Difference between revisions of "June 2008 Field Trip - Emily and Ken"

From IARC 207 Wiki
Jump to navigation Jump to search
Line 1: Line 1:
*All sites need HMP45C replacement and send back old for recalibration.
+
''All sites need HMP45C replacement and send back old for recalibration.''
  
*Ken add stations that need conduit and bear fencing.
+
''Ken add stations that need conduit and bear fencing.''
  
Sites are grouped by area.
+
 
 +
'''Note:''' Sites are grouped by area.
  
 
== Day 1 West of Dalton Highway ==
 
== Day 1 West of Dalton Highway ==

Revision as of 15:37, 6 June 2008

All sites need HMP45C replacement and send back old for recalibration.

Ken add stations that need conduit and bear fencing.


Note: Sites are grouped by area.

Day 1 West of Dalton Highway

1. DFM2 White Hills met Bear Damage:

  • Need anemometer cable,
  • solar panel,
  • soil profile (?),
  • electric fencing checked,
  • Measure distance from ground to snow sensor
  • No data in data files after May 30

2. DFM4 NW Kuparuk Met DFM4:

  • Measure distance from ground to snow sensor


Day 2 and 3 (Bullen Area)

3. DBM7 Kadleroshilik Met DBM7 Snow Sensor:

  • Needs SR50 replacement.
  • Measure distance from ground to snow sensor.

4. DFR3 repeater Troubleshoot:

  • Lost communications with site
  • Needs HMP45C

5. DBR4 repeater Troubleshoot:

  • Lost communications with site

6. DBM8 Bullen Met DBM8 (If Time)

  • Replace GWS YSIx3 Air temp sensor

Day 4 (Kavik Area)

7. DBM5 Upper Kad Met DBM5:

  • Check wiring of soil sensors, take photo.
  • Measure distance from ground to snow sensor.

8. DBM6 Kavik Met:

  • Check soil temperature,
  • Measure distance from ground to snow sensor,
  • reset antennae radio guy wires.


Day 5 (Mountain Sites)

9. DBM3 Juniper Met DBM3:

  • North fence needs another post,
  • solar panel wires are exposed, needs "plates" or other protection