Difference between revisions of "Teller Lower Station"

From IARC 207 Wiki
Jump to navigation Jump to search
Line 1: Line 1:
 
Tape Color is '''BLUE'''
 
Tape Color is '''BLUE'''
  
===To Bring:===
+
===In Nome Storage:===
 
+
* jumpers for last battery
===Outstanding Items===
+
* soil sampling cylinders for soil pit
* Make Discharge Measurement
 
** Tools:
 
** Cloth Tape
 
* Need to bring out
 
* 1" Al pipe for away from tripod snow stand... can skinny pipe be made to work?
 
** Tools: 1/2" nut driver / wrench
 
* Declination is 11 degrees... correct this later using datapro function.
 
* XX use battery box tarp to flop soil pit lid onto.
 
** tape measure
 
** saw
 
** tarp
 
** shovel
 
* camera power
 
* XX terminal strips for SDI 12 devices.
 
* XX 1"x1ft stub for net radiation
 
* XX guy wires for snow stand
 
* mount camera
 
* fix program problems:
 
** Resistance logging
 
** soil temperature logging
 
** check to see that east 30 sensors are good with the jumper wire in place
 
**
 
 
 
====Cross Arms====
 
* Net Radiometer skin temperature
 
** need to track down unistrut & strut clamps for stabilization (or ubolts)
 
* small cross arm for air temperature
 
* RM Young should mount to top without issue.
 
* Precip stand is already out there
 
* Need to figure out where NDVI sensors point. & do we have all supplies for that...
 
 
 
 
 
===Sensors===
 
====To Bring:====
 
* 015103 WS/WD
 
** Make up cable for it
 
* CR200 for measuring Pressure Transducers
 
* ''5 pcs'' VITEL Hydraprobe II
 
* ''4 pcs'' East30 sensors thermal conductivity or specific heat
 
** also interface board
 
** also measure the heater resistance of each
 
* Cable protection
 
* cable ties & hose clamps for securing cabling to tripod
 
* VATP 1504 - see email for thermistor calibration offsets
 
 
 
====Sensor Heights====
 
* Anemometer @ top of tripod  / ~3 meters
 
* HMP155 @ 1.5m above ground surface
 
* Barometric Pressure - in instrument box
 
* Net Radiation -
 
* Snow Temperature profile -- ground surface in the shrubs
 
* Snow Depth 1 -- 2m on cross arm off station
 
* Snow Depth 2 -- in shrubs on a stand.
 
 
 
 
 
Already at site:
 
* HMP155
 
** thinking about bringing out a replacement temperature head though because the one in place has been on the fritz over the summer.
 
* TE525MM
 
* CNR4 w/bracket
 
* Two Batteries
 
* Solar Panel
 
* Charge Controller
 
 
 
 
 
  
 +
===At Site===
 +
* duct seal for all connections
 +
* soil pit sensors in large actionpacker
  
 
===Extras===
 
===Extras===
 
* think about how to mount iridium here...
 
* think about how to mount iridium here...
 
*Bring covers from Fairbanks to cover unitstrut ends like tennis balls.
 
*Bring covers from Fairbanks to cover unitstrut ends like tennis balls.
 +
 +
===Left to fix===
 +
* Decagon SRS sensors... test again in Fairbanks
 +
* Thermal Conductivity sensors... figure out their deal...
 +
 +
* Review fieldbook

Revision as of 14:43, 19 August 2016

Tape Color is BLUE

In Nome Storage:

  • jumpers for last battery
  • soil sampling cylinders for soil pit

At Site

  • duct seal for all connections
  • soil pit sensors in large actionpacker

Extras

  • think about how to mount iridium here...
  • Bring covers from Fairbanks to cover unitstrut ends like tennis balls.

Left to fix

  • Decagon SRS sensors... test again in Fairbanks
  • Thermal Conductivity sensors... figure out their deal...
  • Review fieldbook