Difference between revisions of "Pin Outs"
Jump to navigation
Jump to search
imported>Ekyoucha |
imported>Ekyoucha |
||
| Line 1: | Line 1: | ||
| − | + | 1990s PIR: PT06A-12-10S amphenol connector or PT06W-12-10S with a MS3420-4 and MS3420 sleeve | |
| − | PIR pin outs: | + | 1990s PIR pin outs: |
**A radiometer thermopile low - black | **A radiometer thermopile low - black | ||
**C radiometer thermopile hi + red | **C radiometer thermopile hi + red | ||
| Line 10: | Line 10: | ||
**J not used | **J not used | ||
**K not used | **K not used | ||
| + | **YSI 44031 (thermistor model) | ||
| − | + | 1980s PIR: PT06W-10-6S amphenol connector with various MS3420 sleeves | |
| − | |||
| − | |||
* oldest 1980s (?) PIRs: What is the pinouts for thises units? Answer from Eppley: | * oldest 1980s (?) PIRs: What is the pinouts for thises units? Answer from Eppley: | ||
It depends on the age of the PIR as the 6 pin connectors were used before the dome thermistors were included standard and then we switched to the 10 pins. | It depends on the age of the PIR as the 6 pin connectors were used before the dome thermistors were included standard and then we switched to the 10 pins. | ||
However, certain customers continued to request the 6 pin in some cases. The wiring of the 6 pin PIR is probably: | However, certain customers continued to request the 6 pin in some cases. The wiring of the 6 pin PIR is probably: | ||
| − | A: Thermopile (-) black | + | **A: Thermopile (-) black |
| − | B: Thermopile (+) red | + | **B: Thermopile (+) red |
| − | C: Case Thermistor white | + | **C: Case Thermistor white |
| − | D: Case Thermistor green | + | **D: Case Thermistor green |
| − | E: Instrument Ground or Dome Thermistor brown | + | **E: Instrument Ground or Dome Thermistor brown |
| − | F: not used or Dome Thermistor blue | + | **F: not used or Dome Thermistor blue |
Shield is the Ground | Shield is the Ground | ||
Revision as of 10:12, 29 June 2017
1990s PIR: PT06A-12-10S amphenol connector or PT06W-12-10S with a MS3420-4 and MS3420 sleeve 1990s PIR pin outs:
- A radiometer thermopile low - black
- C radiometer thermopile hi + red
- D case thermistor required - white
- E case thermistor required - green
- F dome thermistor optional - brown
- G dome thermistor optional - blue
- H Case ground (shield?)
- J not used
- K not used
- YSI 44031 (thermistor model)
1980s PIR: PT06W-10-6S amphenol connector with various MS3420 sleeves
- oldest 1980s (?) PIRs: What is the pinouts for thises units? Answer from Eppley:
It depends on the age of the PIR as the 6 pin connectors were used before the dome thermistors were included standard and then we switched to the 10 pins. However, certain customers continued to request the 6 pin in some cases. The wiring of the 6 pin PIR is probably:
- A: Thermopile (-) black
- B: Thermopile (+) red
- C: Case Thermistor white
- D: Case Thermistor green
- E: Instrument Ground or Dome Thermistor brown
- F: not used or Dome Thermistor blue
Shield is the Ground
