Difference between revisions of "2008 August Nome Trip"

From IARC 207 Wiki
Jump to navigation Jump to search
 
(6 intermediate revisions by 4 users not shown)
Line 1: Line 1:
K1 - thermistor string
+
Here's the tentative schedule:
 +
(Reservations made at the Aurora for 8/24, 25 conf # M574010)
  
K2
 
  
K3 - thermistor string
+
==August 24 Fairbanks to Nome and Logisitcs==
 +
* Fly to Nome
 +
* Needs 1 truck and a hotel room at the Aurora.
 +
* Prep for Saturday helicopter stuff.
 +
* Add new radio # to the base station.
 +
Entry  Number    Repeater1  Repeater2
 +
(3)    555-5555  906-6286    906-6018
 +
(4)    999-9999  916-4340
 +
* Get food for later in trip
 +
* Make sure a generator in Nome works
 +
* make sure there are enough holes in the instrument box:
 +
** radio coax
 +
** power from battery
 +
** power from solar panel
  
Skookum - white duck tape
+
* Purchased plates, cutlery, bowls, and TP at the AC
  
Kigluiaks -second repeater
 
  
Anvil
+
Address book on 10/6/08:
 +
<pre>
 +
                                MODEM CALL BOOK
 +
                                Entry to Call is 03
 +
Entry    Number    Repeater1    Repeater2
 +
(0)    555-5555    906-6286
 +
(1)    555-5555    906-6286    906-6041
 +
(2)    555-5555    906-6286    906-6018
 +
(3)    555-5555    906-6286    906-6041
 +
(4)    999-9999    906-6011
 +
(5)    555-5555    906-6286    906-6018
 +
(6)    999-9999    906-6044
 +
(7)    555-5555    906-6286    906-6018
 +
(8)    999-9999    916-4340
 +
(9)    000-0000
 +
(C)    Change Entry to Use (0-9) or A(ALL)
 +
(Esc)  Exit to Main Menu
 +
</pre>
  
C1 - battery, thermistor string
+
==August 25 Kigluaiks Repeater visit==
 +
* Visit Bering Air to iron out helicopter details (7:30am).
 +
* Drive to Kigluaiks parking spot and await air lift.
 +
* Helicopter to service the high elevation repeater stations & install new repeater at Kigluaiks.
 +
* New repeater:
 +
** Bring: 3m tower
 +
*** bolts to connect 3 legs to base, instrument box to tower, unistrut to instrument box.
 +
*** pipe wrench to tighten base vertical pipe
 +
*** antenna, mounting bracket, radio cable
 +
*** solar panel & extension cord for powering
 +
*** 2 batteries & battery box, Red & black battery jumper cables, fuse & holder
 +
*** instrument box, radio, data logger, charge controller, plumbers putty
 +
*** toolbag
 +
*** Bear spray in waterproof bag
 +
** Take pictures & GPS coords of new site
  
C3 - thermistor string
+
* Old Kigluaiks repeater:
 
+
** Check frequency key on radio (should be 5)
Special stuff to bring:
+
** Replace HMP45C here
Omni antenna
 
Freewave ?
 
 
 
Stuff to bring back to Fairbanks:
 
Eppley Radiometers for calibration
 
REBS Radiometers for calibration
 
 
 
Here's the tenetive schedule:
 
(Reservations made at the Aurora for 8/24, 25 conf # M574010)
 
  
August 24 Jessie’s group arrives, gets organized. Needs 1 truck and a hotel room at the Aurora.
+
* After repeater is installed:
 +
** Return to Nome.
 +
** Things to pick up from Nome storage:
 +
*** Canoe
 +
*** Council radiometer cases: 2 LW, 2 SW, 2 Net
 +
*** C2 new battery
 +
*** Hilti & generator
 +
*** shovel
 +
*** hand maul (for tower straightening if needed)
 +
*** Replacement snow depth sensor for C1 grid
 +
** Stay in a hotel room in Nome.
  
August 25 Jessie’s group uses the helicopter to service the high elevation repeater stations & install new repeater at Kigluaiks. Pickup canoe in Nome. Stay in a hotel room in Nome.
+
==August 26 Council Area==
 +
* head to Council area with canoe
 +
*C1 Grid
 +
** pull net radiometer
 +
** Check frequency key on radio (should be 5)
 +
** install thermistor string
 +
*** bring liquid-tite for animal protection
 +
*** bring Hilti and generator to dig the hole
 +
** snip vegetation below snow sensor
 +
** Try to fix precip bucket so it's vertical. (still missed rain this summer)
 +
* C2 Blueberry
 +
** Check frequency key on radio (should be 5)
 +
** take up another battery
 +
** pull all radiometers (net, short and long)
 +
** snip vegetation below snow sensor
 +
** install new thermistor string, dig hole
 +
*** bring liquid-tite for animal protection.
 +
**Programming:
 +
*** change program so snow depth and distance are being saved (now it's distance x 2)
 +
*** Another program thing: precip here is flatlined at 12 for some weird reason (in output data).
 +
* Skookum Pass
 +
** Cover black tape with white tape on AT/RH sensor
 +
** Check frequency key on radio (should be 5)
 +
*Back in Nome
 +
** Get gas for ATV
 +
** Drop off canoe
 +
** change out transducer in SR50A from C1 grid (for use at K1)
 +
** Pick up ATV in Nome. (Might need ramps but hopefully not)
 +
** Drive to Quartz Creek camp.
  
August 26 Jessie and Bob head to Council area with canoe, check Blueberry and CALM tower sites. Check Skookum pass on the way back. Picks up ATV in Nome. Drive to Quartz Creek camp.
+
==August 27 Kougarok area==
 +
* K1 Burn:
 +
** SR50A transducer needs replacing
 +
** Better secure the transducer at K1, too
 +
** Bring out Rebar and hose clamps to secure cross arm to the legs maybe
 +
** First 2 Soil moistures may still work here, got a couple legit looking readings earlier this summer.  Rest are still garbage. so maybe check them out.
 +
** New thermistor string
 +
*** Hilti & generator
 +
*** Liquid-tite
 +
** pull net radiometers
 +
* snip vegetation below snow sensor
 +
* K2 Met
 +
** Pull all radiometers (radiometer cases are in Quartz Creek Conex)
 +
** Active Layer measurements @ site (north and then east of station in L)
 +
** snip vegetation below snow sensor
 +
* camp at quartz creek
  
August 27 Jessie and Bob visit K1 and K2 met sites (camp at Quartz Creek).
 
  
August 28 Jessie’s group waits for Fritz’s group to arrive, they head out to CALM grid and K3 met sites together, return to Nome, leave canoe, fly home.
+
==August 28 Kougarok area==
 +
* Wait for Fritz' group to arrive
 +
* Once they arrive get their help to put old ATV into truck.
 +
* Head out to K3 & CALM grid together
 +
* K3 Mauze
 +
** take out 2 batteries
 +
** bring back net radiometer
 +
** snip vegetation below snow sensor
 +
** thermistor string
 +
*** Hilti & generator
 +
*** liquid-tite
 +
*** shovel
 +
* Stuff to bring back to Fairbanks:
 +
** Eppley Radiometers for calibration
 +
** REBS Radiometers for calibration
 +
* Drop ATV at Nome storage
 +
* Return to Fairbanks

Latest revision as of 11:18, 6 October 2008

Here's the tentative schedule: (Reservations made at the Aurora for 8/24, 25 conf # M574010)


August 24 Fairbanks to Nome and Logisitcs

  • Fly to Nome
  • Needs 1 truck and a hotel room at the Aurora.
  • Prep for Saturday helicopter stuff.
  • Add new radio # to the base station.
Entry  Number    Repeater1   Repeater2
(3)    555-5555  906-6286    906-6018
(4)    999-9999  916-4340
  • Get food for later in trip
  • Make sure a generator in Nome works
  • make sure there are enough holes in the instrument box:
    • radio coax
    • power from battery
    • power from solar panel
  • Purchased plates, cutlery, bowls, and TP at the AC


Address book on 10/6/08:

                                MODEM CALL BOOK
                                Entry to Call is 03
Entry    Number     Repeater1    Repeater2
(0)     555-5555     906-6286
(1)     555-5555     906-6286     906-6041
(2)     555-5555     906-6286     906-6018
(3)     555-5555     906-6286     906-6041
(4)     999-9999     906-6011
(5)     555-5555     906-6286     906-6018
(6)     999-9999     906-6044
(7)     555-5555     906-6286     906-6018
(8)     999-9999     916-4340
(9)     000-0000
(C)     Change Entry to Use (0-9) or A(ALL)
(Esc)   Exit to Main Menu

August 25 Kigluaiks Repeater visit

  • Visit Bering Air to iron out helicopter details (7:30am).
  • Drive to Kigluaiks parking spot and await air lift.
  • Helicopter to service the high elevation repeater stations & install new repeater at Kigluaiks.
  • New repeater:
    • Bring: 3m tower
      • bolts to connect 3 legs to base, instrument box to tower, unistrut to instrument box.
      • pipe wrench to tighten base vertical pipe
      • antenna, mounting bracket, radio cable
      • solar panel & extension cord for powering
      • 2 batteries & battery box, Red & black battery jumper cables, fuse & holder
      • instrument box, radio, data logger, charge controller, plumbers putty
      • toolbag
      • Bear spray in waterproof bag
    • Take pictures & GPS coords of new site
  • Old Kigluaiks repeater:
    • Check frequency key on radio (should be 5)
    • Replace HMP45C here
  • After repeater is installed:
    • Return to Nome.
    • Things to pick up from Nome storage:
      • Canoe
      • Council radiometer cases: 2 LW, 2 SW, 2 Net
      • C2 new battery
      • Hilti & generator
      • shovel
      • hand maul (for tower straightening if needed)
      • Replacement snow depth sensor for C1 grid
    • Stay in a hotel room in Nome.

August 26 Council Area

  • head to Council area with canoe
  • C1 Grid
    • pull net radiometer
    • Check frequency key on radio (should be 5)
    • install thermistor string
      • bring liquid-tite for animal protection
      • bring Hilti and generator to dig the hole
    • snip vegetation below snow sensor
    • Try to fix precip bucket so it's vertical. (still missed rain this summer)
  • C2 Blueberry
    • Check frequency key on radio (should be 5)
    • take up another battery
    • pull all radiometers (net, short and long)
    • snip vegetation below snow sensor
    • install new thermistor string, dig hole
      • bring liquid-tite for animal protection.
    • Programming:
      • change program so snow depth and distance are being saved (now it's distance x 2)
      • Another program thing: precip here is flatlined at 12 for some weird reason (in output data).
  • Skookum Pass
    • Cover black tape with white tape on AT/RH sensor
    • Check frequency key on radio (should be 5)
  • Back in Nome
    • Get gas for ATV
    • Drop off canoe
    • change out transducer in SR50A from C1 grid (for use at K1)
    • Pick up ATV in Nome. (Might need ramps but hopefully not)
    • Drive to Quartz Creek camp.

August 27 Kougarok area

  • K1 Burn:
    • SR50A transducer needs replacing
    • Better secure the transducer at K1, too
    • Bring out Rebar and hose clamps to secure cross arm to the legs maybe
    • First 2 Soil moistures may still work here, got a couple legit looking readings earlier this summer. Rest are still garbage. so maybe check them out.
    • New thermistor string
      • Hilti & generator
      • Liquid-tite
    • pull net radiometers
  • snip vegetation below snow sensor
  • K2 Met
    • Pull all radiometers (radiometer cases are in Quartz Creek Conex)
    • Active Layer measurements @ site (north and then east of station in L)
    • snip vegetation below snow sensor
  • camp at quartz creek


August 28 Kougarok area

  • Wait for Fritz' group to arrive
  • Once they arrive get their help to put old ATV into truck.
  • Head out to K3 & CALM grid together
  • K3 Mauze
    • take out 2 batteries
    • bring back net radiometer
    • snip vegetation below snow sensor
    • thermistor string
      • Hilti & generator
      • liquid-tite
      • shovel
  • Stuff to bring back to Fairbanks:
    • Eppley Radiometers for calibration
    • REBS Radiometers for calibration
  • Drop ATV at Nome storage
  • Return to Fairbanks