Difference between revisions of "Snow Depth Stand"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
** 1pcs 5' 3/4 schedule 40 pipe / rigid electrical conduit. | ** 1pcs 5' 3/4 schedule 40 pipe / rigid electrical conduit. | ||
* Vertical adjustable elevation pipe | * Vertical adjustable elevation pipe | ||
| − | ** 1pcs | + | ** 1pcs 6' 3/4 schedule 40 pipe / rigid conduit (short stand) |
| + | ** 1pcs 10' 3/4 schedule 40 pipe / rigid conduit (tall stand) | ||
* Diagonal support pipe | * Diagonal support pipe | ||
| − | ** 1pcs | + | ** 1pcs 4' 3/4 schedule 40 pipe / rigid conduit |
* Ground support | * Ground support | ||
** 2pcs 5' Slotted Unistrut | ** 2pcs 5' Slotted Unistrut | ||
Revision as of 16:15, 16 August 2021
Current Parts List
- Snow Depth Sensor
- 1 SR50A
- Snow depth sensor pipe mount
- Horizontal top pipe
- 1pcs 5' 3/4 schedule 40 pipe / rigid electrical conduit.
- Vertical adjustable elevation pipe
- 1pcs 6' 3/4 schedule 40 pipe / rigid conduit (short stand)
- 1pcs 10' 3/4 schedule 40 pipe / rigid conduit (tall stand)
- Diagonal support pipe
- 1pcs 4' 3/4 schedule 40 pipe / rigid conduit
- Ground support
- 2pcs 5' Slotted Unistrut
- Main Vertical piece
- 6' 4x4 Wooden lumber
- Cast Hardware
- 2pcs 3/4" flush pipe mounts
- 1pcs 3-way Tee
- 1pcs pipe to pipe swivel fitting
- 1pcs wood to pipe swivel fitting
- Guy Wires
- 15ft 3/16" wire rope
- 4pcs 3/16" wire rope clamps
- Nuts and Bolts
- 2pcs 4.5" x 1/2" coarse thread bolt
- 4pcs 1/2" washer
- 2pcs 1/2" nylock nut
- 4pcs 5" x 5/16" coarse thread bolt
- 8pcs 5/16" washer
- 4pcs 5/16" nylock nut
- Anchors
- 2pcs 1/2" or smaller x at least 24" rebar / steak of some kind
- 1 pcs screw in anchor
Preparation before field
- Drill a 5/16" hole on both sides of the 5 ft pipe
- Drill a 1/2" hole at one end of each piece of unistrut
- Assemble SR50A & mounting bracket
- Drill holes in 4x4 in proper place for the unitstrut stabilizers (a bit open ended here)
