Difference between revisions of "Dbm6"

From IARC 207 Wiki
Jump to navigation Jump to search
 
Line 6: Line 6:
  
 
= site logs =
 
= site logs =
 +
 +
== Sept 9 2008 1:20pm ADT Emily ==
 +
*Possible bear charging station (according to Sue at Kavik) but no visible damage.
 +
*Install bear fence next year
 +
*Sr50 distance to ground is 143 cm before trimming vegetation
 +
*Trimmed vegetation and added bark below sensor
 +
*New distance is ~140cm (data logger program read 148 cm) and so changed to 140 cm in program.
  
 
== 13 Jun 2008 Emily & Ken ==
 
== 13 Jun 2008 Emily & Ken ==
 
* snow sensor distance is ~148 cm, changed old value of 150cm to new value of 148cm.
 
* snow sensor distance is ~148 cm, changed old value of 150cm to new value of 148cm.
 +
  
  

Latest revision as of 12:36, 17 September 2008

TODO

  • Check soil temperature,
  • Measure distance from ground to snow sensor,
  • reset antennae radio guy wires.

site logs

Sept 9 2008 1:20pm ADT Emily

  • Possible bear charging station (according to Sue at Kavik) but no visible damage.
  • Install bear fence next year
  • Sr50 distance to ground is 143 cm before trimming vegetation
  • Trimmed vegetation and added bark below sensor
  • New distance is ~140cm (data logger program read 148 cm) and so changed to 140 cm in program.

13 Jun 2008 Emily & Ken

  • snow sensor distance is ~148 cm, changed old value of 150cm to new value of 148cm.


03 Sept 2007, Ken I.

Transcribed EKY

  • downloaded data, saved old program, updated new program
  • site looks good
  • antennae radio pole vertical but the guys are loose, need to reset

29 Aug 2007, Ken I

Transcribed EKY

  • Tripod looks good
  • Precip good
  • Radiation pole, 1 guy detached
    • reset radiation pole turn buckles and wired them to secure
  • Net rad is level, 111 cm to ground from sensor, but grass is 10 cm higher, birch (?) to 15 cm higher
  • SR50 is 148 cm to ground
  • Rotated SR50 pole to secure to guy wire via tie wrap