Difference between revisions of "SS Feb 2011 Trip 1"
Jump to navigation
Jump to search
| Line 2: | Line 2: | ||
* Software updates | * Software updates | ||
* wifi check | * wifi check | ||
| + | ** Replace Antenna | ||
| + | *** drill out holes if needed to support the 1/4" hardware | ||
| + | *** Mount Vertically (Horn points up) | ||
| + | *** Aim new Antenna | ||
| + | *** seal coax again | ||
| + | *** cut off the old tapes | ||
| + | * Maybe reduce insulation in tower box | ||
* use loggernet remote to add diagnostics logger to schedule | * use loggernet remote to add diagnostics logger to schedule | ||
* setup keys with www3 | * setup keys with www3 | ||
| − | ** download | + | ** download IPs |
** upload data | ** upload data | ||
* load temperature monitoring python program onto the toughbook with the seconds fix | * load temperature monitoring python program onto the toughbook with the seconds fix | ||
* modify rsync to use new key. | * modify rsync to use new key. | ||
* check out file permissions deal for the diagnostics logger. | * check out file permissions deal for the diagnostics logger. | ||
| + | * copy new setup files or at least everything I can onto a thumb drive. | ||
To Bring: | To Bring: | ||
* tool bags & voltmeter | * tool bags & voltmeter | ||
| − | * | + | ** crescent wrench (cheap ubolt nuts) |
| + | ** 7/16 nut driver (for the 1/4" hardware) | ||
| + | ** 1/4" drill bit & drill (for drilling out the holes if needed) | ||
| + | ** 7/16" wrench (for the 1/4" hardware | ||
| + | ** knife (for cutting old spicing tape off | ||
| + | ** rubber splicing tape | ||
| + | ** black electrical tape | ||
* field book | * field book | ||
| + | |||
| + | To Buy: | ||
| + | * 1/4" hardware X 8 pieces (1" x 1/4-20 nylock, bolt, washers) | ||
| + | |||
| + | For the new computer setup: | ||
ip=$(cat junk1_ip) | ip=$(cat junk1_ip) | ||
scp -C -P8000 -i junk.id_rsa data.dat frank@$ip:~/data/ | scp -C -P8000 -i junk.id_rsa data.dat frank@$ip:~/data/ | ||
| + | |||
| + | To check on the antenna signal: | ||
| + | sudo apt-get install wavemon | ||
| + | iwconfig | ||
Latest revision as of 17:48, 11 March 2011
On site todo:
- Software updates
- wifi check
- Replace Antenna
- drill out holes if needed to support the 1/4" hardware
- Mount Vertically (Horn points up)
- Aim new Antenna
- seal coax again
- cut off the old tapes
- Replace Antenna
- Maybe reduce insulation in tower box
- use loggernet remote to add diagnostics logger to schedule
- setup keys with www3
- download IPs
- upload data
- load temperature monitoring python program onto the toughbook with the seconds fix
- modify rsync to use new key.
- check out file permissions deal for the diagnostics logger.
- copy new setup files or at least everything I can onto a thumb drive.
To Bring:
- tool bags & voltmeter
- crescent wrench (cheap ubolt nuts)
- 7/16 nut driver (for the 1/4" hardware)
- 1/4" drill bit & drill (for drilling out the holes if needed)
- 7/16" wrench (for the 1/4" hardware
- knife (for cutting old spicing tape off
- rubber splicing tape
- black electrical tape
- field book
To Buy:
- 1/4" hardware X 8 pieces (1" x 1/4-20 nylock, bolt, washers)
For the new computer setup:
ip=$(cat junk1_ip) scp -C -P8000 -i junk.id_rsa data.dat frank@$ip:~/data/
To check on the antenna signal:
sudo apt-get install wavemon iwconfig
