Difference between revisions of "Super Site Tower"

From IARC 207 Wiki
Jump to navigation Jump to search
 
(15 intermediate revisions by 4 users not shown)
Line 1: Line 1:
===To Purchase in town etc===
+
===Vaisala HMP155===
* cable ties
+
* 10/23/2017: 1.5m HMP155 N4110491 Installed; Replaced 5/25/2019 grab S/N next visit
* split loom
+
* 10/23/2017: 3.0m HMP155 N4110490 Installed
* 3/8" wire rope, 17m * 4 pcs
+
* 10/23/2017: 4.5m HMP155 N4110492 Installed
* Lunch
+
* 10/23/2017: 6.0m HMP155 E4940013 Installed
 +
* 10/23//2017: 9.0m HMP155  F3930002 Installed
 +
* 10/23//2017: 11.0m HMP155 F4940011 Installed
 +
* 10/23//2017: 13.0m HMP155 F3930001 Installed
 +
* 10/23//2017: 16.0m HMP155 G4020001 Installed
 +
* 9/8/2018: Fores Floor HMP155 G4940001 Removed, P3520500 Installed
 +
(need to confirm locations and such)
  
===Extra to bring out Tuesday===
+
===MetOne 010C===
* cordless battery charger
+
* 9/12/2017: Installed new 1.5m MetOne 010C
* more exterior wood screws
+
* 9/12/2017: Installed new 3.0m MetOne 010C
* proper bit for the wood screws
+
* 10/13/2017: Installed re-calibrated MetOne 010C M7413
 +
* 10/13/2017: Installed re-calibrated MetOne 010C M7414
  
===Tools needed Thursday===
+
===Vaisala BP===
* '''Lunch'''
 
* wired Sawzall with long blade for cutting 8x8" lumber
 
* extra long sawzall blade
 
* tool belt, small
 
* 9/16" Wrench & nut driver / socket
 
* gorilla cart
 
* cordless drill for hangers
 
* 2 pcs uni-strut
 
* 8 pcs uni-strut clamps
 
* Wood Screws & washers to secure unistrut to trailer
 
* tie downs to secure pipe to trailer
 
  
===Plan for 1st week of October===
 
* with the it in place and fully clamped, remove the original helper.
 
* put in a secondary 10' support on the NW leg
 
* move the fourth pipe to the NE corner
 
* clamp up the NE corner leg support.
 
* with the legs fully clamped, start on the guy wires. 
 
  
 +
===CR1000s===
  
====Bolting hardware====
+
===Tipping Buckets===
* Medium-Strength Grade 5 Zinc-Plated Steel Cap Screw, 3/8"-16 Thread, 4" Long
 
* Type 316 Stainless Steel Nylon-Insert Locknut, 3/8"-16 Thread Size
 
* Zinc Yellow-Chromate Plated Steel Flat Washer, Grade 9, 3/8" Screw Size
 
  
===Extra Notes===
+
===CNR4 Radiometers===
* the cyberpower below the SS Toughbook may be at capacity. Or who knows. There was a power surge that tripped it, which brought the network down when the deal didn't come back up.
+
* Tower Top
* something to keep an eye on. It coincided perhaps with an 8/21 visit.
+
** S/N 181770
* it is a recurring brown out but I'm not sure yet if it is hitting everything or just that UPS.
+
** Deployed 2019-05-23
* probably need an extension to reconnect the HMP power.
+
** SW Upper 13.87
 +
** SW Lower 14.39
 +
** LW Upper 13.02
 +
** LW Lower 11.12
 +
* Forest Floor
 +
** S/N 090013
 +
** Desiccant Changed 5/2019
 +
** SW Upper 15.48
 +
** SW Lower 10.74
 +
** LW Upper 9.07
 +
** LW Lower 8.08
  
[[Super Site Activity Log]]
+
===Forest Floor Eddy Covariance System===
 +
* LI-COR LI7550: S/N 2047 (replaced 5/2019)
 +
* Li-Cor LI-7200RS: S/N 72H-0105
 +
** Recalibrated winter 20/21
 +
* SmartFlux2: S/N 00350
 +
* WindMaster Pro S/N 180113 (purchased in 2018) 2329-701
 +
 
 +
===Above Canopy Eddy Covariance System===
 +
* Li-Cor LI-7550: S/N AIU-0155
 +
* Li-Cor LI-7200RS: S/N 72H-0109 (Installed 2021-Oct+)
 +
* Li-Cor LI-7200RS: S/N 72H-0989 (2021)
 +
* Li-Cor SmartFlux: S/N 0247
 +
* WindMaster Pro S/N 100604 (purchased in 2010) 2329-114
 +
 
 +
===WindMaster Pro===
 +
* Forest Floor: WindMaster Pro S/N 180113 (purchased in 2018) 2329-701
 +
* Tower: WindMaster Pro S/N 100603 (Recalibrated & new firmware in 7/2018: 2329-113)
 +
* Storage: Send for calibration: WindMaster Pro S/N 100604
 +
 
 +
===2020 Recalibrations===
 +
====HMP155====
 +
* G4020001
 +
** Yellow Sticker
 +
** 3/2020 Recalibrate
 +
* E4940013
 +
** Yellow Sticker
 +
* 3/2020 Recalibrate
 +
* E4940012
 +
** Yellow Sticker
 +
** 3/2020 Recalibrate
 +
* G4020002
 +
** Yellow Sticker
 +
** 5/2020 Removed from SS Recalibrate
 +
* N4110492
 +
** Yellow sticker
 +
** 5/2020 Removed from SS Recalibrate
 +
* J0320039
 +
** Yellow Sticker on box
 +
** 3/2020 Removed from SS Recalibrate
 +
* N4110490
 +
** Yellow sticker on box
 +
** 5/2020 Recal Sticker
 +
* J0330031
 +
** 7/2020 Removed from SS @ 9 meters... Need to replace RH chip
 +
** Red Sticker on box
 +
* J0330015
 +
** Red Sticker on Box
 +
** 7/2020 Removed from SS @ 3meters... Need to replace RH Chip
 +
* J0320033
 +
** Red sticker on box
 +
** 7/2020 Removed from SS @ 1.5m ... Might be another 100% broken RH Need to review data.

Latest revision as of 08:53, 30 June 2022

Vaisala HMP155

  • 10/23/2017: 1.5m HMP155 N4110491 Installed; Replaced 5/25/2019 grab S/N next visit
  • 10/23/2017: 3.0m HMP155 N4110490 Installed
  • 10/23/2017: 4.5m HMP155 N4110492 Installed
  • 10/23/2017: 6.0m HMP155 E4940013 Installed
  • 10/23//2017: 9.0m HMP155 F3930002 Installed
  • 10/23//2017: 11.0m HMP155 F4940011 Installed
  • 10/23//2017: 13.0m HMP155 F3930001 Installed
  • 10/23//2017: 16.0m HMP155 G4020001 Installed
  • 9/8/2018: Fores Floor HMP155 G4940001 Removed, P3520500 Installed

(need to confirm locations and such)

MetOne 010C

  • 9/12/2017: Installed new 1.5m MetOne 010C
  • 9/12/2017: Installed new 3.0m MetOne 010C
  • 10/13/2017: Installed re-calibrated MetOne 010C M7413
  • 10/13/2017: Installed re-calibrated MetOne 010C M7414

Vaisala BP

CR1000s

Tipping Buckets

CNR4 Radiometers

  • Tower Top
    • S/N 181770
    • Deployed 2019-05-23
    • SW Upper 13.87
    • SW Lower 14.39
    • LW Upper 13.02
    • LW Lower 11.12
  • Forest Floor
    • S/N 090013
    • Desiccant Changed 5/2019
    • SW Upper 15.48
    • SW Lower 10.74
    • LW Upper 9.07
    • LW Lower 8.08

Forest Floor Eddy Covariance System

  • LI-COR LI7550: S/N 2047 (replaced 5/2019)
  • Li-Cor LI-7200RS: S/N 72H-0105
    • Recalibrated winter 20/21
  • SmartFlux2: S/N 00350
  • WindMaster Pro S/N 180113 (purchased in 2018) 2329-701

Above Canopy Eddy Covariance System

  • Li-Cor LI-7550: S/N AIU-0155
  • Li-Cor LI-7200RS: S/N 72H-0109 (Installed 2021-Oct+)
  • Li-Cor LI-7200RS: S/N 72H-0989 (2021)
  • Li-Cor SmartFlux: S/N 0247
  • WindMaster Pro S/N 100604 (purchased in 2010) 2329-114

WindMaster Pro

  • Forest Floor: WindMaster Pro S/N 180113 (purchased in 2018) 2329-701
  • Tower: WindMaster Pro S/N 100603 (Recalibrated & new firmware in 7/2018: 2329-113)
  • Storage: Send for calibration: WindMaster Pro S/N 100604

2020 Recalibrations

HMP155

  • G4020001
    • Yellow Sticker
    • 3/2020 Recalibrate
  • E4940013
    • Yellow Sticker
  • 3/2020 Recalibrate
  • E4940012
    • Yellow Sticker
    • 3/2020 Recalibrate
  • G4020002
    • Yellow Sticker
    • 5/2020 Removed from SS Recalibrate
  • N4110492
    • Yellow sticker
    • 5/2020 Removed from SS Recalibrate
  • J0320039
    • Yellow Sticker on box
    • 3/2020 Removed from SS Recalibrate
  • N4110490
    • Yellow sticker on box
    • 5/2020 Recal Sticker
  • J0330031
    • 7/2020 Removed from SS @ 9 meters... Need to replace RH chip
    • Red Sticker on box
  • J0330015
    • Red Sticker on Box
    • 7/2020 Removed from SS @ 3meters... Need to replace RH Chip
  • J0320033
    • Red sticker on box
    • 7/2020 Removed from SS @ 1.5m ... Might be another 100% broken RH Need to review data.