Difference between revisions of "2015 July Nome Trip"

From IARC 207 Wiki
Jump to navigation Jump to search
 
Line 5: Line 5:
 
* review programs again.
 
* review programs again.
 
* CR1000 for K3 site... add full program if time allows
 
* CR1000 for K3 site... add full program if time allows
* change out Lithium batteries on CR1000s that need it.
 
  
 
===To bring back===
 
===To bring back===
Line 11: Line 10:
  
 
===To Bring===
 
===To Bring===
* Make sure
 
 
* Electricians putty
 
* Electricians putty
 
* Temperature sensors for repeater sites
 
* Temperature sensors for repeater sites
Line 29: Line 27:
 
** lithium battery
 
** lithium battery
 
** bluetooth speaker
 
** bluetooth speaker
 +
* CR2032 batteries for Kenji's Hobos
 +
* Diode for Anvil Mountain
  
 
===To Buy===
 
===To Buy===
Line 47: Line 47:
 
*
 
*
  
===Skookum===
 
* Add Temperature for air temp
 
  
 +
===Monday 7/27:===
 +
* Fly to Nome
 +
* pick up vehicle
 +
* visit storage
 +
** pick up water jugs
 +
** cooler
 +
*** get water @ hotel
 +
** get pepper spray (from store or storage depending)
 +
* get a cross arm & extra rod / pipe from nome storage for shrub site radiation
 +
* grocery store
 +
** yogurt & garbage snacks
 +
** coke etc
 +
** ice for cooler
 +
* get set up in Kougarok & download data from the sites over radio network.
 +
 +
===Tuesday 7/28:===
 +
* if there is time in the morning, run over to K2 Met and do required things there.
 +
* Take crew from Nome to K3 Mauze
 +
* Add a CR1000 and radiation sensors
 +
* bring cable protection
 +
* and PEP radiometers to site. (brown tape calibration information)
 +
 +
===Wednesday 7/29:===
 +
* If K2 is done then try to visit the Kigluaiks Site
 +
* If Kig site is inaccessible then visit Council: C1, Kenji's site, Skookum
 +
* Or, chill with rest of NGEE team
 +
* Return to Nome
 +
 +
===Thursday 7/30:===
 +
* Chill with rest of NGEE team
 +
* Spend night in Nome
 +
 +
===Friday 7/31:==
 +
* Return to Fairbanks
  
===C1 Grid===
 
* Replace SR50A
 
* level precip bucket
 
  
=== C2 Blueberry===
+
Stuff to do:
* If river is passable (doesn't look like it at the moment from the precip gauges)
+
C1 Grid
* Replace Snow Transducer
+
* Re-level precip bucket
* Desiccant
 
* Download Program
 
  
=== Kenji===
+
Kenji Bear Creek:
* Visit Anvil School site
+
* replace hobo and soil surface / well temperature sensors
* Visit Bear Creek Site
 
** re-establish site... ask Bill & Lily for temperature cable
 
  
===Itinerary===
+
Skookum Pass
* 7/21 Fly out with Bill
+
* Replace CR10X w/ pakbus CR10X
** Visit Storage
+
** program and update firmware in Fairbanks first... test...
** Visit Anvil City?
+
* add radiation shield for air temperature sensor
** Visit Anvil Mountain?
 
  
* 7/22
+
Anvil City
** Drop Bill at the airport
+
* look in box to see what Chas left.
** Drive out to Council
 
*** C1 Grid
 
*** Skookum
 
  
* 7/23
+
Kigulaiks
** run out to Quartz Creek and connect to the sites via radio
+
* Replace CR10X w/ pakbus CR10X
** if time visit the Kigluaiks site
+
** program and update firmware in Fairbanks first... test...
 +
* add radiation shield for air temperature sensor
 +
* add PRT sensor for air temperature
 +
** bring out precision resistor for PRT
  
* 7/24
+
Anvil Mountain
** Meet Bill and Vlad back in Nome
+
* Replace CR10X w/ pakbus CR10X
** Visit Anvil City?
+
** program and update firmware in Fairbanks first... test...
** Visit Anvil Mountain?
+
* add radiation shield for air temperature sensor
 +
* add PRT sensor for air temperature
 +
** bring out precision resistor for PRT
  
* 7/25
+
K1 Burn
** Help Bill & Vlad
+
* Download data over radio network
  
* 7/26
+
K2 Met
** Return to Fairbanks
+
* bring out supplies to firm up guy wire anchors for tower and radiation tower
 +
* examine tower to see if it is safe for climbing
 +
* download data
 +
* replace desiccant in radiometers
 +
* remove CR800
  
Forgot List:
+
K3 Mauze Gulch
* waterproof camera battery charger
+
* bring out cross arm and additional support for CNR4
* CR2032 batteries for Kenji's Hobos
+
* remove CNR4 bracket from PEP?
* Diode for Anvil Mountain
+
* SI-111 bracket for cross arm
 +
* download data
 +
* bring out CR1000 for radiation
 +
* wire to power CR1000 from existing CR10X
 +
 
 +
 
 +
To Do in Fairbanks:
 +
* Look over Lily's data list again :https://docs.google.com/document/d/1O7GPQrjCoNKs9fV2-_FnjAkilxY_XUGOqsHWV2C-DeI/edit
 +
* Bring out a base radio to download data from all the sites.
 +
** need to track down 12 volt cig adapter

Revision as of 16:55, 23 July 2015

PreTrip To Do

  • dessicant
  • load maps onto phone / touch pad
  • review programs again.
  • CR1000 for K3 site... add full program if time allows

To bring back

To Bring

  • Electricians putty
  • Temperature sensors for repeater sites
  • lithium backup battery w/ charger
  • Delorme Deal
  • Satphone
  • fieldbook
  • SR50As
  • maps for kigluaiks
  • toolbags
  • volt meter
  • 3 pieces 107 probe & radiation shield for the repeaters
  • gopro w/ chest mount
  • Chargers
    • USB for Gopro / delorme
    • phone
    • lithium battery
    • bluetooth speaker
  • CR2032 batteries for Kenji's Hobos
  • Diode for Anvil Mountain

To Buy

  • screw in anchors for radiation towers and 10 meter tripods


To grab from storage

  • Pepper Spray
  • hand maul for tower
  • pipe the right size is in there

Anvil Mountain

  • Add 107 Temperature for air temperature
    • modify program
  • Look at WS again
    • bring out a diode.
  • See about fixing HMP45c


Monday 7/27:

  • Fly to Nome
  • pick up vehicle
  • visit storage
    • pick up water jugs
    • cooler
      • get water @ hotel
    • get pepper spray (from store or storage depending)
  • get a cross arm & extra rod / pipe from nome storage for shrub site radiation
  • grocery store
    • yogurt & garbage snacks
    • coke etc
    • ice for cooler
  • get set up in Kougarok & download data from the sites over radio network.

Tuesday 7/28:

  • if there is time in the morning, run over to K2 Met and do required things there.
  • Take crew from Nome to K3 Mauze
  • Add a CR1000 and radiation sensors
  • bring cable protection
  • and PEP radiometers to site. (brown tape calibration information)

Wednesday 7/29:

  • If K2 is done then try to visit the Kigluaiks Site
  • If Kig site is inaccessible then visit Council: C1, Kenji's site, Skookum
  • Or, chill with rest of NGEE team
  • Return to Nome

Thursday 7/30:

  • Chill with rest of NGEE team
  • Spend night in Nome

=Friday 7/31:

  • Return to Fairbanks


Stuff to do: C1 Grid

  • Re-level precip bucket

Kenji Bear Creek:

  • replace hobo and soil surface / well temperature sensors

Skookum Pass

  • Replace CR10X w/ pakbus CR10X
    • program and update firmware in Fairbanks first... test...
  • add radiation shield for air temperature sensor

Anvil City

  • look in box to see what Chas left.

Kigulaiks

  • Replace CR10X w/ pakbus CR10X
    • program and update firmware in Fairbanks first... test...
  • add radiation shield for air temperature sensor
  • add PRT sensor for air temperature
    • bring out precision resistor for PRT

Anvil Mountain

  • Replace CR10X w/ pakbus CR10X
    • program and update firmware in Fairbanks first... test...
  • add radiation shield for air temperature sensor
  • add PRT sensor for air temperature
    • bring out precision resistor for PRT

K1 Burn

  • Download data over radio network

K2 Met

  • bring out supplies to firm up guy wire anchors for tower and radiation tower
  • examine tower to see if it is safe for climbing
  • download data
  • replace desiccant in radiometers
  • remove CR800

K3 Mauze Gulch

  • bring out cross arm and additional support for CNR4
  • remove CNR4 bracket from PEP?
  • SI-111 bracket for cross arm
  • download data
  • bring out CR1000 for radiation
  • wire to power CR1000 from existing CR10X


To Do in Fairbanks: