Difference between revisions of "Teller Lower Station"

From IARC 207 Wiki
Jump to navigation Jump to search
Line 1: Line 1:
 
Tape Color is '''BLUE'''
 
Tape Color is '''BLUE'''
  
−
===To Bring:===
+
===In Nome Storage:===
−
 
+
* jumpers for last battery
−
===Outstanding Items===
+
* soil sampling cylinders for soil pit
−
* Make Discharge Measurement
 
−
** Tools:
 
−
** Cloth Tape
 
−
* Need to bring out
 
−
* 1" Al pipe for away from tripod snow stand... can skinny pipe be made to work?
 
−
** Tools: 1/2" nut driver / wrench
 
−
* Declination is 11 degrees... correct this later using datapro function.
 
−
* XX use battery box tarp to flop soil pit lid onto.
 
−
** tape measure
 
−
** saw
 
−
** tarp
 
−
** shovel
 
−
* camera power
 
−
* XX terminal strips for SDI 12 devices.
 
−
* XX 1"x1ft stub for net radiation
 
−
* XX guy wires for snow stand
 
−
* mount camera
 
−
* fix program problems:
 
−
** Resistance logging
 
−
** soil temperature logging
 
−
** check to see that east 30 sensors are good with the jumper wire in place
 
−
**
 
−
 
 
−
====Cross Arms====
 
−
* Net Radiometer skin temperature
 
−
** need to track down unistrut & strut clamps for stabilization (or ubolts)
 
−
* small cross arm for air temperature
 
−
* RM Young should mount to top without issue.
 
−
* Precip stand is already out there
 
−
* Need to figure out where NDVI sensors point. & do we have all supplies for that...
 
−
 
 
−
 
 
−
===Sensors===
 
−
====To Bring:====
 
−
* 015103 WS/WD
 
−
** Make up cable for it
 
−
* CR200 for measuring Pressure Transducers
 
−
* ''5 pcs'' VITEL Hydraprobe II
 
−
* ''4 pcs'' East30 sensors thermal conductivity or specific heat
 
−
** also interface board
 
−
** also measure the heater resistance of each
 
−
* Cable protection
 
−
* cable ties & hose clamps for securing cabling to tripod
 
−
* VATP 1504 - see email for thermistor calibration offsets
 
−
 
 
−
====Sensor Heights====
 
−
* Anemometer @ top of tripod  / ~3 meters
 
−
* HMP155 @ 1.5m above ground surface
 
−
* Barometric Pressure - in instrument box
 
−
* Net Radiation -
 
−
* Snow Temperature profile -- ground surface in the shrubs
 
−
* Snow Depth 1 -- 2m on cross arm off station
 
−
* Snow Depth 2 -- in shrubs on a stand.
 
−
 
 
−
 
 
−
Already at site:
 
−
* HMP155
 
−
** thinking about bringing out a replacement temperature head though because the one in place has been on the fritz over the summer.
 
−
* TE525MM
 
−
* CNR4 w/bracket
 
−
* Two Batteries
 
−
* Solar Panel
 
−
* Charge Controller
 
−
 
 
−
 
 
  
 +
===At Site===
 +
* duct seal for all connections
 +
* soil pit sensors in large actionpacker
  
 
===Extras===
 
===Extras===
 
* think about how to mount iridium here...
 
* think about how to mount iridium here...
 
*Bring covers from Fairbanks to cover unitstrut ends like tennis balls.
 
*Bring covers from Fairbanks to cover unitstrut ends like tennis balls.
 +
 +
===Left to fix===
 +
* Decagon SRS sensors... test again in Fairbanks
 +
* Thermal Conductivity sensors... figure out their deal...
 +
 +
* Review fieldbook

Revision as of 14:43, 19 August 2016

Tape Color is BLUE

In Nome Storage:

  • jumpers for last battery
  • soil sampling cylinders for soil pit

At Site

  • duct seal for all connections
  • soil pit sensors in large actionpacker

Extras

  • think about how to mount iridium here...
  • Bring covers from Fairbanks to cover unitstrut ends like tennis balls.

Left to fix

  • Decagon SRS sensors... test again in Fairbanks
  • Thermal Conductivity sensors... figure out their deal...
  • Review fieldbook
Retrieved from "http://ocotal.iarc.uaf.edu/index.php?title=Teller_Lower_Station&oldid=2823"