Difference between revisions of "Pin Outs"
imported>Ekyoucha (Created page with "* 1990s PIR: PT06A-12-10S amphenol connector or PT06W-12-10S with a MS3420-4 and MS3420 sleeve * 1980s PIR: PT06W-10-6S amphenol connector * oldest 1980s (?) PIRs: What is t...") |
imported>Ekyoucha |
||
| Line 1: | Line 1: | ||
* 1990s PIR: PT06A-12-10S amphenol connector or PT06W-12-10S with a MS3420-4 and MS3420 sleeve | * 1990s PIR: PT06A-12-10S amphenol connector or PT06W-12-10S with a MS3420-4 and MS3420 sleeve | ||
| − | * 1980s PIR: PT06W-10-6S amphenol connector | + | PIR pin outs: |
| + | A radiometer thermopile low - black | ||
| + | C radiometer thermopile hi + red | ||
| + | D case thermistor required - white | ||
| + | E case thermistor required - green | ||
| + | F dome thermistor optional - brown | ||
| + | G dome thermistor optional - blue | ||
| + | H Case ground (shield?) | ||
| + | J not used | ||
| + | K not used | ||
| + | |||
| + | YSI 44031 (thermistor model) | ||
| + | |||
| + | * 1980s PIR: PT06W-10-6S amphenol connector with various MS3420 sleeves | ||
* oldest 1980s (?) PIRs: What is the pinouts for thises units? Answer from Eppley: | * oldest 1980s (?) PIRs: What is the pinouts for thises units? Answer from Eppley: | ||
It depends on the age of the PIR as the 6 pin connectors were used before the dome thermistors were included standard and then we switched to the 10 pins. | It depends on the age of the PIR as the 6 pin connectors were used before the dome thermistors were included standard and then we switched to the 10 pins. | ||
| − | However, certain customers continued to request the 6 pin in some cases. The wiring of the 6 pin PIR is probably | + | However, certain customers continued to request the 6 pin in some cases. The wiring of the 6 pin PIR is probably: |
| − | A: Thermopile (-) | + | A: Thermopile (-) black |
| − | B: Thermopile (+) | + | B: Thermopile (+) red |
| − | C: Case Thermistor | + | C: Case Thermistor white |
| − | D: Case Thermistor | + | D: Case Thermistor green |
| − | E: Instrument Ground or Dome Thermistor | + | E: Instrument Ground or Dome Thermistor brown |
| − | F: not used or Dome Thermistor | + | F: not used or Dome Thermistor blue |
Shield is the Ground | Shield is the Ground | ||
| − | |||
| − | |||
Revision as of 11:10, 29 June 2017
- 1990s PIR: PT06A-12-10S amphenol connector or PT06W-12-10S with a MS3420-4 and MS3420 sleeve
PIR pin outs: A radiometer thermopile low - black C radiometer thermopile hi + red D case thermistor required - white E case thermistor required - green F dome thermistor optional - brown G dome thermistor optional - blue H Case ground (shield?) J not used K not used
YSI 44031 (thermistor model)
- 1980s PIR: PT06W-10-6S amphenol connector with various MS3420 sleeves
- oldest 1980s (?) PIRs: What is the pinouts for thises units? Answer from Eppley:
It depends on the age of the PIR as the 6 pin connectors were used before the dome thermistors were included standard and then we switched to the 10 pins. However, certain customers continued to request the 6 pin in some cases. The wiring of the 6 pin PIR is probably:
A: Thermopile (-) black B: Thermopile (+) red C: Case Thermistor white D: Case Thermistor green E: Instrument Ground or Dome Thermistor brown F: not used or Dome Thermistor blue
Shield is the Ground
