Difference between revisions of "Toolik DOT 2011-05-16"
Jump to navigation
Jump to search
Line 19: | Line 19: | ||
====Stuff at Itkillik for UMC & Itikmalakpak==== | ====Stuff at Itkillik for UMC & Itikmalakpak==== | ||
* sawzall & blade | * sawzall & blade | ||
+ | * backup hand saw | ||
* flange plate & hardware | * flange plate & hardware | ||
* hose clamps? (I think they're in the flange plate bag) | * hose clamps? (I think they're in the flange plate bag) |
Revision as of 09:06, 16 May 2011
Contents
Tasks
Itkillik
- Install New SDI12 PTs
- 5 psig sensor
- Program address @ camp
- Gunsight CR1000 / laptop / serial cable
- run through conduit @ camp
- bring dessicant out for 2nd pt
- bring out another screed stake or two for this PT
- Program address @ camp
- 5 psig sensor
- Install second hobo
- Survey GPS
- Download data
- Restart
- Snow survey
- bring new sat phone
- TSCe
- Laptop
Stuff at Itkillik for UMC & Itikmalakpak
- sawzall & blade
- backup hand saw
- flange plate & hardware
- hose clamps? (I think they're in the flange plate bag)
Upper May Creek
- Tipping Bucket / windshield replacement
- shields are currently in snowmachine trailer
- hoseclamps & screws are in a ziploc with a green bottom
- clear snow from ground surface
- place wooden cross pieces on the ground
- screw the flanges to the wooden cross pieces
- twist the altershield vertical members into the flanges
- hang the alter shield
- cut the precip pipe so precip bucket comes to within 1/2" to 1" below altershield
- hoseclamp precip bucket to center pipe
- download camera images
Itikmalakpak
- Tipping Bucket / windshield replacement
- shields are currently in snowmachine trailer
- track down flange & wood screws
- download camera images
Tools
- Bob's toolbags
- cordless drill to screw precip deals in place
- sawzall to cut precip pipe to length
- serial cable
Things to do in Toolik
- Update firmware on streampro