Difference between revisions of "NGEE Backup Instrumentation"
Jump to navigation
Jump to search
| Line 24: | Line 24: | ||
* S/N K0810043 Factory Calibrated 2/17/2014 Installed at: 1.4m A Site | * S/N K0810043 Factory Calibrated 2/17/2014 Installed at: 1.4m A Site | ||
* S/N K0810046 Factory Calibrated 2/17/2014 Installed at: | * S/N K0810046 Factory Calibrated 2/17/2014 Installed at: | ||
| + | |||
| + | |||
| + | ==Fall 2014 Snow Sensor Deployment== | ||
| + | SDI 12 ID7 | ||
| + | * S/N 2012 | ||
| + | * S/N 3527 | ||
| + | * S/N 1439 | ||
| + | * S/N 2901 | ||
| + | SDI 12 ID 8 | ||
| + | * S/N 4516 | ||
| + | * S/N 3943 | ||
| + | * S/N 3969 | ||
| + | * S/N 3538 | ||
| + | SDI 12 ID 9 | ||
| + | * S/N 3544 | ||
Latest revision as of 16:44, 15 August 2014
In Fairbanks Stock
Net Radiometer CNR4 S/N 131352
- Purchased 8/2014 Factory Calibrated 1/1/2013
- SW Upper Sensor: 12.64 uV/W/m^2
- SW Lower Sensor: 12.69 uV/W/m^2
- LW Upper Sensor: 13.27 uV/W/m^2
- LW Lower Sensor: 14.65 uV/W/m^2
- Last Update: 8/15/2014
Air Temperature / Radiation Vaisala HMP155
- S/N J0320039
- Reason for removing from service: Periodic garbage data I think caused by corrosion in the electrical connector on the sensor head
- Last Update: 8/15/2014
- S/N J0330025
- Last Update: 8/15/2014
- Reason for removing from service: RH was lagging relative to the other site RHs. Upon visiting the site, the yellow cap had not been removed at installation so I think this sensor is just fine.
- S/N J0320033
- Last Update: 8/15/2014
- Reason for removing from service: Periodic garbage data I think caused by corrosion in the electrical connector on the sensor head
Deployed
- S/N K0810043 Factory Calibrated 2/17/2014 Installed at: 1.4m A Site
- S/N K0810046 Factory Calibrated 2/17/2014 Installed at:
Fall 2014 Snow Sensor Deployment
SDI 12 ID7
- S/N 2012
- S/N 3527
- S/N 1439
- S/N 2901
SDI 12 ID 8
- S/N 4516
- S/N 3943
- S/N 3969
- S/N 3538
SDI 12 ID 9
- S/N 3544
