Difference between revisions of "NGEE Barrow 2013 Site Install Trip"

From IARC 207 Wiki
Jump to navigation Jump to search
 
(5 intermediate revisions by 4 users not shown)
Line 2: Line 2:
 
===Purpose: ===
 
===Purpose: ===
 
* Rewire Grid Site station with CR1000 & new multiplexers
 
* Rewire Grid Site station with CR1000 & new multiplexers
−
* Setup MD485s to get Grid online
+
** XX PakBus ID = 404
−
* reconfigure Site C CR1000 for act as a pakbus router
+
* XX Setup MD485s to get Grid online
 +
* XX reconfigure Site C CR1000 for act as a pakbus router
 +
** Change IsRouter to YES -> Available in advanced settings
 +
** Change beacon interval on SDC7 to 60
 
* Snow Surveys
 
* Snow Surveys
 
* Any other prep that's possible for the June trip
 
* Any other prep that's possible for the June trip
Line 10: Line 13:
 
* Record Thermal Conductivity Heater Resistance using a high-accuracy ohmmeter
 
* Record Thermal Conductivity Heater Resistance using a high-accuracy ohmmeter
 
* Swap out SR50A
 
* Swap out SR50A
 +
* ARM visit if time
  
 
===Shipping===
 
===Shipping===
Line 15: Line 19:
  
 
===To Purchase===
 
===To Purchase===
−
* Anti-Corrosion Goo
+
* XX Anti-Corrosion Goo
−
* Ziplocs
+
* XX Ziplocs
 
* In Barrow:
 
* In Barrow:
−
** Butane
+
** XX Butane -> Going to put someplace (naturally)
−
* Food?
+
** Battery Cleaner (haven't seen it)
 +
** XX Food
  
 
===Pre-trip to do===
 
===Pre-trip to do===
−
* Read up on CR1000 Pakbus Routing
+
* done.
−
* Pack
 
  
 
===Stuff to bring===
 
===Stuff to bring===
−
* Adirondack Tube
+
* XX Adirondack Tube
−
* Scale
+
* XX Scale
−
* Thaw Probe
+
* XX Thaw Probe
−
* Ziplocs
+
* XX Ziplocs
−
* GPS
+
* XX GPS
−
* 4 Precision Resistors for new logger
+
* XX 4 Precision Resistors for new logger
−
* High Precision Voltmeter
+
* XX High Precision Voltmeter
 +
* XX Duct Seal
 +
* XX 80' of cable
  
 
==== Technical Gear ====
 
==== Technical Gear ====
−
* '''Shotgun''' -- in Barrow already
+
* Shotgun -- in Barrow already
 
* Keypads
 
* Keypads
−
* '''fish tape'''
+
* XX fish tape
−
* Tool Bags  
+
* XX Tool Bags  
−
* Computer & (packed) SC32B  
+
* XX Computer & (packed) SC32B  
−
* Climbing harness
+
* XX Serial Cables & spares
−
* Serial Cables & spares
 
−
* Sawzall
 
−
* drill
 
  
 
==== Food to bring out ====
 
==== Food to bring out ====
Line 51: Line 54:
 
# Bob Personal Actionpacker [Bob #1]
 
# Bob Personal Actionpacker [Bob #1]
 
# Work Actionpacker #1 [Bob #2]
 
# Work Actionpacker #1 [Bob #2]
−
 
+
# daypack for working
  
 
===Rough on-site todo===
 
===Rough on-site todo===
Line 62: Line 65:
 
## http://www.campbellsci.com/forum/messages.cfm?threadid=6E4ABAA0-81A1-4158-B850230D8A56A2EF
 
## http://www.campbellsci.com/forum/messages.cfm?threadid=6E4ABAA0-81A1-4158-B850230D8A56A2EF
 
# armor and run rs485 line between C and grid
 
# armor and run rs485 line between C and grid
 +
 +
===Probable Schedule===
 +
* Tuesday
 +
** Safety Briefing
 +
** Get Trucks & Snowmachines
 +
** Eat Lunch
 +
** Visit Hut & Prepare for first field trip
 +
** Visit Site
 +
*** Download Data
 +
*** Start Rewiring
 +
*** Start measuring precision resistors
 +
*** Odds and ends
 +
*** Run MD485 Cable to site C
 +
*** Barrow Shopping Items
 +
 +
* Wednesday
 +
** 7am Up
 +
** 7:30 Breakfast & Make lunch
 +
** Visit Site
 +
*** Snow Surveys @ ABCD
 +
**** @ 2-4 Random Points within limits outlined below (start with 2 per site and see how long each takes)
 +
*** continue station rewiring
 +
*** Verify operation of MD485 Network
 +
 +
* Thursday
 +
** 7am Up
 +
** 7:30 Breakfast & Make lunch
 +
** Visit Site
 +
*** Finish Snow Surveys
 +
*** Finish Wiring
 +
*** Meet with Thomas
 +
** Pack up
 +
** Return to Fairbanks
 +
 +
===Re: Snow Surveys===
 +
''Larry,''<br>
 +
''Attached are the grid corner coordinates (DGPS) of the end-of-winter snow surveys I did in 2012 and that I repeated last week (all but site A). I used the MagnaProbe and have thousands of measurements from each grid. The measurements are aligned in ~S-N transects, which are located 4 m apart with a measurement every ~ft. These measurements overlap geophysics transects (John, Craig, Susan's).''<br>
 +
''Last year's average snow depth was about 51 cm, this year I think it was 39 at site B and C (site D 50 and 37 cm, respectively).
 +
I also took density measurements at each site.''<br>
 +
''I do not think it is realistic to ask anyone to repeat this snowdepth survey every day during the melt. In fact, it would be impossible time wise. Instead, perhaps do a daily survey (of a portion of) the outer lines of the grid, ie its western and southern perimeters, for example??  I  think it would be good to follow the "L" protocol of Rovansek. I also think we need a measurement every <0.5m in order to capture the spatial mosaic of snow accumulation in these landscapes.''<br>
 +
''I think it is critical to perform the ablation survey, including snow density, about the same time every day for each site (i.e. site A at 10am, Site B at 11am etc). ''
 +
<pre>Name Grid Easting (m) Grid Northing (m)
 +
SP_A1 585527.004 7910503.004
 +
SP_A2 585557.58 7910439.828
 +
SP_A3 585627.052 7910474.226
 +
SP_A4 585596.7 7910537.177
 +
SP_B1 585802.228 7910297.959
 +
SP_B2 585814.765 7910271.935
 +
SP_B3 585843.449 7910286.087
 +
SP_B4 585830.912 7910312.016
 +
SP_C1 585903.79 7910340.005
 +
SP_C2 585922.756 7910300.494
 +
SP_C3 585966.613 7910322.093
 +
SP_C4 585947.384 7910361.341
 +
SP_D1 585931.474 7910571.739
 +
SP_D2 585950.487 7910533.064
 +
SP_D3 585994.132 7910554.454
 +
SP_D4 585974.902 7910593.777
 +
</pre>

Latest revision as of 22:00, 8 May 2013

May 2013 Trip

Purpose:

  • Rewire Grid Site station with CR1000 & new multiplexers
    • XX PakBus ID = 404
  • XX Setup MD485s to get Grid online
  • XX reconfigure Site C CR1000 for act as a pakbus router
    • Change IsRouter to YES -> Available in advanced settings
    • Change beacon interval on SDC7 to 60
  • Snow Surveys
  • Any other prep that's possible for the June trip
  • Bring back shotgun
  • slather anticorrosion goo on all 12V/G points?
  • Record Thermal Conductivity Heater Resistance using a high-accuracy ohmmeter
  • Swap out SR50A
  • ARM visit if time

Shipping

  • None

To Purchase

  • XX Anti-Corrosion Goo
  • XX Ziplocs
  • In Barrow:
    • XX Butane -> Going to put someplace (naturally)
    • Battery Cleaner (haven't seen it)
    • XX Food

Pre-trip to do

  • done.

Stuff to bring

  • XX Adirondack Tube
  • XX Scale
  • XX Thaw Probe
  • XX Ziplocs
  • XX GPS
  • XX 4 Precision Resistors for new logger
  • XX High Precision Voltmeter
  • XX Duct Seal
  • XX 80' of cable

Technical Gear

  • Shotgun -- in Barrow already
  • Keypads
  • XX fish tape
  • XX Tool Bags
  • XX Computer & (packed) SC32B
  • XX Serial Cables & spares

Food to bring out

  • Optional

Probable Luggage

  1. Bob Personal Actionpacker [Bob #1]
  2. Work Actionpacker #1 [Bob #2]
  3. daypack for working

Rough on-site todo

  1. Copy wiring of Grid Site
  2. Transfer wires to new multiplexer & Logger
  3. Snowsurveys
  4. Measure Heater Resistances for all thermal conductivity probes
  5. Look to see if the C site pit 2 thermal conductivity sensors could be connected to a lower instrument enclosure.
  6. configure C as pakbus router for grid
    1. http://www.campbellsci.com/forum/messages.cfm?threadid=6E4ABAA0-81A1-4158-B850230D8A56A2EF
  7. armor and run rs485 line between C and grid

Probable Schedule

  • Tuesday
    • Safety Briefing
    • Get Trucks & Snowmachines
    • Eat Lunch
    • Visit Hut & Prepare for first field trip
    • Visit Site
      • Download Data
      • Start Rewiring
      • Start measuring precision resistors
      • Odds and ends
      • Run MD485 Cable to site C
      • Barrow Shopping Items
  • Wednesday
    • 7am Up
    • 7:30 Breakfast & Make lunch
    • Visit Site
      • Snow Surveys @ ABCD
        • @ 2-4 Random Points within limits outlined below (start with 2 per site and see how long each takes)
      • continue station rewiring
      • Verify operation of MD485 Network
  • Thursday
    • 7am Up
    • 7:30 Breakfast & Make lunch
    • Visit Site
      • Finish Snow Surveys
      • Finish Wiring
      • Meet with Thomas
    • Pack up
    • Return to Fairbanks

Re: Snow Surveys

Larry,
Attached are the grid corner coordinates (DGPS) of the end-of-winter snow surveys I did in 2012 and that I repeated last week (all but site A). I used the MagnaProbe and have thousands of measurements from each grid. The measurements are aligned in ~S-N transects, which are located 4 m apart with a measurement every ~ft. These measurements overlap geophysics transects (John, Craig, Susan's).
Last year's average snow depth was about 51 cm, this year I think it was 39 at site B and C (site D 50 and 37 cm, respectively). I also took density measurements at each site.
 I do not think it is realistic to ask anyone to repeat this snowdepth survey every day during the melt. In fact, it would be impossible time wise. Instead, perhaps do a daily survey (of a portion of) the outer lines of the grid, ie its western and southern perimeters, for example?? I think it would be good to follow the "L" protocol of Rovansek. I also think we need a measurement every <0.5m in order to capture the spatial mosaic of snow accumulation in these landscapes.
I think it is critical to perform the ablation survey, including snow density, about the same time every day for each site (i.e. site A at 10am, Site B at 11am etc). 

Name	Grid Easting (m)	Grid Northing (m)
SP_A1	585527.004	7910503.004
SP_A2	585557.58	7910439.828
SP_A3	585627.052	7910474.226
SP_A4	585596.7	7910537.177
SP_B1	585802.228	7910297.959
SP_B2	585814.765	7910271.935
SP_B3	585843.449	7910286.087
SP_B4	585830.912	7910312.016
SP_C1	585903.79	7910340.005
SP_C2	585922.756	7910300.494
SP_C3	585966.613	7910322.093
SP_C4	585947.384	7910361.341
SP_D1	585931.474	7910571.739
SP_D2	585950.487	7910533.064
SP_D3	585994.132	7910554.454
SP_D4	585974.902	7910593.777
Retrieved from "http://ocotal.iarc.uaf.edu/index.php?title=NGEE_Barrow_2013_Site_Install_Trip&oldid=1923"