Difference between revisions of "Dbm6"
Jump to navigation
Jump to search
Line 6: | Line 6: | ||
= site logs = | = site logs = | ||
+ | |||
+ | == Sept 9 2008 1:20pm ADT Emily == | ||
+ | *Possible bear charging station (according to Sue at Kavik) but no visible damage. | ||
+ | *Install bear fence next year | ||
+ | *Sr50 distance to ground is 143 cm before trimming vegetation | ||
+ | *Trimmed vegetation and added bark below sensor | ||
+ | *New distance is ~140cm (data logger program read 148 cm) and so changed to 140 cm in program. | ||
== 13 Jun 2008 Emily & Ken == | == 13 Jun 2008 Emily & Ken == | ||
* snow sensor distance is ~148 cm, changed old value of 150cm to new value of 148cm. | * snow sensor distance is ~148 cm, changed old value of 150cm to new value of 148cm. | ||
+ | |||
Latest revision as of 12:36, 17 September 2008
Contents
TODO
- Check soil temperature,
- Measure distance from ground to snow sensor,
- reset antennae radio guy wires.
site logs
Sept 9 2008 1:20pm ADT Emily
- Possible bear charging station (according to Sue at Kavik) but no visible damage.
- Install bear fence next year
- Sr50 distance to ground is 143 cm before trimming vegetation
- Trimmed vegetation and added bark below sensor
- New distance is ~140cm (data logger program read 148 cm) and so changed to 140 cm in program.
13 Jun 2008 Emily & Ken
- snow sensor distance is ~148 cm, changed old value of 150cm to new value of 148cm.
03 Sept 2007, Ken I.
Transcribed EKY
- downloaded data, saved old program, updated new program
- site looks good
- antennae radio pole vertical but the guys are loose, need to reset
29 Aug 2007, Ken I
Transcribed EKY
- Tripod looks good
- Precip good
- Radiation pole, 1 guy detached
- reset radiation pole turn buckles and wired them to secure
- Net rad is level, 111 cm to ground from sensor, but grass is 10 cm higher, birch (?) to 15 cm higher
- SR50 is 148 cm to ground
- Rotated SR50 pole to secure to guy wire via tie wrap