NGEE December 2014 Barrow - Revision history

imported>Lcohen at 02:09, 4 December 2014

2014-12-04T02:09:29Z

imported>Lcohen at 01:10, 4 December 2014

2014-12-04T01:10:53Z

imported>Lcohen at 00:50, 4 December 2014

2014-12-04T00:50:14Z

137.229.29.86 at 21:55, 3 December 2014

2014-12-03T21:55:22Z

imported>Lcohen at 20:51, 3 December 2014

2014-12-03T20:51:07Z

137.229.29.86 at 20:26, 3 December 2014

2014-12-03T20:26:19Z

imported>Lcohen at 19:50, 3 December 2014

2014-12-03T19:50:11Z

137.229.29.86 at 19:47, 3 December 2014

2014-12-03T19:47:22Z

New page

== 12/5/2014 ==
* 9:45 Arrive at Airport
* 11:15am Fly to Barrow, on Alaska Flight 2817
* 6:10pm arrival
* 7:00pm Safety Training & Barrow Introduction (maybe?)

==12/6/2014==
* 9am Snowmachine training
* 9:30am Snowmachine to control shed
*
* Any other odds or ends?

* Be prepared to be outside in the cold for 7 hours though

Tools list:
* charged laptop
* laptop power cable
* putty installed on it
* serial cable
* Network cable (5 -10 feet long to stretch from dreamplug mounted on wall to the desk.

@@ Line 51: / Line 51: @@
 #### iface eth0 inet static
 #### address 199.165.126.165
-#if still not working swap dreamplugs
+#if still not working, plug serial cable directly into toughbook

@@ Line 47: / Line 47: @@
 ### cd = change directory.  so, like cd .. or cd /etc/ or cd /home/bob/bin. invoking that command will take you different places.  Also, to denote directories in linux you'll use the forward slash as shown there so /home/bob/bin is three directories in from the ''root'' directory.
 ### exit --> this is how you log out
-### shutdown now -r --> slightly more complex, typing this will restart the dreamplug.
+### shutdown now -r --> slightly more complex, typing this will restart the dreamplug. need to do this after changing interface file
 ### nano /etc/network/interfaces --> couple of changes I anticipate making:
 #### iface eth0 inet static
 #### address 199.165.126.165
-#swap dreamplugs
+#if still not working swap dreamplugs

@@ Line 16: / Line 16: @@
 ==How I think things will work==
 # Gain access to the control shed
-# Look to see if the lights are active on the dreamplug (ie is it getting power)
+# Look to see if the lights are active on the dreamplug (ie is it getting power. 3 of 4 should be on)
-# If yes...
+#* If no, check power supply, replace if necessary
-## Try using ''PUTTY'' to ssh to the dreamplug.
+#* If yes...
-## First, disconnect the port 1 ethernet cable, which connects to the webcam
+# disconnect the port 1 ethernet cable, which connects to the webcam (disable wireless on toughbook)
-## connect another ethernet cable between port 1 on the dreamplug and the laptop
+#*connect another ethernet cable between port 1 on the dreamplug and the laptop
-## when you connect your laptop to the dreamplug if it is working fine it should dynamically supply an IP address using DHCP
+#* when you connect your laptop to the dreamplug if it is working fine it should dynamically supply an IP address using DHCP
-## IP address for the server will be '''192.168.1.1'''; port initially is '''22''' ''(if we use the replacement dreamplug the port will be '''20593''')''; user will be ''bob''
+#* IP address for the server will be '''192.168.1.1'''; port initially is '''22''' ''(if we use the replacement dreamplug the port will be '''20593''')''; user will be ''bob''
 ## If you're able to log in... awesome!
 ### let's try a few commands then.  Here are some commands:
@@ Line 39: / Line 51: @@
 #### iface eth0 inet static
 #### address 199.165.126.165
-# After all of that is done:
+#swap dreamplugs

@@ Line 18: / Line 18: @@
 # Look to see if the lights are active on the dreamplug (ie is it getting power)
 # If yes...
-## Try using //PUTTY// to ssh to the dreamplug.
+## Try using ''PUTTY'' to ssh to the dreamplug.
 ## First, disconnect the port 1 ethernet cable, which connects to the webcam
 ## connect another ethernet cable between port 1 on the dreamplug and the laptop
 ## when you connect your laptop to the dreamplug if it is working fine it should dynamically supply an IP address using DHCP
-## IP address for the server will be 192.168.1.1; port initially is 22; user will be bob
+## IP address for the server will be '''192.168.1.1'''; port initially is '''22''' ''(if we use the replacement dreamplug the port will be '''20593''')''; user will be ''bob''
 ## If you're able to log in... awesome!
 ### let's try a few commands then.  Here are some commands:
@@ Line 36: / Line 36: @@
 ### exit --> this is how you log out
 ### shutdown now -r --> slightly more complex, typing this will restart the dreamplug.
-### nano /etc/network/interfaces --> I
+### nano /etc/network/interfaces --> couple of changes I anticipate making:
+#### iface eth0 inet static

← Older revision		Revision as of 20:51, 3 December 2014
Line 47:		Line 47:
	* Network cable (5 -10 feet long to stretch from dreamplug mounted on wall to the desk.		* Network cable (5 -10 feet long to stretch from dreamplug mounted on wall to the desk.
	* Cell phone and charger		* Cell phone and charger
		+	* Camera

@@ Line 10: / Line 10: @@
+*
 * Any other odds or ends?
-* Be prepared to be outside in the cold for 7 hours though

← Older revision		Revision as of 19:50, 3 December 2014
Line 21:		Line 21:
	* serial cable		* serial cable
	* Network cable (5 -10 feet long to stretch from dreamplug mounted on wall to the desk.		* Network cable (5 -10 feet long to stretch from dreamplug mounted on wall to the desk.
		+	* Cell phone and charger