Difference between revisions of "NGEE September 3 2012 Trip"
		
		
		
		
		
		
		Jump to navigation
		Jump to search
		
				
		
		
		
		
		
		
		
	
| (9 intermediate revisions by 4 users not shown) | |||
| Line 3: | Line 3: | ||
* First Program (not including thermal offsets which will be added onsite):    | * First Program (not including thermal offsets which will be added onsite):    | ||
** https://github.com/frankohanlon/ngee/blob/master/ngee_intensive_site_subset.CR1  | ** https://github.com/frankohanlon/ngee/blob/master/ngee_intensive_site_subset.CR1  | ||
| − | + | * [[NGEE September 3 2012 Trip not essential to the trip information]]  | |
===Metadata type stuff===  | ===Metadata type stuff===  | ||
* [[NGEE-Barrow Calibration and Serial Numbers]]  | * [[NGEE-Barrow Calibration and Serial Numbers]]  | ||
| + | * Thermistor Probe Calibrations ([https://docs.google.com/open?id=0B0bJdr7FBoY-MG9FTjFCb2w2c28])  | ||
| + | * Thermistor Strings and Triple Calibrations ([https://docs.google.com/open?id=0B0bJdr7FBoY-WkVfMDdLX3Zjc2c])  | ||
* Timezone - UTC  | * Timezone - UTC  | ||
| − | * PakBus IDs - A = 400; B = 401; C = 402; D = 403  | + |  * PakBus IDs - A = 400; B = 401; C = 402; D = 403  | 
| − | ===  | + | ===Shipping===  | 
| − | *   | + | * Tripods, battery boxes etc.   | 
| − | *   | + | ** '''NAC Waybill 345-2130-8372'''  | 
| − | + | * Batteries  | |
| − | + | ** '''NAC Waybill 345-2130-8431'''  | |
| − | |||
| − | *   | ||
| − | *   | ||
| − | *   | ||
| − | |||
| − | *   | ||
| − | ===   | + | ===Bill Remaining things to grab===  | 
| − | *   | + | * 2 pcs Null Modem cables  | 
| − | **   | + | * Heat shrink  | 
| − | **   | + | * Heat Gun  | 
| − | **   | + | * lead weights  | 
| + | * 2 drill kits  | ||
| + | * 2 drills and batteries and chargers  | ||
| + | * small tarp for soil pits  | ||
| + | * frame pack  | ||
| − | **   | + | ===Bob Remaining things to grab===  | 
| − | **   | + | * 1 pcs SW12V Unit  | 
| − | **   | + | * 4 pcs nuts & bolts for solar panel mount  | 
| + | * Grabbed, not packed  | ||
| + | ** 5 pcs radio & power cable  | ||
| + | ** 5 pcs radio antenna setup  | ||
| + | ** 3 pcs null modem  | ||
| + | ** Ring connectors for batteries  | ||
| + | ** power cable to go between batteries  | ||
| + | ** power cable to go battery box to instrument box  | ||
| + | ** hole drilling stuff for liquid-tite  | ||
| + | ** Multiplexer wiring wire  | ||
| + | ** Metal Tags for labeling  | ||
| − | ===  | + | ===To Purchase===  | 
| − | *   | + | * Right size hole saw for the liquid-tite  (for a 1/2" fitting)  | 
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
===Pre-trip to do===  | ===Pre-trip to do===  | ||
| − | *   | + | * Organized per site items ('''X''' means it's packed / shipped)  | 
| − | + | ** Precip Stand    | |
| − | + | *** '''X''' 3 screed stakes  | |
| − | + | *** '''X''' Pipe: 2 pcs 5 ft; 1 pcs 2.5'  | |
| − | + | *** '''X''' Hose Clamps (2 sizes)  | |
| − | ** Precip Stand  | + | *** '''X''' NuRail fittings    | 
| − | *** 3 screed stakes  | ||
| − | *** Pipe: 2 pcs 5 ft; 1 pcs 2.5'  | ||
| − | *** Hose Clamps (2 sizes)  | ||
| − | *** NuRail fittings   | ||
** Tripod Related  | ** Tripod Related  | ||
| − | *** 1 pcs tripod  | + | *** '''X''' 1 pcs tripod & cross arm  | 
| − | *** 1 pcs instrument box & contents:  | + | *** '''X''' 1 pcs instrument box & contents:  | 
| − | **** cable ties  | + | **** '''X''' cable ties  | 
| − | **** AM16/32s  | + | **** '''X''' 2pcs AM16/32s  | 
| − | **** 2 pcs current excitation module  | + | **** '''X''' 2 pcs current excitation module  | 
| − | **** 1 pcs CR1000  | + | **** '''X''' 1 pcs CR1000  | 
**** 1 pcs radio & power cable  | **** 1 pcs radio & power cable  | ||
**** 1 pcs radio antenna setup  | **** 1 pcs radio antenna setup  | ||
**** 1 pcs null modem  | **** 1 pcs null modem  | ||
*** Energy system  | *** Energy system  | ||
| − | **** 1 pcs solar panel  | + | **** '''X''' 1 pcs solar panel ''missing one''  | 
| − | **** 2 pcs ubolts for solar panel mount  | + | **** '''X''' 2 pcs ubolts for solar panel mount  | 
| − | **** 2 pcs aluminum strips for solar panel mount  | + | **** '''X''' 2 pcs aluminum strips for solar panel mount ''shipped in 4' sections in one of the tripod boxes''  | 
| − | **** 4 pcs nuts & bolts for solar panel mount  | + | **** 4 pcs nuts & bolts for solar panel mount ''need to grab yet''  | 
| − | **** Batteries   | + | **** '''X''' Batteries  | 
| − | **** Ring connectors for batteries  | + | **** '''X''' Ring connectors for batteries  | 
**** power cable to go between batteries  | **** power cable to go between batteries  | ||
| − | **** power cable to go battery box to instrument box  | + | **** '''X''' power cable to go battery box to instrument box  | 
| − | **** cable protection between battery box and instrument box  | + | **** '''X''' cable protection between battery box and instrument box  | 
| − | **** power cable to go between solar panel and battery box  | + | **** '''X''' power cable to go between solar panel and battery box  | 
| − | **** cable protection to go between solar panel and battery box  | + | **** '''X''' cable protection to go between solar panel and battery box  | 
| − | **** cold temperature power cable (red & black or an all-weather extension cord)  | + | **** '''X''' cold temperature power cable (red & black or an all-weather extension cord)  | 
| − | **** 1 pcs power cable from solar panel  | + | **** '''X''' 1 pcs power cable from solar panel  | 
| − | **** 1 pcs cable protection for solar panel cable (sort of left off cable protection estimates I'm thinking)  | + | **** '''X''' 1 pcs cable protection for solar panel cable (sort of left off cable protection estimates I'm thinking)  | 
| − | **** 1 pcs charge controller  | + | **** '''X''' 1 pcs charge controller  | 
| − | *** 1 pcs SR50A setup  | + | *** '''X''' 1 pcs SR50A setup  | 
| − | |||
**** SR50A setup  | **** SR50A setup  | ||
| − | **** 1 pcs SR50A  | + | **** '''X''' 1 pcs SR50A  | 
| − | **** 1 pcs SR50A mount  | + | **** '''X''' 1 pcs SR50A mount (in tripod box)  | 
| − | **** 1 pcs SR50A cable  | + | **** '''X''' 1 pcs SR50A cable  | 
| − | **** 1 pcs SR50A cable protection  | + | **** '''X''' 1 pcs SR50A cable protection  | 
*** Air Temperature Setup  | *** Air Temperature Setup  | ||
| − | **** 1 pcs AT radiation shield  | + | **** '''X''' 1 pcs AT radiation shield  | 
| − | **** 1 pcs 107 Temperature Probe  | + | **** '''X''' 1 pcs 107 Temperature Probe  | 
| − | **** 1 pcs cable protection  | + | **** '''X''' 1 pcs cable protection  | 
*** Subsurface Hardware  | *** Subsurface Hardware  | ||
| − | **** 9 HydraProbe IIs  | + | **** '''X''' 9 HydraProbe IIs  | 
| − | **** 3 HFP01 heat flux plates  | + | **** '''X''' 3 HFP01 heat flux plates  | 
| − | **** 5 deep thermistor probes  | + | **** '''X''' 5 deep thermistor probes  | 
| − | **** 1 shallow thermistor probes  | + | **** '''X''' 1 shallow thermistor probes  | 
| − | **** 9 thermistors probes to pair with the hydraprobe iis  | + | **** '''X''' 9 thermistors probes to pair with the hydraprobe iis  | 
| − | **** 6 thermal conductivity probes to put two of the pits  | + | **** '''X''' 6 thermal conductivity probes to put two of the pits  | 
===Things to buy===  | ===Things to buy===  | ||
* Bit o' Food?  | * Bit o' Food?  | ||
* buy additional required hardware  | * buy additional required hardware  | ||
| − | |||
| − | |||
| − | |||
| − | |||
* wiring stuff (to control all the excess wires) Action Packers?  | * wiring stuff (to control all the excess wires) Action Packers?  | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | ===Stuff to bring   | + | ===Stuff to bring===  | 
| − | |||
| − | |||
| − | ====   | + | ==== things not on a PR yet====  | 
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
==== Technical Gear ====  | ==== Technical Gear ====  | ||
| Line 144: | Line 118: | ||
* Serial Cables & spares  | * Serial Cables & spares  | ||
* brown tarps  | * brown tarps  | ||
| − | * Sawzall  | + | * '''X''' Sawzall  | 
* drill  | * drill  | ||
| Line 159: | Line 133: | ||
* Bil & Vlad drill the thermistor bore holes  | * Bil & Vlad drill the thermistor bore holes  | ||
* Bob focuses on the wiring and station set up with an assist as needed from others  | * Bob focuses on the wiring and station set up with an assist as needed from others  | ||
| − | |||
* All will share hauling duties from truck to intensive site area  | * All will share hauling duties from truck to intensive site area  | ||
Latest revision as of 11:49, 1 September 2012
Contents
Notes
- NGEE Barrow Intensive Sites Initial Wiring
 - First Program (not including thermal offsets which will be added onsite):
 - NGEE September 3 2012 Trip not essential to the trip information
 
Metadata type stuff
- NGEE-Barrow Calibration and Serial Numbers
 - Thermistor Probe Calibrations ([1])
 - Thermistor Strings and Triple Calibrations ([2])
 - Timezone - UTC
 
* PakBus IDs - A = 400; B = 401; C = 402; D = 403
Shipping
- Tripods, battery boxes etc.
- NAC Waybill 345-2130-8372
 
 - Batteries
- NAC Waybill 345-2130-8431
 
 
Bill Remaining things to grab
- 2 pcs Null Modem cables
 - Heat shrink
 - Heat Gun
 - lead weights
 - 2 drill kits
 - 2 drills and batteries and chargers
 - small tarp for soil pits
 - frame pack
 
Bob Remaining things to grab
- 1 pcs SW12V Unit
 - 4 pcs nuts & bolts for solar panel mount
 - Grabbed, not packed
- 5 pcs radio & power cable
 - 5 pcs radio antenna setup
 - 3 pcs null modem
 - Ring connectors for batteries
 - power cable to go between batteries
 - power cable to go battery box to instrument box
 - hole drilling stuff for liquid-tite
 - Multiplexer wiring wire
 - Metal Tags for labeling
 
 
To Purchase
- Right size hole saw for the liquid-tite (for a 1/2" fitting)
 
Pre-trip to do
- Organized per site items (X means it's packed / shipped)
- Precip Stand
- X 3 screed stakes
 - X Pipe: 2 pcs 5 ft; 1 pcs 2.5'
 - X Hose Clamps (2 sizes)
 - X NuRail fittings
 
 - Tripod Related
- X 1 pcs tripod & cross arm
 - X 1 pcs instrument box & contents:
- X cable ties
 - X 2pcs AM16/32s
 - X 2 pcs current excitation module
 - X 1 pcs CR1000
 - 1 pcs radio & power cable
 - 1 pcs radio antenna setup
 - 1 pcs null modem
 
 - Energy system
- X 1 pcs solar panel missing one
 - X 2 pcs ubolts for solar panel mount
 - X 2 pcs aluminum strips for solar panel mount shipped in 4' sections in one of the tripod boxes
 - 4 pcs nuts & bolts for solar panel mount need to grab yet
 - X Batteries
 - X Ring connectors for batteries
 - power cable to go between batteries
 - X power cable to go battery box to instrument box
 - X cable protection between battery box and instrument box
 - X power cable to go between solar panel and battery box
 - X cable protection to go between solar panel and battery box
 - X cold temperature power cable (red & black or an all-weather extension cord)
 - X 1 pcs power cable from solar panel
 - X 1 pcs cable protection for solar panel cable (sort of left off cable protection estimates I'm thinking)
 - X 1 pcs charge controller
 
 - X 1 pcs SR50A setup
- SR50A setup
 - X 1 pcs SR50A
 - X 1 pcs SR50A mount (in tripod box)
 - X 1 pcs SR50A cable
 - X 1 pcs SR50A cable protection
 
 - Air Temperature Setup
- X 1 pcs AT radiation shield
 - X 1 pcs 107 Temperature Probe
 - X 1 pcs cable protection
 
 - Subsurface Hardware
- X 9 HydraProbe IIs
 - X 3 HFP01 heat flux plates
 - X 5 deep thermistor probes
 - X 1 shallow thermistor probes
 - X 9 thermistors probes to pair with the hydraprobe iis
 - X 6 thermal conductivity probes to put two of the pits
 
 
 
 - Precip Stand
 
Things to buy
- Bit o' Food?
 - buy additional required hardware
 - wiring stuff (to control all the excess wires) Action Packers?
 
Stuff to bring
things not on a PR yet
Technical Gear
- Shotgun
 - Keypad
 - fish tape
 - kayak
 - Tool Bags
 - Computer & (packed) SC32B
 - Climbing harness
 - Climbing Gear Proper
 - Serial Cables & spares
 - brown tarps
 - X Sawzall
 - drill
 
Food to bring out
- Optional
 
Probable Luggage
- Shotgun [Bob #1]
 - Bob Personal backpack [Bob #2]
 - Work Actionpacker #1 [Bob #3]
 
How it will go down out there
- Bil & Vlad drill the thermistor bore holes
 - Bob focuses on the wiring and station set up with an assist as needed from others
 - All will share hauling duties from truck to intensive site area