Difference between revisions of "Teller Lower Station"
Jump to navigation
Jump to search
| Line 2: | Line 2: | ||
===To Bring:=== | ===To Bring:=== | ||
| − | * Put the 3m tripod built from tripod kit here. | + | * Put the 3m tripod built from tripod kit here. (The heaviest steel tripod, blue tape on it) |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
* Battery box in basement needs holes cut for 1/2" liquid-tite (ship battery box filled with instruments | * Battery box in basement needs holes cut for 1/2" liquid-tite (ship battery box filled with instruments | ||
* Instrument box with 1 CR1000 and AM416 is on site | * Instrument box with 1 CR1000 and AM416 is on site | ||
| Line 19: | Line 14: | ||
** used cross arm brackets last time... need to dig them out and make sure we have enough. | ** used cross arm brackets last time... need to dig them out and make sure we have enough. | ||
** also could use ubolts and unistrut. | ** also could use ubolts and unistrut. | ||
| + | ====Cross Arms==== | ||
| + | * Net Radiometer skin temperature | ||
| + | ** need to track down unistrut & strut clamps for stabilization (or ubolts) | ||
| + | * small cross arm for air temperature | ||
| + | * RM Young should mount to top without issue. | ||
| + | * Precip stand is already out there | ||
| + | * Need to figure out where NDVI sensors point. & do we have all supplies for that... | ||
| + | |||
===Sensors=== | ===Sensors=== | ||
| Line 38: | Line 41: | ||
* CNR4 w/bracket | * CNR4 w/bracket | ||
| + | ===Extras=== | ||
| + | * need to yet sort out how Met AM16/32 will attach | ||
| + | * need to drill out second instrument box so that cables can enter. | ||
| + | * Need to permanentify the solar panel | ||
| + | ** bring solar panel from Fairbanks and but need to make a mount for it yet. | ||
| + | * Measure East30 sensor resistance | ||
| + | * label all subsurface sensors | ||
| + | * Need to survey in all instruments with GPS | ||
| + | * Reuse batteries that are already out here, no new batteries needed. | ||
| + | * think about how to mount iridium here... | ||
To Ship: | To Ship: | ||
* Tripod | * Tripod | ||
* | * | ||
Revision as of 22:37, 2 August 2016
Tape Color is BLUE
To Bring:
- Put the 3m tripod built from tripod kit here. (The heaviest steel tripod, blue tape on it)
- Battery box in basement needs holes cut for 1/2" liquid-tite (ship battery box filled with instruments
- Instrument box with 1 CR1000 and AM416 is on site
- Bring a second instrument box with 1 AM16/32 for met instruments.
Outstanding Tripod items
- Cross arm support brackets and such
- mount am16/32 to second instrument box
- send instruments & battery box on second freight run
- Stabilizer for net radiometer support arm.
- used cross arm brackets last time... need to dig them out and make sure we have enough.
- also could use ubolts and unistrut.
Cross Arms
- Net Radiometer skin temperature
- need to track down unistrut & strut clamps for stabilization (or ubolts)
- small cross arm for air temperature
- RM Young should mount to top without issue.
- Precip stand is already out there
- Need to figure out where NDVI sensors point. & do we have all supplies for that...
Sensors
To Bring:
- 015103 WS/WD
- Make up cable for it
- CR200 for measuring Pressure Transducers
- 5 pcs VITEL Hydraprobe II
- Need to set IDs
- 4 pcs East30 sensors thermal conductivity or specific heat
- also interface board
- also measure the heater resistance of each
- Cable protection
- cable ties & hose clamps for securing cabling to tripod
Already at site:
- HMP155
- thinking about bringing out a replacement temperature head though because the one in place has been on the fritz over the summer.
- TE525MM
- CNR4 w/bracket
Extras
- need to yet sort out how Met AM16/32 will attach
- need to drill out second instrument box so that cables can enter.
- Need to permanentify the solar panel
- bring solar panel from Fairbanks and but need to make a mount for it yet.
- Measure East30 sensor resistance
- label all subsurface sensors
- Need to survey in all instruments with GPS
- Reuse batteries that are already out here, no new batteries needed.
- think about how to mount iridium here...
To Ship:
- Tripod
