Difference between revisions of "Spring 2016 site visit"

Revision as of 13:00, 2 June 2016

install new evap pan
- leak test (marine epoxy in case
- clean out bottom
swap in fancier wind sensor
fill in serial numbers of all instruments/loggers on google sheet
calibrate tipping bucket
- fill bottle to line, use smallest orifice, do this 3 times
- should be 30mm per bottle, so 90mm total
- change multiplier in program if necessary
do accuracy test on Pluvio
- received software in ftp from ott (on my fancy laptop, need to transfer to toughbook)
- need usb cable
CANOE out to figure all of underwater sensors out!
- inspect pressure transducer and change desiccant
- figure out what is measuring temperature
- swap underwater quantum
swap out HMP155s
swap out quantum sensors
- bring mini wrench to replace them
- figure out what the connection is like at toolik
- change calibration constant?
download garden cam images
- bring replacement batteries
we zero out the CMP6, but not the CNR4. reconsider?
swap CNR4
- change program calibration constants
change UVA + UVB program calibration constants: UVA:0.0221, UVB: 0.00178 (per Lija's email)
remove old radio
get field books from Brie

To change on instrumentation website
- pluvio is actually version 2
- lake temp measurement
- barometer

@@ Line 4: / Line 4: @@
 *install new evap pan
-**bring marine epoxy in case there is a leak
+**leak test (marine epoxy in case
+**clean out bottom
 *swap in fancier wind sensor
 *fill in serial numbers of all instruments/loggers on google sheet
@@ Line 43: / Line 44: @@
 **tools
 **marine epoxy
+**wire junction
 **hiking boots,rubber boots
 **instruments
 ***anemometer
 ***CNR4