	** Could use a some help keeping lower anemometer from moving. Like maybe a couple pieces of unistrut to keep arm from wobbling
		+	** Need to replace lower AT/RH as it seems completely broken.
		+	*** Rotronic HygroClip2 HC2A
		+	*** Should look to see if they sell a better top cap for it more resistant to moisture
		+	** Need to get some SW12V adapter to turn AT/RH on/off and look at program / wiring for other things that could be turned off.
		+	** Left 2 guy wire anchors and 100' of guy wire at UAF Storage. Could bring out more anchors or unistrut / nails or something. Maybe pound unistrut into ground and then pin in place?
		+	** I thought Geonor and Solar Panel would require guying but both survived the winter while tripod mast didn't.
		+	** I think snow sensor maybe failed over the winter, too.
		+	* Nome CAS
		+	** Same suggestion for SW12V adapters
		+	** Perhaps bump up the # of batteries, too?
		+	** Another option would be to add the charge controller I have to monitor energy use?... or deploy at super site Geonor?
		+	* Teller Top
		+	** Site good I think.. will need to review data
		+	** Not quite 100% actually. Precip stand could use a bit of help but I can't remember what... ask Bob.
		+	** leveled precip bucket
		+	** replaced radiometer desiccant
		+	* Teller Bottom
		+	** Some of the Decagon sensors have failed but I found some spares in Nome storage. Might replace them in fall?
		+	** Look rest of data over.
		+	** bring out self-tapping screws and drill to add more help to keep tipping bucket from being removed.
		+	** leveled tipping bucket
		+	** replaced desiccant in radiometers
		+	* Teller SW
		+	** Look over data
		+	** finish working up creek discharge
		+	* Kougarok Met Tower
		+	** All data great I think but will need to process
		+	** replaced desiccant and leveled radiometers
		+	** leveled tipping bucket
		+	* Kougarok Burn Site
		+	** All data great I think but will need to process (only accessed by radio)
		+	* Kougarok Mauze Gulch Site
		+	** did not try to reach
		+	* Council Grid Site
		+	** Still need to redrill hole for thermistor
		+	** I see that soil moisture data is still working so will need to work that up
		+	** replaced antenna with yagi and new coax.
		+	*** looks like now have a weak radio link again.
		+	** moved radio to main instrument box
		+	** made a temporary splice for precip cable and raised connection above inundation (hopefully)
		+	*** expecting this will need to be redone before animals wander by
		+	* Skookum
		+	** switched back to array based OS
		+	** sent program which turns radio off more aggressively.
		+
	===Bolton to bring from Fairbanks===		===Bolton to bring from Fairbanks===
	* SonTek FlowTracker (long black pelican case)		* SonTek FlowTracker (long black pelican case)

@@ Line 19: / Line 19: @@
 * radio kit for Kougarok sites
 * guy wire anchors for Teller CAS
 ====NW Campus====

@@ Line 105: / Line 105: @@
 ===Friday===
 * Meet CAS team at Noonish
 ===Saturday===