Spring 2016 site visit

• take photos of sensors without pics on instrumentation site
• bring measuring cup set for leveling UVA and UVB sensors
• wire junction to split all instruments needing 12V from logger

• install new evap pan
  • leak test (marine epoxy in case of leaks. should be up in the EDC office)
  • clean out bottom
• swap in fancier wind sensor
• fill in serial numbers of all instruments/loggers on google sheet
• calibrate tipping bucket
  • fill bottle to line, use smallest orifice, do this 3 times
  • should be 30mm per bottle, so 90mm total
  • change multiplier in program if necessary
• do accuracy test on Pluvio
  • received software in ftp from ott (on my fancy laptop, need to transfer to toughbook)
  • need usb cable

• • swap underwater quantum
• swap out HMP155s
  • write down which height is which SN
• swap out quantum sensors
  • bring mini wrench to replace them
  • figure out what the connection is like at toolik
  • change calibration constant?
• download garden cam images
  • bring replacement batteries
• we zero out the CMP6, but not the CNR4. reconsider?
• swap CNR4
• install new barometer
  • change program calibration constants
• change UVA + UVB program calibration constants: UVA:0.0221, UVB: 0.00178 (per Lija's email)
• remove old radio
• get field books from Brie

• To change on instrumentation website
  • pluvio is actually version 2
  • lake temp measurement
  • barometer

• to bring
  • laptop + charger
  • field laptop + charger
  • tipping bucket calibration box
  • gloves, hat(warm and sun)
  • tools
  • wire junction
  • hiking boots,rubber boots
  • field book
  • usb cable for pluvio
  • cookies for brie
  • instruments
    • anemometer
    • CNR4
    • Two HMP155s