Difference between revisions of "NGEE Barrow 2013 Site Install Trip"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
==May 2013 Trip== | ==May 2013 Trip== | ||
| − | Purpose: | + | ===Purpose: === |
* Rewire Grid Site station with CR1000 & new multiplexers | * Rewire Grid Site station with CR1000 & new multiplexers | ||
* Setup MD485s to get Grid online | * Setup MD485s to get Grid online | ||
| Line 8: | Line 8: | ||
* Bring back shotgun | * Bring back shotgun | ||
* slather anticorrosion goo on all 12V/G points? | * slather anticorrosion goo on all 12V/G points? | ||
| + | * Record Thermal Conductivity Heater Resistance using a high-accuracy ohmmeter | ||
===Shipping=== | ===Shipping=== | ||
* None | * None | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
===To Purchase=== | ===To Purchase=== | ||
| − | * ? | + | * Anti-Corrosion Goo |
| + | * Ziplocs | ||
| + | * In Barrow: | ||
| + | ** Butane | ||
| + | * Food? | ||
===Pre-trip to do=== | ===Pre-trip to do=== | ||
| − | + | * Read up on CR1000 Pakbus Routing | |
| − | + | * Pack | |
| − | |||
| − | * | ||
| − | * | ||
===Stuff to bring=== | ===Stuff to bring=== | ||
| Line 44: | Line 31: | ||
* GPS | * GPS | ||
* 4 Precision Resistors for new logger | * 4 Precision Resistors for new logger | ||
| − | + | * High Precision Voltmeter | |
==== Technical Gear ==== | ==== Technical Gear ==== | ||
| Line 69: | Line 56: | ||
# Transfer wires to new multiplexer & Logger | # Transfer wires to new multiplexer & Logger | ||
# Snowsurveys | # Snowsurveys | ||
| + | # Measure Heater Resistances for all thermal conductivity probes | ||
| + | # Look to see if the C site pit 2 thermal conductivity sensors could be connected to a lower instrument enclosure. | ||
Revision as of 14:49, 4 May 2013
Contents
May 2013 Trip
Purpose:
- Rewire Grid Site station with CR1000 & new multiplexers
- Setup MD485s to get Grid online
- reconfigure Site C CR1000 for act as a pakbus router
- Snow Surveys
- Any other prep that's possible for the June trip
- Bring back shotgun
- slather anticorrosion goo on all 12V/G points?
- Record Thermal Conductivity Heater Resistance using a high-accuracy ohmmeter
Shipping
- None
To Purchase
- Anti-Corrosion Goo
- Ziplocs
- In Barrow:
- Butane
- Food?
Pre-trip to do
- Read up on CR1000 Pakbus Routing
- Pack
Stuff to bring
- Adirondack Tube
- Scale
- Thaw Probe
- Ziplocs
- GPS
- 4 Precision Resistors for new logger
- High Precision Voltmeter
Technical Gear
- Shotgun -- in Barrow already
- Keypads
- fish tape
- Tool Bags
- Computer & (packed) SC32B
- Climbing harness
- Serial Cables & spares
- Sawzall
- drill
Food to bring out
- Optional
Probable Luggage
- Bob Personal Actionpacker [Bob #1]
- Work Actionpacker #1 [Bob #2]
Rough on-site todo
- Copy wiring of Grid Site
- Transfer wires to new multiplexer & Logger
- Snowsurveys
- Measure Heater Resistances for all thermal conductivity probes
- Look to see if the C site pit 2 thermal conductivity sensors could be connected to a lower instrument enclosure.
