Difference between revisions of "Teller Lower Station"

From IARC 207 Wiki
Jump to navigation Jump to search
Line 2: Line 2:
  
 
===To Bring:===
 
===To Bring:===
* Put the 3m tripod built from tripod kit here.
+
* Put the 3m tripod built from tripod kit here. (The heaviest steel tripod, blue tape on it)
** Needs 1.5" mast... cut pipe from April that was unused and add coupler
 
** needs 1.5" to 1" coupler... purchase
 
** needs 1" mast... purchase
 
** Use 1.5" Net Radiation cross arm here.
 
** Cut
 
 
* Battery box in basement needs holes cut for 1/2" liquid-tite (ship battery box filled with instruments
 
* Battery box in basement needs holes cut for 1/2" liquid-tite (ship battery box filled with instruments
 
* Instrument box with 1 CR1000 and AM416 is on site
 
* Instrument box with 1 CR1000 and AM416 is on site
Line 19: Line 14:
 
** used cross arm brackets last time... need to dig them out and make sure we have enough.
 
** used cross arm brackets last time... need to dig them out and make sure we have enough.
 
** also could use ubolts and unistrut.
 
** also could use ubolts and unistrut.
 +
====Cross Arms====
 +
* Net Radiometer skin temperature
 +
** need to track down unistrut & strut clamps for stabilization (or ubolts)
 +
* small cross arm for air temperature
 +
* RM Young should mount to top without issue.
 +
* Precip stand is already out there
 +
* Need to figure out where NDVI sensors point. & do we have all supplies for that...
 +
  
 
===Sensors===
 
===Sensors===
Line 38: Line 41:
 
* CNR4 w/bracket
 
* CNR4 w/bracket
  
 +
===Extras===
 +
* need to yet sort out how Met AM16/32 will attach
 +
* need to drill out second instrument box so that cables can enter.
 +
* Need to permanentify the solar panel
 +
** bring solar panel from Fairbanks and but need to make a mount for it yet.
 +
* Measure East30 sensor resistance
 +
* label all subsurface sensors
 +
* Need to survey in all instruments with GPS
 +
* Reuse batteries that are already out here, no new batteries needed.
 +
* think about how to mount iridium here...
  
 
To Ship:
 
To Ship:
 
* Tripod
 
* Tripod
 
*
 
*

Revision as of 22:37, 2 August 2016

Tape Color is BLUE

To Bring:

  • Put the 3m tripod built from tripod kit here. (The heaviest steel tripod, blue tape on it)
  • Battery box in basement needs holes cut for 1/2" liquid-tite (ship battery box filled with instruments
  • Instrument box with 1 CR1000 and AM416 is on site
  • Bring a second instrument box with 1 AM16/32 for met instruments.

Outstanding Tripod items

  • Cross arm support brackets and such
  • mount am16/32 to second instrument box
  • send instruments & battery box on second freight run
  • Stabilizer for net radiometer support arm.
    • used cross arm brackets last time... need to dig them out and make sure we have enough.
    • also could use ubolts and unistrut.

Cross Arms

  • Net Radiometer skin temperature
    • need to track down unistrut & strut clamps for stabilization (or ubolts)
  • small cross arm for air temperature
  • RM Young should mount to top without issue.
  • Precip stand is already out there
  • Need to figure out where NDVI sensors point. & do we have all supplies for that...


Sensors

To Bring:

  • 015103 WS/WD
    • Make up cable for it
  • CR200 for measuring Pressure Transducers
  • 5 pcs VITEL Hydraprobe II
    • Need to set IDs
  • 4 pcs East30 sensors thermal conductivity or specific heat
    • also interface board
    • also measure the heater resistance of each
  • Cable protection
  • cable ties & hose clamps for securing cabling to tripod

Already at site:

  • HMP155
    • thinking about bringing out a replacement temperature head though because the one in place has been on the fritz over the summer.
  • TE525MM
  • CNR4 w/bracket

Extras

  • need to yet sort out how Met AM16/32 will attach
  • need to drill out second instrument box so that cables can enter.
  • Need to permanentify the solar panel
    • bring solar panel from Fairbanks and but need to make a mount for it yet.
  • Measure East30 sensor resistance
  • label all subsurface sensors
  • Need to survey in all instruments with GPS
  • Reuse batteries that are already out here, no new batteries needed.
  • think about how to mount iridium here...

To Ship:

  • Tripod