Difference between revisions of "Teller Lower Station"
Jump to navigation
Jump to search
(Created page with "Tape Color is '''BLUE''' To Bring: * Put the 3m tripod built from tripod kit here. * 015103 WS/WD ** Make up cable for it * CR200 for measuring Pressure Transducers * ''5 pcs...") |
|||
| Line 1: | Line 1: | ||
Tape Color is '''BLUE''' | Tape Color is '''BLUE''' | ||
| − | To Bring: | + | ===To Bring:=== |
* Put the 3m tripod built from tripod kit here. | * Put the 3m tripod built from tripod kit here. | ||
| + | ** Needs 1.5" mast... cut pipe from April that was unused and add coupler | ||
| + | ** needs 1.5" to 1" coupler... purchase | ||
| + | ** needs 1" mast... purchase | ||
| + | ** Use 1.5" Net Radiation cross arm here. | ||
| + | ** Cut | ||
| + | * Battery box in basement needs holes cut for 1/2" liquid-tite (ship battery box filled with instruments | ||
| + | * Instrument box with 1 CR1000 and AM416 is on site | ||
| + | * Bring a second instrument box with 1 AM16/32 for met instruments. | ||
| + | |||
| + | ===Outstanding Tripod items=== | ||
| + | * Cross arm support brackets and such | ||
| + | * mount am16/32 to second instrument box | ||
| + | * send instruments & battery box on second freight run | ||
| + | * Stabilizer for net radiometer support arm. | ||
| + | ** used cross arm brackets last time... need to dig them out and make sure we have enough. | ||
| + | ** also could use ubolts and unistrut. | ||
| + | |||
| + | ===Sensors=== | ||
| + | ====To Bring:==== | ||
* 015103 WS/WD | * 015103 WS/WD | ||
** Make up cable for it | ** Make up cable for it | ||
| Line 11: | Line 30: | ||
** also interface board | ** also interface board | ||
** also measure the heater resistance of each | ** also measure the heater resistance of each | ||
| − | |||
* Cable protection | * Cable protection | ||
* cable ties & hose clamps for securing cabling to tripod | * cable ties & hose clamps for securing cabling to tripod | ||
| − | |||
| − | |||
Already at site: | Already at site: | ||
* HMP155 | * HMP155 | ||
** thinking about bringing out a replacement temperature head though because the one in place has been on the fritz over the summer. | ** thinking about bringing out a replacement temperature head though because the one in place has been on the fritz over the summer. | ||
* TE525MM | * TE525MM | ||
| + | * CNR4 w/bracket | ||
| + | |||
| + | |||
| + | To Ship: | ||
| + | * Tripod | ||
| + | * | ||
Revision as of 17:37, 2 August 2016
Tape Color is BLUE
To Bring:
- Put the 3m tripod built from tripod kit here.
- Needs 1.5" mast... cut pipe from April that was unused and add coupler
- needs 1.5" to 1" coupler... purchase
- needs 1" mast... purchase
- Use 1.5" Net Radiation cross arm here.
- Cut
- Battery box in basement needs holes cut for 1/2" liquid-tite (ship battery box filled with instruments
- Instrument box with 1 CR1000 and AM416 is on site
- Bring a second instrument box with 1 AM16/32 for met instruments.
Outstanding Tripod items
- Cross arm support brackets and such
- mount am16/32 to second instrument box
- send instruments & battery box on second freight run
- Stabilizer for net radiometer support arm.
- used cross arm brackets last time... need to dig them out and make sure we have enough.
- also could use ubolts and unistrut.
Sensors
To Bring:
- 015103 WS/WD
- Make up cable for it
- CR200 for measuring Pressure Transducers
- 5 pcs VITEL Hydraprobe II
- Need to set IDs
- 4 pcs East30 sensors thermal conductivity or specific heat
- also interface board
- also measure the heater resistance of each
- Cable protection
- cable ties & hose clamps for securing cabling to tripod
Already at site:
- HMP155
- thinking about bringing out a replacement temperature head though because the one in place has been on the fritz over the summer.
- TE525MM
- CNR4 w/bracket
To Ship:
- Tripod
