Difference between revisions of "Spring 2017 visit"
Jump to navigation
Jump to search
Line 4: | Line 4: | ||
** change program controls for heater | ** change program controls for heater | ||
** bring up couple SW12V | ** bring up couple SW12V | ||
+ | *change desiccant in CNR4 | ||
*stabilize underwater par sensor with second string for cleaning | *stabilize underwater par sensor with second string for cleaning | ||
*add terrestrial quantum to sensor wiring notes at top of program | *add terrestrial quantum to sensor wiring notes at top of program |
Revision as of 10:00, 12 May 2017
- Check out the status of the heater wiring for CNR4
- is it even wired? to which ports?
- change the program notes if wired
- change program controls for heater
- bring up couple SW12V
- change desiccant in CNR4
- stabilize underwater par sensor with second string for cleaning
- add terrestrial quantum to sensor wiring notes at top of program
- check what the calconnector looks like for lake PAR.
- maybe need to buy a second one so can coordinate with calibration swaps
- its reading negative because the sensor head was swapped wrong, but this isn't an issue.
- change notes in program where measure pressure to change CS100 to CS106
- remove sea level offset
- get serial number for radios
- get height of terrestrial PAR
- check if pluvio is pointing north