Difference between revisions of "SS To Do Next Visit"

Revision as of 10:40, 28 May 2021

XX Get Dropbox syncing going again for eddy data and met data
Location for SWE sensor
Make sure we can make the two tripods.
Check 6m AT/RH wiring.
- I think we replaced it in March 2021 but it is still acting up so likely to be a cabling issue again.
Check on Soil Pit 2 Soil temp #4... maybe this is a datapro thing.
Send away anemometers
send away HMP155s
check calibration budget
try to buy CFM100s for soil and met loggers
Redo the forests floor AT/RH bracket.

change ss_soil soil moisture to period averaging method to reduce overranging
add leaf wetness sensor to geonor again?
change sdi12 instruction for ss_ff_rad snow to output quality number... looks to be zero.
Check ss_soil_2 datapro config for soil temp 4 which shows good data while connected to station but nan on webpage.

For SWE tripods:
- 1 Inch Schedule 40 pipe, 10ft, 6pcs (leg / leg brace)
- 1.5 inch schedule 40 pipe, 10 ft, 2 pcs (mast)
- phenocam parts... 2" pvc maybe plus rubber gasket and what else?

Photograph tag & equipment for:
- LICOR units (tower & forest)
  - Property Tag 36113 (I think this may be Y Kim)
  - Property Tag 36114 (I think this may be Y Kim)
- 3 CR1000s
  - Property Tag 36104
  - Property Tag 36106
  - Property Tag 36117
Might add a SR50A to the soil pit
might add a SI111 to the soil pit
might add a UPS for the heat flux logger system in case there are power problems
- the network switch connecting the toughbook to the LI7200 and the LI7200 to the fluxprocessor
Need to find out OS version of tower wind master pro
need to remove battery from sky cam laptop
bring out NL100/200.
error message associated with heat flux memory card... replace memory card.
order a LiCor network cable for forest floor.

- https://catalog.orientalmotor.com/viewitems/mb-series-ac-centrifugal-fans-blowers/mb-series-50mm-centrifugal-fans-blowers
More PAR sensors and hardware for in-situ
Polish Battery Backup System
replace Loggernet computer
- bring out an NL100 or USB to serial adapter
Submit PRs for Summer 2018 Instrument Recalibrations
- Vaisala HMP155s
- MetOne 010C
- Kipp & Zonen CNR4
Late Fall recalibrations:
- LI-7200s

Ss soil has room on c5 for sdi12 rest or sr50a are on c3, c4 is open for other stuff.

Just moved cs616 to 5v to see if that does anything. Need to confirm this doesn't mess up and create noise in signals.

Replace SR50A transducers
Dig second pit for soil instruments
clean up outdoor power cords
waterproof a bit some of the tower blowers (might be as easy as more cable ties / tape to keep the white box deals right side up.
I brought out a collection of one and two hole deals for securing loose cabling here and there in and out of the shed. That could be sorted out.
connect those shop power strips and get one more for inside?
buy and add more PAR top and bottom (4x and matching hardware)
add another tipping bucket.
bring solder out for ff atrh blower and electrical goo

@@ Line 4: / Line 4: @@
 * https://docs.google.com/document/d/1oWPf0fkpGD2vz_pspbcvLZecad_XLVn2EDaAP5bg3O4/edit?pli=1
 ===2021===
-* Get Dropbox syncing going again for eddy data and met data
+* XX Get Dropbox syncing going again for eddy data and met data
 * Location for SWE sensor
 * Make sure we can make the two tripods.
@@ Line 14: / Line 14: @@
 * check calibration budget
 * try to buy CFM100s for soil and met loggers
+* Redo the forests floor AT/RH bracket.
 ====Program Change====
@@ Line 25: / Line 26: @@
 * ss_soil_2 -- need to add sm_profile.dat and snow.dat to automated processing.
 * ss_ff_rad -- need to add snow to automated processing.
+===To Purchase===
+* For SWE tripods:
+** 1 Inch Schedule 40 pipe, 10ft, 6pcs (leg / leg brace)
+** 1.5 inch schedule 40 pipe, 10 ft, 2 pcs (mast)
+** phenocam parts... 2" pvc maybe plus rubber gasket and what else?
 ===2019===