Difference between revisions of "SS To Do Next Visit"
Jump to navigation
Jump to search
| Line 7: | Line 7: | ||
* change ss_soil soil moisture to period averaging method to reduce overranging | * change ss_soil soil moisture to period averaging method to reduce overranging | ||
* add leaf wetness sensor to geonor again? | * add leaf wetness sensor to geonor again? | ||
| + | * change sdi12 instruction for ss_ff_rad snow to output quality number... looks to be zero. | ||
| + | |||
====May 2021 Datapro remainder Items==== | ====May 2021 Datapro remainder Items==== | ||
* ss_geonor -- need to add charger | * ss_geonor -- need to add charger | ||
Revision as of 12:30, 26 May 2021
Contents
Publications List
2021
- Check 6m AT/RH wiring.
- I think we replaced it in March 2021 but it is still acting up so likely to be a cabling issue again.
Program Change
- change ss_soil soil moisture to period averaging method to reduce overranging
- add leaf wetness sensor to geonor again?
- change sdi12 instruction for ss_ff_rad snow to output quality number... looks to be zero.
May 2021 Datapro remainder Items
- ss_geonor -- need to add charger
- ss_soil_2 -- need to add sm_profile.dat and snow.dat to automated processing.
- ss_ff_rad -- need to add snow to automated processing.
2019
- bring out MD485 to tie in to network out there
May 2019
- check sr50a #2 maybe not working according to data.
2018
Fall List
- Photograph tag & equipment for:
- LICOR units (tower & forest)
- Property Tag 36113 (I think this may be Y Kim)
- Property Tag 36114 (I think this may be Y Kim)
- 3 CR1000s
- Property Tag 36104
- Property Tag 36106
- Property Tag 36117
- LICOR units (tower & forest)
- Might add a SR50A to the soil pit
- might add a SI111 to the soil pit
- might add a UPS for the heat flux logger system in case there are power problems
- the network switch connecting the toughbook to the LI7200 and the LI7200 to the fluxprocessor
- Need to find out OS version of tower wind master pro
- need to remove battery from sky cam laptop
- bring out NL100/200.
- error message associated with heat flux memory card... replace memory card.
- order a LiCor network cable for forest floor.
Summer List
- More PAR sensors and hardware for in-situ
- Polish Battery Backup System
- replace Loggernet computer
- bring out an NL100 or USB to serial adapter
- Submit PRs for Summer 2018 Instrument Recalibrations
- Vaisala HMP155s
- MetOne 010C
- Kipp & Zonen CNR4
- Late Fall recalibrations:
- LI-7200s
Ss soil has room on c5 for sdi12 rest or sr50a are on c3, c4 is open for other stuff.
- C5 -- SDI12 ID 8 = Shed
- C7 -- SDI12 ID 9 = Forest Floor Radiation Stand
Just moved cs616 to 5v to see if that does anything. Need to confirm this doesn't mess up and create noise in signals.
- Replace SR50A transducers
- Dig second pit for soil instruments
- clean up outdoor power cords
- waterproof a bit some of the tower blowers (might be as easy as more cable ties / tape to keep the white box deals right side up.
- I brought out a collection of one and two hole deals for securing loose cabling here and there in and out of the shed. That could be sorted out.
- connect those shop power strips and get one more for inside?
- buy and add more PAR top and bottom (4x and matching hardware)
- add another tipping bucket.
- bring solder out for ff atrh blower and electrical goo
