Difference between revisions of "Dfm4"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
| − | + | = Site to do list = | |
| − | |||
| − | |||
| + | =Site Logs = | ||
| + | |||
| + | == May 2008 == | ||
Note EKY 6/6/08, Bob and Jeff visited this site in may 08 and fixed the antennae. Site is now transmitting data. | Note EKY 6/6/08, Bob and Jeff visited this site in may 08 and fixed the antennae. Site is now transmitting data. | ||
| + | |||
| + | == 16 Jun 2008 Emily & Ken == | ||
| + | *After reviewing data at Toolik, data shows damage to anemometer, hmp45c, and sr50 | ||
| + | *sr50 data went from 12 cm to 25 cm in one hour | ||
| + | *site visit indicated an animal (most likely a bear) ripped wires out of the instrument box: | ||
| + | **YSIx3 | ||
| + | **HMP45C | ||
| + | **anememoter | ||
| + | **blu/red wire from junction box | ||
| + | **sr50? | ||
| + | *SR50 distance (old) ~115 cm avg. | ||
| + | *replaced SR 50 | ||
| + | ** old s/n c5011 | ||
| + | ** new s/n c4387 | ||
| + | ** distance to ground is the same | ||
| + | *HMP45C head replaced | ||
| + | ** old s/n B0110061 | ||
| + | ** new s/n C1440007 | ||
| + | *loose wires, rewired all sensor wires that came loose out of box | ||
| + | |||
| + | *Also note that the trench for the cables running from the tipod to the snow sensor was dug up and buried cables/conduit is exposed. | ||
| + | * the bear also pulled the ysix3 and hmp45c out of its housing and out of the bottom of the box, but they were not broken | ||
Revision as of 14:11, 31 July 2008
Site to do list
Site Logs
May 2008
Note EKY 6/6/08, Bob and Jeff visited this site in may 08 and fixed the antennae. Site is now transmitting data.
16 Jun 2008 Emily & Ken
- After reviewing data at Toolik, data shows damage to anemometer, hmp45c, and sr50
- sr50 data went from 12 cm to 25 cm in one hour
- site visit indicated an animal (most likely a bear) ripped wires out of the instrument box:
- YSIx3
- HMP45C
- anememoter
- blu/red wire from junction box
- sr50?
- SR50 distance (old) ~115 cm avg.
- replaced SR 50
- old s/n c5011
- new s/n c4387
- distance to ground is the same
- HMP45C head replaced
- old s/n B0110061
- new s/n C1440007
- loose wires, rewired all sensor wires that came loose out of box
- Also note that the trench for the cables running from the tipod to the snow sensor was dug up and buried cables/conduit is exposed.
- the bear also pulled the ysix3 and hmp45c out of its housing and out of the bottom of the box, but they were not broken
