Difference between revisions of "SS To Do Next Visit"

From IARC 207 Wiki
Jump to navigation Jump to search
Line 1: Line 1:
  
 
===2018===
 
===2018===
* Replace tower aspirator fans:
 
 
** https://catalog.orientalmotor.com/viewitems/mb-series-ac-centrifugal-fans-blowers/mb-series-50mm-centrifugal-fans-blowers
 
** https://catalog.orientalmotor.com/viewitems/mb-series-ac-centrifugal-fans-blowers/mb-series-50mm-centrifugal-fans-blowers
** I need to confirm that this unit is the correct one.  The one I took a picture of operates at 110VAC but I think some of the others operate at a lower voltage.
 
** 7/6/18 yes all are 110VAC
 
* Deploy sensor refresh instruments from March.
 
* Buy a new HMP155 for forest floor site
 
 
* More PAR sensors and hardware for in-situ
 
* More PAR sensors and hardware for in-situ
 
* Buy another SI-111 SDI12 model
 
* Buy another SI-111 SDI12 model
 
* Attend LI-COR training?
 
* Attend LI-COR training?
 
* Polish Battery Backup System
 
* Polish Battery Backup System
* Tower Top CNR4 longwave thermistor wasn't fixed on last visit after all...
 
<pre>
 
'' CNR4 Tower Top
 
'' CNR4 Left Yellow cable (Red-White Tape)
 
'' CNR4 Right Yellow cable (Red-Black Tape)
 
'' Thermistor Hi (White Wire) -- CR1000 SE8
 
'' Thermistor Lo (Black Wire) -- CR1000 AG
 
'' Precision Resistor -- CR1000 SE8 to CR1000 VX1
 
'' Shield -- CR1000 Ground
 
</pre>
 
 
* replace Loggernet computer
 
* replace Loggernet computer
 +
** bring out an NL100 or USB to serial adapter
 
* Submit PRs for Summer 2018 Instrument Recalibrations
 
* Submit PRs for Summer 2018 Instrument Recalibrations
 
** Vaisala HMP155s
 
** Vaisala HMP155s
Line 29: Line 15:
 
Ss soil has room on c7 for sdi12 rest or sr50a are on c3, c4 is open for other stuff.
 
Ss soil has room on c7 for sdi12 rest or sr50a are on c3, c4 is open for other stuff.
 
Just moved cs616 to 5v to see if that does anything. Need to confirm this doesn't mess up and create noise in signals.
 
Just moved cs616 to 5v to see if that does anything. Need to confirm this doesn't mess up and create noise in signals.
 +
* Replace SR50A transducers
 +
* Dig second pit for soil instruments
 +
* clean up outdoor power cords
 +
* waterproof a bit some of the tower blowers (might be as easy as more cable ties / tape to keep the white box deals right side up.
 +
* I brought out a collection of one and two hole deals for securing loose cabling here and there in and out of the shed.  That could be sorted out.
 +
* connect those shop power strips and get one more for inside?
 +
* SI111 install
 +
* buy and add more PAR top and bottom (4x and matching hardware)
 +
* add another tipping bucket.

Revision as of 13:21, 1 August 2018

2018

Ss soil has room on c7 for sdi12 rest or sr50a are on c3, c4 is open for other stuff. Just moved cs616 to 5v to see if that does anything. Need to confirm this doesn't mess up and create noise in signals.

  • Replace SR50A transducers
  • Dig second pit for soil instruments
  • clean up outdoor power cords
  • waterproof a bit some of the tower blowers (might be as easy as more cable ties / tape to keep the white box deals right side up.
  • I brought out a collection of one and two hole deals for securing loose cabling here and there in and out of the shed. That could be sorted out.
  • connect those shop power strips and get one more for inside?
  • SI111 install
  • buy and add more PAR top and bottom (4x and matching hardware)
  • add another tipping bucket.