Spring 2016 site visit

• take photos of sensors without pics on instrumentation site
• bring measuring cup set for leveling UVA and UVB sensors
• wire junction to split all instruments needing 12V from logger

• install new evap pan
  • bring marine epoxy in case there is a leak
• swap in fancier wind sensor
• fill in serial numbers of all instruments/loggers on google sheet
• calibrate tipping bucket
  • fill bottle to line, use smallest orifice, do this 3 times
  • should be 30mm per bottle, so 90mm total
  • change multiplier in program if necessary
• do accuracy test on Pluvio
  • received software in ftp from ott (on my fancy laptop, need to transfer to toughbook)
  • need usb cable
• CANOE out to figure all of underwater sensors out!
  • inspect pressure transducer and change desiccant
  • figure out what is measuring temperature
  • swap underwater quantum
• swap out HMP155s
• swap out quantum sensors
  • bring mini wrench to replace them
  • figure out what the connection is like at toolik
  • change calibration constant?
• download garden cam images
  • bring replacement batteries
• we zero out the CMP6, but not the CNR4. reconsider?
• swap CNR4
  • change program calibration constants
• change UVA + UVB program calibration constants: UVA:0.0221, UVB: 0.00178 (per Lija's email)
• remove old radio
• get field books from Brie

• To change on instrumentation website
  • pluvio is actually version 2
  • lake temp measurement
  • barometer

• to bring
  • laptop + charger
  • tipping bucket calibration box
  • gloves, hat(warm and sun)
  • tools
  • marine epoxy
  • hiking boots,rubber boots
  • instruments
    • anemometer
    • CNR4