Difference between revisions of "Teller Lower Station"

From IARC 207 Wiki
Jump to navigation Jump to search
 
(10 intermediate revisions by 6 users not shown)
Line 1: Line 1:
Tape Color is '''BLUE'''
 
  
===To Bring:===
+
Station known as Teller Bottom
* Put the 3m tripod built from tripod kit here. (The heaviest steel tripod, blue tape on it)
+
* http://ocotal.iarc.uaf.edu/index.php?title=NGEE_Teller_Bottom_Notes
* vertical mast will be 10 foot 1.5" schedule 40 pipe with 1.5 to 1" coupler on top.
+
===Left to fix===
* primary instrument box will be mounted at about 1 meter above the ground surface
+
* need to send program one last time to fix out of range error for 5cmbgs soil moisture sensor.
* secondary instrument box will be mounted below it.
+
* Emily saw the Barrow Sampling frequency was 30 seconds. You have 60 seconds for Teller
* solar panel will be mounted above primary instrument box and face south.
 
* cross arm
 
* Battery box in basement needs holes cut for 1/2" liquid-tite (ship battery box filled with instruments
 
* Instrument box with 1 CR1000 and AM416 is on site in the shrubs with
 
* Bring a second instrument box with 1 AM16/32 for met instruments.
 
  
===Outstanding Tripod items===
+
===Sensor Heights===
* Cross arm support brackets and such
+
====Meteorological====
* mount am16/32 to second instrument box
+
* Air Temperature / Relative Humidity / Dew Point Temperature
* send instruments & battery box on second freight run
+
** Vaisala HMP155
* Stabilizer for net radiometer support arm.
+
** 1.85 meters above ground surface
** used cross arm brackets last time... need to dig them out and make sure we have enough.
+
* Windspeed  / Wind Direction
** also could use ubolts and unistrut.
+
** RM Young 05103 Alpine
 +
** 3.74 meters above ground surface
 +
* Summer Precipitation
 +
** Texas Electronics TE-525M
 +
** No altar shield
 +
** Mounted at 0.88 meters
 +
* Barometric Pressure
 +
** Vaisala ____
 +
====Snow====
 +
* Snow Depth at station
 +
** Mounted over blueberry patch
 +
** 2.02 meters
 +
* Snow Depth away from station
 +
** Mounted over 1.5 meter soil temperature profile
 +
* Snow Temperature Profile
 +
** Thermistors every 4cm 0 to 88 cm above ground service (I need to confirm this)
 +
** located in an area that will be drifted in due to presence of willows.
 +
** Need to confirm the model number
  
====Cross Arms====
+
====Radiation====
* Net Radiometer skin temperature
+
* Interval camera
** need to track down unistrut & strut clamps for stabilization (or ubolts)
+
** Looking generally to the north, 2-4 photos per day
* small cross arm for air temperature
+
* Skin Surface Temperature
* RM Young should mount to top without issue.
+
** Apogee SI-111
* Precip stand is already out there
+
** 1.50 meters above ground
* Need to figure out where NDVI sensors point. & do we have all supplies for that...
+
* 4 component Net Radiation
 +
** Kipp & Zonen CNR4, No fan or heater active
 +
** Shortwave Up/Down
 +
** Longwave Up/Down
 +
** 1.76 meters above ground surface
 +
* NDVI & PRI Up
 +
** Decagon SRS NDVI, SRS PRI
 +
** 1.60 meters above ground surface
 +
* NDVI & PRI #1
 +
** Decagon SRS NDVI, SRS PRI
 +
** 1.60 meters above ground surface
 +
** pointed at area below CNR4
 +
* NDVI & PRI #2
 +
** Decagon SRS NDVI, SRS PRI
 +
** 1.60 meters above ground surface
 +
** pointed at willows
 +
====Subsurface====
 +
* Soil Temperature Profile
 +
** Sensor positions are same as for the Barrow sites, 0 to 1.50 meters below ground surface
 +
** Need to confirm the model number
 +
* Soil Pit
 +
** Thermal Conductivity
 +
*** East30 sensors
 +
*** 10, 20, 30, 40 cm below ground surface
 +
** Soil Temperature
 +
*** East30 sensors
 +
*** 10, 20, 30, 40 cm below ground surface
 +
** Soil Moisture
 +
*** Stevens HydraProbe II
 +
*** 5, 10, 20, 30, 40 cm below ground surface
 +
** Soil Heat Flux
 +
** Hukseflux HFP01
 +
** 5 & 50 cm below ground surface
 +
====Surface Water====
 +
* Station 8/2016 to present @ Northing: 7178304.038, Easting: 454885.819, Elevation: 70.702
 +
* Station 4/2016 to 82016 @ Northing: 7178297.340, Easting: 454864.331, Elevation: 75.558
 +
** PTs in same location 4/2016 to present.
 +
*** First Reading: 4/10/2016 22:20
 +
** 9/2016 one PT removed for winter.
 +
* Stage
 +
** Two INWUSA PT12 (5psi gauge pressure pressure transducers)
 +
* Rebar 1 @ Northing: 7178307.9 Easting: 454898.0 Elevation: 69.931
 +
* Rebar 2 @ Northing: 7178307.933 Easting: 454897.936 Elevation: 70.003
 +
* PT @ (I believe point xsec-pt1: Northing 7178307.626 Easting: 454897.894 Elevation: 69.804
  
 +
====Coordinates submitted to Lauren @ LANL====
 +
Preliminary Coordinates
 +
<pre>
 +
TL-Bottom-bridge# is the outline of the bridge.
 +
TL-Bottom-netrad = Permanent Net Radiation sensor location 8/2016 forward
 +
TL-Bottom-precip = Permanent Precipitation sensor location 8/2016 forward
 +
TL-Bottom-snopro = Permanent snow temperature profile location 8/2016 forward
 +
TL-Bottom-MM-Stn = Permanent Micromet Tripod  location 8/2016 forward
 +
TL-Bottom-SW-Stn = Permanent Surface Water Data logger  location 8/2016 forward
 +
TL-Bottom-SnowDepth1 =  Snow depth at MM Tripod (estimated with ArcGIS) location 8/2016 forward
 +
TL-Bottom-SnowDepth2 = Snow depth at VATP location 8/2016 forward
 +
TL-Bottom-VATP = 1.5m soil temperature profile location 8/2016 forward
 +
TL-SnowMelt-atrh = Snow melt period Micromet air temperature / relative humidity sensor 4/2016 to 8/2016 (now moved)
 +
TL-SnowMelt-netrad = Snow melt period Micromet net radiation sensor 4/2016 to 8/2016 (now moved)
 +
TL-SnowMelt-precip = Snow melt period Micromet Precipitation sensor 4/2016 to 8/2016 (now moved)
 +
TL-SnowMelt-snopro = Snow melt period snow temperature profile sensor 4/2016 to 8/2016 (now moved)
 +
TL-SW-PT_Rebar-1-3 = the rebars we used to reference for stage reading
 +
TL-SW-pt-xsec-# = Roughly, the cross section at the pressure transducers (1 = the pressure transducer location)
 +
TL-SW-disch-xsec-# = Roughly, the measurement cross section I have been using for discharge measurements
  
===Sensors===
+
At the top, I didn't have on hand the coordinates from John Peterson so we surveyed in some of the existing infrastructure around TL_IS5
====To Bring:====
+
TL_IS5_NE = intensive area corner
* 015103 WS/WD
+
TL_IS5_NW = intensive area corner
** Make up cable for it
+
TL_IS5_SE = intensive area corner
* CR200 for measuring Pressure Transducers
+
TL_IS5_SW = intensive area corner
* ''5 pcs'' VITEL Hydraprobe II
+
TL_IS5_seisFlag1 = LBNL seismic marker flag
** ID 0 = 5cm = red
+
TL_IS5_seisFlag2 = LBNL seismic marker flag
** ID 1 = 10cm = orange
+
TL_IS5_seisFlag3 = LBNL seismic marker flag
** ID 2 = 20cm = purple
+
TL_IS5_TEONbox = Romanovsky Soil moisture/temperature profile instrument box
** ID 3 = 30cm = brown
 
** ID 4 = 40cm = black
 
* ''4 pcs'' East30 sensors thermal conductivity or specific heat
 
** also interface board
 
** also measure the heater resistance of each
 
* Cable protection
 
* cable ties & hose clamps for securing cabling to tripod
 
* VATP 1504 - see email for thermistor calibration offsets
 
  
====Sensor Heights====
+
TL-Top-netrad = Permanent Net Radiation sensor location 8/2016 forward
* Anemometer @ top of tripod  / ~3 meters
+
TL-Top-precip = Permanent Precipitation sensor location 8/2016 forward
* HMP155 @ 1.5m above ground surface
+
TL-Top-snowpro = Permanent snow temperature profile location 8/2016 forward
* Barometric Pressure - in instrument box
+
TL-Top-SnowDepth1 = snow depth at MM Tripod 8/2016 forward
* Net Radiation -  
+
TL-Top-SnowDepth2 = snow depth away from tripod on top of a hummock deal 8/2016 forward
* Snow Temperature profile -- ground surface in the shrubs
+
TL-Top-VATP = soil temperature 1 meter profile location 8/2016 forward
* Snow Depth 1 -- 2m on cross arm off station
+
TL-Top-Tripd-WestLeg = Used a bigger tripod than for the bottom site so we surveyed in the legs
* Snow Depth 2 -- in shrubs on a stand.
+
TL-Top-Tripd-EastLeg = Used a bigger tripod than for the bottom site so we surveyed in the legs
 +
TL-Top-Tripd-NorthLeg = Used a bigger tripod than for the bottom site so we surveyed in the legs
 +
</pre>
  
 +
As a CSV file these can be viewed directly in ArcGIS... It looks like I have a bit more work to do here...
 +
<pre>
 +
Point ID,Northing,Easting,Elevation,Geoid Height,Latitude (Local),Longitude (Local),Attributes,X (ECEF),Y (ECEF),Z (ECEF)
 +
new-netrad,7178296.860,454835.642,81.960,,64.72636,-165.94809,,-2648901.993,-662995.035,5744824.810
 +
old-netrad,7178294.609,454862.839,80.916,,64.72635,-165.94752,,-2648896.565,-663021.755,5744823.078
 +
new-precip,7178301.724,454843.494,81.919,,64.72641,-165.94793,,-2648895.716,-663001.485,5744826.900
 +
old-precip,7178300.739,454855.192,81.383,,64.72640,-165.94768,,-2648893.360,-663012.973,5744826.069
 +
new-snopro,7178296.643,454830.391,82.148,,64.72636,-165.94820,,-2648903.605,-662990.027,5744824.853
 +
old-snopro,7178295.372,454827.643,82.058,,64.72635,-165.94826,,-2648905.381,-662987.657,5744824.212
 +
new-station,7178298.590,454835.192,82.140,,64.72638,-165.94810,,-2648900.671,-662994.213,5744825.709
 +
new-sw-stn,7178304.038,454885.819,75.960,,64.72644,-165.94704,,-2648880.391,-663041.256,5744822.770
 +
old-atrh,7178297.340,454864.331,80.816,,64.72637,-165.94749,,-2648893.755,-663022.547,5744824.164
 +
sr50a2,7178307.196,454840.181,82.300,,64.72646,-165.94800,,-2648891.941,-662997.040,5744829.560
 +
teller2 0,7178948.902,454819.322,127.711,,64.73221,-165.94864,,-2648355.330,-662831.320,5745144.509
 +
telsnw2,7178258.459,455055.399,83.085,,64.72605,-165.94347,,-2648879.756,-663216.660,5744810.828
 +
xsec-pt1,7178307.626,454897.894,75.062,,64.72647,-165.94679,,-2648873.792,-663052.000,5744823.567
 +
xsec-pt2,7178307.730,454898.200,75.067,,64.72647,-165.94678,,-2648873.625,-663052.272,5744823.618
 +
xsec-pt3,7178307.635,454898.423,75.062,,64.72647,-165.94678,,-2648873.649,-663052.509,5744823.574
 +
xsec-pt4,7178307.587,454898.545,75.063,,64.72647,-165.94677,,-2648873.660,-663052.639,5744823.555
 +
xsec-pt5,7178307.582,454898.762,75.092,,64.72647,-165.94677,,-2648873.621,-663052.852,5744823.581
 +
xsec-pt6,7178307.486,454898.875,75.192,,64.72647,-165.94677,,-2648873.717,-663052.995,5744823.631
 +
xsec-pt7,7178307.441,454899.028,75.251,,64.72647,-165.94676,,-2648873.741,-663053.160,5744823.666
 +
xsec-pt8,7178307.462,454899.287,75.421,,64.72647,-165.94676,,-2648873.727,-663053.422,5744823.831
 +
xsec-pt9,7178307.770,454897.717,75.578,,64.72647,-165.94679,,-2648873.925,-663051.848,5744824.094
 +
bridge1,7178305.827,454897.430,75.958,,64.72645,-165.94680,,-2648875.854,-663052.065,5744823.606
 +
bridge2,7178305.408,454897.409,76.006,,64.72645,-165.94680,,-2648876.245,-663052.148,5744823.471
 +
bridge3,7178306.011,454900.453,75.879,,64.72645,-165.94673,,-2648874.887,-663054.937,5744823.633
 +
bridge4,7178305.505,454900.524,75.855,,64.72645,-165.94673,,-2648875.301,-663055.122,5744823.395
 +
bxsec-disch1,7178305.994,454899.426,75.351,,64.72645,-165.94676,,-2648874.946,-663053.894,5744823.142
 +
bxsec-disch2,7178305.952,454899.280,75.267,,64.72645,-165.94676,,-2648874.985,-663053.753,5744823.047
 +
bxsec-disch3,7178305.956,454899.144,75.234,,64.72645,-165.94676,,-2648875.003,-663053.617,5744823.017
 +
bxsec-disch4,7178306.012,454899.012,75.200,,64.72645,-165.94676,,-2648874.973,-663053.473,5744823.010
 +
bxsec-disch5,7178305.980,454898.655,75.202,,64.72645,-165.94677,,-2648875.094,-663053.136,5744822.996
 +
bxsec-disch6,7178305.929,454898.410,75.195,,64.72645,-165.94678,,-2648875.198,-663052.910,5744822.966
 +
bxsec-disch7,7178305.957,454898.211,75.147,,64.72645,-165.94678,,-2648875.204,-663052.706,5744822.934
 +
bxsec-disch8,7178305.929,454898.062,75.124,,64.72645,-165.94678,,-2648875.258,-663052.566,5744822.900
 +
bxsec-disch9,7178305.899,454897.882,75.125,,64.72645,-165.94679,,-2648875.330,-663052.399,5744822.886
 +
ptrb-1,7178307.895,454898.036,75.189,,64.72647,-165.94679,,-2648873.574,-663052.088,5744823.798
 +
ptrb-2,7178307.933,454897.936,75.262,,64.72647,-165.94679,,-2648873.596,-663051.989,5744823.879
 +
ptrb-3,7178308.449,454897.478,75.907,,64.72648,-165.94680,,-2648873.530,-663051.493,5744824.681
  
Already at site:
+
</pre>
* HMP155
 
** thinking about bringing out a replacement temperature head though because the one in place has been on the fritz over the summer.
 
* TE525MM
 
* CNR4 w/bracket
 
* Two Batteries
 
* Solar Panel
 
* Charge Controller
 
 
 
 
 
 
 
 
 
===Extras===
 
* need to yet sort out how Met AM16/32 will attach
 
* need to drill out second instrument box so that cables can enter.
 
* Need to permanentify the solar panel
 
** bring solar panel from Fairbanks and but need to make a mount for it yet.
 
* Measure East30 sensor resistance
 
* label all subsurface sensors
 
* Need to survey in all instruments with GPS
 
* Reuse batteries that are already out here, no new batteries needed.
 
* think about how to mount iridium here...
 
 
 
To Ship:
 
* Tripod
 
*
 
 
 
 
 
===Installation Guidance:===
 
* Unpack Tripod Base
 
** Set in approximate position
 
* Loosen bolts at base so that legs can fold out and also so that the mast can slip into the bottom bracket
 
* The mast is 1.5" schedule 40 pipe.  Screw a 1.5" to 1" coupler on top and follow with a 1' long schedule 40 pipe. 
 
* on the other end, slip the 1.5" nurail cross fitting over it and slide it up
 
* Mount the anemometer to the top
 
* with the tripod tipped, orient the tower so that one leg points north
 
* rotate the tripod to vertical
 
* mount the secondary instrument box on the opposite side of the pipe from the primary box.
 
** need the 5.3cm ubolts 2pcs
 
* mount the primary instrument box above it on the tower
 
** use the 1.5" unistrut clamps
 
* mount the solar panel on the instrument tower
 
* mount the HMP155 radiation shield at 1.5m above the ground surface
 
 
 
=====Primary Instrument Box====
 
* use 1.5" unistrut clamps to secure to center mast.
 
* clamps are in AM16/32B box
 
====Secondary Instrument Box====
 
* Use U bolts to secure to center mast
 
* U bolts are in AM16/32B Box
 
** 1/2" wrenches required
 
====Solar Panel====
 
* Use 2 pcs of 15" slim unistrut
 
* 4 1/4-20 x 1" long bolts to secure unistrut to solar panel
 
** also 4 nuts & washers
 
** 7/16" wrenches required
 
* use 1.5" unistrut clamps to secure to center mast
 
 
 
 
 
 
 
===Additional Electrical supplies===
 
* 2 pcs butt splices for solar panel to charge controller cable
 
*
 
 
 
* Move SW12V for HMP155 from main instrument box to secondary instrument box.
 
** SW12V RES to AM16/32B #2 RES
 
** SW12V 12V to AM16/32B #2 12V
 
** SW12V G to AM16/32B #2 G
 

Latest revision as of 11:28, 4 May 2022

Station known as Teller Bottom

Left to fix

  • need to send program one last time to fix out of range error for 5cmbgs soil moisture sensor.
  • Emily saw the Barrow Sampling frequency was 30 seconds. You have 60 seconds for Teller

Sensor Heights

Meteorological

  • Air Temperature / Relative Humidity / Dew Point Temperature
    • Vaisala HMP155
    • 1.85 meters above ground surface
  • Windspeed / Wind Direction
    • RM Young 05103 Alpine
    • 3.74 meters above ground surface
  • Summer Precipitation
    • Texas Electronics TE-525M
    • No altar shield
    • Mounted at 0.88 meters
  • Barometric Pressure
    • Vaisala ____

Snow

  • Snow Depth at station
    • Mounted over blueberry patch
    • 2.02 meters
  • Snow Depth away from station
    • Mounted over 1.5 meter soil temperature profile
  • Snow Temperature Profile
    • Thermistors every 4cm 0 to 88 cm above ground service (I need to confirm this)
    • located in an area that will be drifted in due to presence of willows.
    • Need to confirm the model number

Radiation

  • Interval camera
    • Looking generally to the north, 2-4 photos per day
  • Skin Surface Temperature
    • Apogee SI-111
    • 1.50 meters above ground
  • 4 component Net Radiation
    • Kipp & Zonen CNR4, No fan or heater active
    • Shortwave Up/Down
    • Longwave Up/Down
    • 1.76 meters above ground surface
  • NDVI & PRI Up
    • Decagon SRS NDVI, SRS PRI
    • 1.60 meters above ground surface
  • NDVI & PRI #1
    • Decagon SRS NDVI, SRS PRI
    • 1.60 meters above ground surface
    • pointed at area below CNR4
  • NDVI & PRI #2
    • Decagon SRS NDVI, SRS PRI
    • 1.60 meters above ground surface
    • pointed at willows

Subsurface

  • Soil Temperature Profile
    • Sensor positions are same as for the Barrow sites, 0 to 1.50 meters below ground surface
    • Need to confirm the model number
  • Soil Pit
    • Thermal Conductivity
      • East30 sensors
      • 10, 20, 30, 40 cm below ground surface
    • Soil Temperature
      • East30 sensors
      • 10, 20, 30, 40 cm below ground surface
    • Soil Moisture
      • Stevens HydraProbe II
      • 5, 10, 20, 30, 40 cm below ground surface
    • Soil Heat Flux
    • Hukseflux HFP01
    • 5 & 50 cm below ground surface

Surface Water

  • Station 8/2016 to present @ Northing: 7178304.038, Easting: 454885.819, Elevation: 70.702
  • Station 4/2016 to 82016 @ Northing: 7178297.340, Easting: 454864.331, Elevation: 75.558
    • PTs in same location 4/2016 to present.
      • First Reading: 4/10/2016 22:20
    • 9/2016 one PT removed for winter.
  • Stage
    • Two INWUSA PT12 (5psi gauge pressure pressure transducers)
  • Rebar 1 @ Northing: 7178307.9 Easting: 454898.0 Elevation: 69.931
  • Rebar 2 @ Northing: 7178307.933 Easting: 454897.936 Elevation: 70.003
  • PT @ (I believe point xsec-pt1: Northing 7178307.626 Easting: 454897.894 Elevation: 69.804

Coordinates submitted to Lauren @ LANL

Preliminary Coordinates

TL-Bottom-bridge# is the outline of the bridge.
TL-Bottom-netrad = Permanent Net Radiation sensor location 8/2016 forward
TL-Bottom-precip = Permanent Precipitation sensor location 8/2016 forward
TL-Bottom-snopro = Permanent snow temperature profile location 8/2016 forward
TL-Bottom-MM-Stn = Permanent Micromet Tripod  location 8/2016 forward
TL-Bottom-SW-Stn = Permanent Surface Water Data logger  location 8/2016 forward
TL-Bottom-SnowDepth1 =  Snow depth at MM Tripod (estimated with ArcGIS) location 8/2016 forward
TL-Bottom-SnowDepth2 = Snow depth at VATP location 8/2016 forward
TL-Bottom-VATP = 1.5m soil temperature profile location 8/2016 forward
TL-SnowMelt-atrh = Snow melt period Micromet air temperature / relative humidity sensor 4/2016 to 8/2016 (now moved)
TL-SnowMelt-netrad = Snow melt period Micromet net radiation sensor 4/2016 to 8/2016 (now moved)
TL-SnowMelt-precip = Snow melt period Micromet Precipitation sensor 4/2016 to 8/2016 (now moved)
TL-SnowMelt-snopro = Snow melt period snow temperature profile sensor 4/2016 to 8/2016 (now moved)
TL-SW-PT_Rebar-1-3 = the rebars we used to reference for stage reading 
TL-SW-pt-xsec-# = Roughly, the cross section at the pressure transducers (1 = the pressure transducer location)
TL-SW-disch-xsec-# = Roughly, the measurement cross section I have been using for discharge measurements

At the top, I didn't have on hand the coordinates from John Peterson so we surveyed in some of the existing infrastructure around TL_IS5
TL_IS5_NE = intensive area corner
TL_IS5_NW = intensive area corner
TL_IS5_SE = intensive area corner
TL_IS5_SW = intensive area corner
TL_IS5_seisFlag1 = LBNL seismic marker flag
TL_IS5_seisFlag2 = LBNL seismic marker flag
TL_IS5_seisFlag3 = LBNL seismic marker flag
TL_IS5_TEONbox = Romanovsky Soil moisture/temperature profile instrument box

TL-Top-netrad = Permanent Net Radiation sensor location 8/2016 forward
TL-Top-precip = Permanent Precipitation sensor location 8/2016 forward
TL-Top-snowpro = Permanent snow temperature profile location 8/2016 forward
TL-Top-SnowDepth1 = snow depth at MM Tripod 8/2016 forward
TL-Top-SnowDepth2 = snow depth away from tripod on top of a hummock deal 8/2016 forward
TL-Top-VATP = soil temperature 1 meter profile location 8/2016 forward
TL-Top-Tripd-WestLeg = Used a bigger tripod than for the bottom site so we surveyed in the legs
TL-Top-Tripd-EastLeg = Used a bigger tripod than for the bottom site so we surveyed in the legs
TL-Top-Tripd-NorthLeg = Used a bigger tripod than for the bottom site so we surveyed in the legs

As a CSV file these can be viewed directly in ArcGIS... It looks like I have a bit more work to do here...

Point ID,Northing,Easting,Elevation,Geoid Height,Latitude (Local),Longitude (Local),Attributes,X (ECEF),Y (ECEF),Z (ECEF)
new-netrad,7178296.860,454835.642,81.960,,64.72636,-165.94809,,-2648901.993,-662995.035,5744824.810
old-netrad,7178294.609,454862.839,80.916,,64.72635,-165.94752,,-2648896.565,-663021.755,5744823.078
new-precip,7178301.724,454843.494,81.919,,64.72641,-165.94793,,-2648895.716,-663001.485,5744826.900
old-precip,7178300.739,454855.192,81.383,,64.72640,-165.94768,,-2648893.360,-663012.973,5744826.069
new-snopro,7178296.643,454830.391,82.148,,64.72636,-165.94820,,-2648903.605,-662990.027,5744824.853
old-snopro,7178295.372,454827.643,82.058,,64.72635,-165.94826,,-2648905.381,-662987.657,5744824.212
new-station,7178298.590,454835.192,82.140,,64.72638,-165.94810,,-2648900.671,-662994.213,5744825.709
new-sw-stn,7178304.038,454885.819,75.960,,64.72644,-165.94704,,-2648880.391,-663041.256,5744822.770
old-atrh,7178297.340,454864.331,80.816,,64.72637,-165.94749,,-2648893.755,-663022.547,5744824.164
sr50a2,7178307.196,454840.181,82.300,,64.72646,-165.94800,,-2648891.941,-662997.040,5744829.560
teller2 0,7178948.902,454819.322,127.711,,64.73221,-165.94864,,-2648355.330,-662831.320,5745144.509
telsnw2,7178258.459,455055.399,83.085,,64.72605,-165.94347,,-2648879.756,-663216.660,5744810.828
xsec-pt1,7178307.626,454897.894,75.062,,64.72647,-165.94679,,-2648873.792,-663052.000,5744823.567
xsec-pt2,7178307.730,454898.200,75.067,,64.72647,-165.94678,,-2648873.625,-663052.272,5744823.618
xsec-pt3,7178307.635,454898.423,75.062,,64.72647,-165.94678,,-2648873.649,-663052.509,5744823.574
xsec-pt4,7178307.587,454898.545,75.063,,64.72647,-165.94677,,-2648873.660,-663052.639,5744823.555
xsec-pt5,7178307.582,454898.762,75.092,,64.72647,-165.94677,,-2648873.621,-663052.852,5744823.581
xsec-pt6,7178307.486,454898.875,75.192,,64.72647,-165.94677,,-2648873.717,-663052.995,5744823.631
xsec-pt7,7178307.441,454899.028,75.251,,64.72647,-165.94676,,-2648873.741,-663053.160,5744823.666
xsec-pt8,7178307.462,454899.287,75.421,,64.72647,-165.94676,,-2648873.727,-663053.422,5744823.831
xsec-pt9,7178307.770,454897.717,75.578,,64.72647,-165.94679,,-2648873.925,-663051.848,5744824.094
bridge1,7178305.827,454897.430,75.958,,64.72645,-165.94680,,-2648875.854,-663052.065,5744823.606
bridge2,7178305.408,454897.409,76.006,,64.72645,-165.94680,,-2648876.245,-663052.148,5744823.471
bridge3,7178306.011,454900.453,75.879,,64.72645,-165.94673,,-2648874.887,-663054.937,5744823.633
bridge4,7178305.505,454900.524,75.855,,64.72645,-165.94673,,-2648875.301,-663055.122,5744823.395
bxsec-disch1,7178305.994,454899.426,75.351,,64.72645,-165.94676,,-2648874.946,-663053.894,5744823.142
bxsec-disch2,7178305.952,454899.280,75.267,,64.72645,-165.94676,,-2648874.985,-663053.753,5744823.047
bxsec-disch3,7178305.956,454899.144,75.234,,64.72645,-165.94676,,-2648875.003,-663053.617,5744823.017
bxsec-disch4,7178306.012,454899.012,75.200,,64.72645,-165.94676,,-2648874.973,-663053.473,5744823.010
bxsec-disch5,7178305.980,454898.655,75.202,,64.72645,-165.94677,,-2648875.094,-663053.136,5744822.996
bxsec-disch6,7178305.929,454898.410,75.195,,64.72645,-165.94678,,-2648875.198,-663052.910,5744822.966
bxsec-disch7,7178305.957,454898.211,75.147,,64.72645,-165.94678,,-2648875.204,-663052.706,5744822.934
bxsec-disch8,7178305.929,454898.062,75.124,,64.72645,-165.94678,,-2648875.258,-663052.566,5744822.900
bxsec-disch9,7178305.899,454897.882,75.125,,64.72645,-165.94679,,-2648875.330,-663052.399,5744822.886
ptrb-1,7178307.895,454898.036,75.189,,64.72647,-165.94679,,-2648873.574,-663052.088,5744823.798
ptrb-2,7178307.933,454897.936,75.262,,64.72647,-165.94679,,-2648873.596,-663051.989,5744823.879
ptrb-3,7178308.449,454897.478,75.907,,64.72648,-165.94680,,-2648873.530,-663051.493,5744824.681