Ibmet - Revision history

137.229.77.32: /* 04 Sept 2007, Ken I. */

2008-06-06T20:21:27Z

04 Sept 2007, Ken I.

137.229.77.32: /* site logs */

2008-06-06T20:20:28Z

site logs

137.229.33.196 at 03:37, 1 August 2007

2007-08-01T03:37:58Z

imported>Ken at 20:42, 3 July 2007

2007-07-03T20:42:02Z

imported>Ken: /* RMYoung to logger & multiplexer wiring details */

2007-07-03T20:41:27Z

RMYoung to logger & multiplexer wiring details

imported>Ken at 20:39, 3 July 2007

2007-07-03T20:39:44Z

imported>Ken at 20:38, 3 July 2007

2007-07-03T20:38:20Z

New page

= Imnavait ''B-site'' met =

{{todo}}

=site logs=

== 15 June 2007, Ken I., Doug K. ==

* reconnected RMYoung wiring at sensor wiring box to nominal:
** WS SIG -- RED -- 6
** WS REF -- BLK -- 2
** WD EX -- BLU -- 5
** WD SIG -- GRN -- 4
** WD REF -- WHT -- 3
** DRAIN -- CLR -- 1

* used spare piece of 05103-CSI cable at logger-shack end:
** per program listing with timestamp 07jun07 02:35:43
** WS is on C7
** WD on SE3 (which is multiplexer)

* wiring from logger to multiplexer:
** SE3 -- CLR -- COM H1
** SE4 -- BLK -- COM L1
** AG -- BLK -- COM L2
** E2 -- RED -- COM H2

* connected 10m WS to P1 & G via wiring board terminal blocks, at lower left, left to right, from multiplexer to sensor on tower:
** empty
** empty
** mplx 7L2 -- BLK -- WHT to sensor
** mplx 7H1 -- BLK -- GRN
** mplx 7H2 -- RED -- BLU
** CR10X P1 -- RED
** CR10X G -- BLK

* spliced sensor-to-4C cable at either end:
** WHT -- WHT cable 1
** GRN -- GRN cable 1
** BLU -- RED cable 1
** RED -- RED cable 2
** BLK -- BLK cable 2

← Older revision		Revision as of 20:21, 6 June 2008
Line 14:		Line 14:
	* set to slave/rep mode 4, 9600 baud		* set to slave/rep mode 4, 9600 baud

		+	* Problem talking to site so went back to Imn Met (same day)
		+	* radio tested conn to UK rep, good
		+	* logger checked through all cables and connectors, no probs

	== 16 July 2007, Ken I. ==		== 16 July 2007, Ken I. ==

← Older revision		Revision as of 20:20, 6 June 2008
Line 4:		Line 4:

	=site logs=		=site logs=
		+
		+	== 04 Sept 2007, Ken I. ==
		+	* rewired new logger box
		+	* moved ant to tower
		+	* pulled old cables, conduit
		+	* left radio set and yagi on old logger at shack, but radio is DEAD
		+	* installed spare DGR: 906-6035
		+	* tested conn to UK rep
		+	* set to slave/rep mode 4, 9600 baud
		+

	== 16 July 2007, Ken I. ==		== 16 July 2007, Ken I. ==

← Older revision		Revision as of 03:37, 1 August 2007
Line 4:		Line 4:

	=site logs=		=site logs=
		+
		+	== 16 July 2007, Ken I. ==
		+	* serviced evaporation pan, at 0925 AKST
		+	* water level too low for gauge
		+	* w/ hook gage set at 1.00, approx. 2.9 cm down to water level from the hook point
		+	* added 2 jugs, or 14 gal (52 L)
		+	* hook gage read at 2.7258

	== 15 June 2007, Ken I., Doug K. ==		== 15 June 2007, Ken I., Doug K. ==

@@ Line 14: / Line 14: @@
 *** WD REF -- WHT -- 3
 *** DRAIN -- CLR -- 1
 ** used spare piece of 05103-CSI cable at logger-shack end:
 *** per program listing with timestamp 07jun07 02:35:43
 *** WS is on C7
 *** WD on SE3 (which is multiplexer)
 ** wiring from logger to multiplexer:
 *** SE3 -- CLR -- COM H1
@@ Line 25: / Line 23: @@
 *** AG -- BLK -- COM L2
 *** E2 -- RED -- COM H2
 ** connected 10m WS to P1 & G via wiring board terminal blocks, at lower left, left to right, from multiplexer to sensor on tower:
 *** empty
@@ Line 34: / Line 31: @@
 *** CR10X P1 -- RED
 *** CR10X G -- BLK
 ** spliced sensor-to-4C cable at either end:
 *** WHT -- WHT cable 1

@@ Line 7: / Line 7: @@
 == 15 June 2007, Ken I., Doug K. ==
 * fixed 10m RMYoung wiring, details follow:
-=== RMYoung to logger & multiplexer wiring details ===
+** reconnected RMYoung wiring at sensor wiring box to nominal:
-* reconnected RMYoung wiring at sensor wiring box to nominal:
+*** WS SIG -- RED -- 6
-** WS SIG -- RED -- 6
+*** WS REF -- BLK -- 2
-** WS REF -- BLK -- 2
+*** WD EX -- BLU -- 5
-** WD EX -- BLU -- 5
+*** WD SIG -- GRN -- 4
-** WD SIG -- GRN -- 4
+*** WD REF -- WHT -- 3
-** WD REF -- WHT -- 3
+*** DRAIN -- CLR -- 1
-* used spare piece of 05103-CSI cable at logger-shack end:
+** used spare piece of 05103-CSI cable at logger-shack end:
-** per program listing with timestamp 07jun07 02:35:43
+*** per program listing with timestamp 07jun07 02:35:43
-** WS is on C7
+*** WS is on C7
-** WD on SE3 (which is multiplexer)
+*** WD on SE3 (which is multiplexer)
-* wiring from logger to multiplexer:
+** wiring from logger to multiplexer:
-** SE3 -- CLR -- COM H1
+*** SE3 -- CLR -- COM H1
-** SE4 -- BLK -- COM L1
+*** SE4 -- BLK -- COM L1
-** AG -- BLK -- COM L2
+*** AG -- BLK -- COM L2
-** E2 -- RED -- COM H2
+*** E2 -- RED -- COM H2
-* connected 10m WS to P1 & G via wiring board terminal blocks, at lower left, left to right, from multiplexer to sensor on tower:
+** connected 10m WS to P1 & G via wiring board terminal blocks, at lower left, left to right, from multiplexer to sensor on tower:
-** empty
+*** empty
-** empty
+*** empty
-** mplx 7L2 -- BLK -- WHT to sensor
+*** mplx 7L2 -- BLK -- WHT to sensor
-** mplx 7H1 -- BLK -- GRN
+*** mplx 7H1 -- BLK -- GRN
-** mplx 7H2 -- RED -- BLU
+*** mplx 7H2 -- RED -- BLU
-** CR10X P1 -- RED
+*** CR10X P1 -- RED
-** CR10X G -- BLK
+*** CR10X G -- BLK
-* spliced sensor-to-4C cable at either end:
+** spliced sensor-to-4C cable at either end:
-** WHT -- WHT cable 1
+*** WHT -- WHT cable 1
-** GRN -- GRN cable 1
+*** GRN -- GRN cable 1
-** BLU -- RED cable 1
+*** BLU -- RED cable 1
-** RED -- RED cable 2
+*** RED -- RED cable 2
-** BLK -- BLK cable 2
+*** BLK -- BLK cable 2