Latest revision as of 12:36, 17 September 2008

TODO

Possible bear charging station (according to Sue at Kavik) but no visible damage.
Install bear fence next year
Sr50 distance to ground is 143 cm before trimming vegetation
Trimmed vegetation and added bark below sensor
New distance is ~140cm (data logger program read 148 cm) and so changed to 140 cm in program.

snow sensor distance is ~148 cm, changed old value of 150cm to new value of 148cm.

Transcribed EKY

Transcribed EKY

Tripod looks good
Precip good
Radiation pole, 1 guy detached
- reset radiation pole turn buckles and wired them to secure
Net rad is level, 111 cm to ground from sensor, but grass is 10 cm higher, birch (?) to 15 cm higher
SR50 is 148 cm to ground
Rotated SR50 pole to secure to guy wire via tie wrap

@@ Line 1: / Line 1: @@
-= TODO =
+== TODO ==
-   * Check soil temperature,
+*Check soil temperature,
-    * Measure distance from ground to snow sensor,
+*Measure distance from ground to snow sensor,
-    * reset antennae radio guy wires.
+*reset antennae radio guy wires.
 = site logs =
+== Sept 9 2008 1:20pm ADT Emily ==
+*Possible bear charging station (according to Sue at Kavik) but no visible damage.
+*Install bear fence next year
+*Sr50 distance to ground is 143 cm before trimming vegetation
+*Trimmed vegetation and added bark below sensor
+*New distance is ~140cm (data logger program read 148 cm) and so changed to 140 cm in program.
+== 13 Jun 2008 Emily & Ken ==
+* snow sensor distance is ~148 cm, changed old value of 150cm to new value of 148cm.
 == 03 Sept 2007, Ken I. ==