Difference between revisions of "PIR Pin Outs"
Jump to navigation
Jump to search
imported>Ekyoucha |
imported>Ekyoucha |
||
| Line 22: | Line 22: | ||
**E: Instrument Ground or Dome Thermistor brown | **E: Instrument Ground or Dome Thermistor brown | ||
**F: not used or Dome Thermistor blue | **F: not used or Dome Thermistor blue | ||
| − | Shield is the Ground | + | **Shield is the Ground |
*Belden Cable 6 conductor twisted and shielded 20 or 22 awg | *Belden Cable 6 conductor twisted and shielded 20 or 22 awg | ||
Revision as of 10:22, 29 June 2017
1990s PIR: PT06A-12-10S amphenol connector or PT06W-12-10S with a MS3420-4 and MS3420 sleeve 1990s PIR pin outs:
- A radiometer thermopile low - black
- C radiometer thermopile hi + red
- D case thermistor required - white
- E case thermistor required - green
- F dome thermistor optional - brown
- G dome thermistor optional - blue
- H Case ground (shield?)
- J not used
- K not used
- YSI 44031 (thermistor model)
1980s PIR: PT06W-10-6S amphenol connector with various MS3420 sleeves
- oldest 1980s (?) PIRs: Emily asks: What are the pinouts for these units? Answer from Eppley:
It depends on the age of the PIR as the 6 pin connectors were used before the dome thermistors were included standard and then we switched to the 10 pins. However, certain customers continued to request the 6 pin in some cases. The wiring of the 6 pin PIR is probably:
- A: Thermopile (-) black
- B: Thermopile (+) red
- C: Case Thermistor required white
- D: Case Thermistor required green
- E: Instrument Ground or Dome Thermistor brown
- F: not used or Dome Thermistor blue
- Shield is the Ground
- Belden Cable 6 conductor twisted and shielded 20 or 22 awg
