Difference between revisions of "Spring 2017 visit"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
** bring up couple SW12V | ** bring up couple SW12V | ||
*change desiccant in CNR4 | *change desiccant in CNR4 | ||
| + | *clean all rad sensor domes with cloth | ||
| + | ===bf5 sunshine sensor=== | ||
| + | *install BF5 sensor | ||
| + | ** tripod is 9ft7in from tower. cable is 5m. so this ''should'' work out | ||
| + | **bring some spare AC power line, inverters and plugs to set up power for heater. | ||
| + | |||
| + | ===organize the enclosure=== | ||
| + | **zip ties of many colors and sizes | ||
| + | **wires of many colors (mostly red and black) | ||
| + | **white wire connector things | ||
| + | ===evap pan=== | ||
| + | |||
| + | |||
| + | ===little activities=== | ||
*stabilize underwater par sensor with second string for cleaning | *stabilize underwater par sensor with second string for cleaning | ||
*add terrestrial quantum to sensor wiring notes at top of program | *add terrestrial quantum to sensor wiring notes at top of program | ||
| Line 19: | Line 33: | ||
*check if pluvio is pointing north | *check if pluvio is pointing north | ||
*think about soil temps- at least find them | *think about soil temps- at least find them | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
===at toolik=== | ===at toolik=== | ||
Revision as of 15:26, 1 June 2017
Contents
CNR4
- Check out the status of the heater wiring for CNR4
- is it even wired? to which ports?
- change the program notes if wired
- change program controls for heater
- bring up couple SW12V
- change desiccant in CNR4
- clean all rad sensor domes with cloth
bf5 sunshine sensor
- install BF5 sensor
- tripod is 9ft7in from tower. cable is 5m. so this should work out
- bring some spare AC power line, inverters and plugs to set up power for heater.
organize the enclosure
- zip ties of many colors and sizes
- wires of many colors (mostly red and black)
- white wire connector things
evap pan
little activities
- stabilize underwater par sensor with second string for cleaning
- add terrestrial quantum to sensor wiring notes at top of program
- check what the calconnector looks like for lake PAR.
- maybe need to buy a second one so can coordinate with calibration swaps
- its reading negative because the sensor head was swapped wrong, but this isn't an issue.
- change notes in program where measure pressure to change CS100 to CS106
- remove sea level offset
- get serial number for radios
- get height of terrestrial PAR
- check if pluvio is pointing north
- think about soil temps- at least find them
at toolik
- go through all metadata - remember the comments column
- think about PAR sensors
- upgrade loggernet
to bring
- tools http://ngeedata.iarc.uaf.edu/wiki/Tool_list
- computer + charger
- field laptop + charger
- fish tape
- BF5 sensor + mount+ cable +cable conduit+ electrical accessories
- CNR4 heater+ cable
- SW12V BORROWED FROM NGEE, MUST REPLACE IF I USE IT
- field book
- copy of wiki
Clothes
- raincoat
- rain pants
- sourdough jacket
- warm hats
- gloves and mittens
- blue muck boots
- winter hiking boots
- fleece pants
- leggings
- orange fleece
- wool long sleeve
- socks, undies
- work pants
Other Gear
- -10 sleeping bag and stuff sack
- sleeping pad
- beverages
