Difference between revisions of "Dbm8"
Jump to navigation
Jump to search
imported>Ken |
imported>Ken |
||
Line 2: | Line 2: | ||
{{todo}} | {{todo}} | ||
+ | |||
+ | * '''TAKE SR50 cable''' to site, estimated 40-feet ('''but check design specs!''') | ||
+ | |||
=site logs= | =site logs= | ||
+ | |||
+ | == 14 June 2007, Ken I., Doug K. == | ||
+ | |||
+ | * net radiometer replaced | ||
+ | ** s/n 052046 | ||
+ | ** 14.6 uV/W-m^2 | ||
+ | ** 120 cm centerline sensor to ground | ||
+ | |||
+ | * SR50 -- cable missing, not replaced (had one, but too short) | ||
+ | |||
+ | * RMYoung & HMP45C cables put in flex conduit on tripod | ||
+ | |||
+ | * no GWS-YSI sensor, and no conduit was left for it | ||
+ | |||
+ | * AT shields braced with mast/enclosure bracket to strengthen | ||
+ | |||
+ | * antenna cable wrapped with nylon spiral wrap; no way to pull into conduit | ||
+ | |||
+ | * conduits '''wired''' (using tie-wire) to enclosure entry fittings to secure | ||
+ | |||
+ | * soil temp profile cable: added strain relief using hose clamp & cord; load was on the multiplexer terminals | ||
+ | |||
+ | * added cord inside enclosure to secure extra/loose cables inside | ||
+ | |||
+ | * replaced rain gauge | ||
+ | ** model: TR-525USW | ||
+ | ** s/n: 37655-1205 | ||
+ | ** collector/funnel secured with hose clamp | ||
+ | ** screen secured with electrical tape | ||
+ | |||
+ | |||
+ | |||
+ | |||
== 13 June 2007, Ken I., Doug K. == | == 13 June 2007, Ken I., Doug K. == |
Revision as of 11:19, 3 July 2007
Contents
Bullen Point met
site TODO list
- record as-built wiring of soil sensors
- Flex conduit as needed
- TAKE SR50 cable to site, estimated 40-feet (but check design specs!)
site logs
14 June 2007, Ken I., Doug K.
- net radiometer replaced
- s/n 052046
- 14.6 uV/W-m^2
- 120 cm centerline sensor to ground
- SR50 -- cable missing, not replaced (had one, but too short)
- RMYoung & HMP45C cables put in flex conduit on tripod
- no GWS-YSI sensor, and no conduit was left for it
- AT shields braced with mast/enclosure bracket to strengthen
- antenna cable wrapped with nylon spiral wrap; no way to pull into conduit
- conduits wired (using tie-wire) to enclosure entry fittings to secure
- soil temp profile cable: added strain relief using hose clamp & cord; load was on the multiplexer terminals
- added cord inside enclosure to secure extra/loose cables inside
- replaced rain gauge
- model: TR-525USW
- s/n: 37655-1205
- collector/funnel secured with hose clamp
- screen secured with electrical tape
13 June 2007, Ken I., Doug K.
- installed electric fence with 3 posts
- no time to fix site cables
- LOTS of fox scat around site, many chewed cables