Difference between revisions of "Super-Site"
Jump to navigation
Jump to search
Line 7: | Line 7: | ||
# Install [http://numpy.scipy.org/ Numpy] | # Install [http://numpy.scipy.org/ Numpy] | ||
# Install [http://git-scm.com/ Git] | # Install [http://git-scm.com/ Git] | ||
− | # Install DHCP server for local network access on eth0 | + | # Install DHCP server for local network access on eth0 (wlan0, intel chipset installed on toughbook wasn't designed to serve as a wireless access point) |
− | # Install DNS Masq for supplying dns to local network (eth0 | + | # Install DNS Masq for supplying dns to local network (eth0 only) [http://www.thekelleys.org.uk/dnsmasq/doc.html dnsmasq website] |
# Manually configure IPTables for [https://help.ubuntu.com/community/Internet/ConnectionSharing internet connection sharing] | # Manually configure IPTables for [https://help.ubuntu.com/community/Internet/ConnectionSharing internet connection sharing] | ||
# Install Loggernet for Linux | # Install Loggernet for Linux |
Revision as of 13:54, 30 November 2010
Here's a page started by Bob. Not sure how often I'll be adding stuff but it's been on my to-do list. Thought I'd start with packages added to the toughbook.
Toughbook Setup
Toughbook is a CF-19 (small one with the touchscreen)
- Install Ubuntu 10.10
- Install Xinput Calibrator as per suggestions here
- Install Numpy
- Install Git
- Install DHCP server for local network access on eth0 (wlan0, intel chipset installed on toughbook wasn't designed to serve as a wireless access point)
- Install DNS Masq for supplying dns to local network (eth0 only) dnsmasq website
- Manually configure IPTables for internet connection sharing
- Install Loggernet for Linux
- Handy: this page on rpm to dem
- Handy: Ken's Notes
- Handy: Redhat vs. Debian naming convention
- Gist is to change the daemon command in csilgrnet, csildmp, csildep to something like this: start-stop-daemon --start --user loggernet --exec /opt/CampbellSci/LoggerNet/csilgrnet -- --run-as-daemon=true
- clone git repositories for datapro tools
cd ~/.ssh ssh-keygen -t rsa -C "bob" cat ~/.ssh/id_rsa.pub [paste key on github] cd ~/working_files/bin/py_datapro/ git clone git@github.com:frankohanlon/DataPro.git
- sftp datapro configs
- Buy a bluetooth keyboard/mouse
- set up sshd
- set up keys w/ toughbook & iarc.server
- Yet to be done:
- Install drivers (if needed for High power WiFi adapter)
- Dig out an old CRT monitor
- make insulated enclosure for laptop
- search/replace to get datapro scripts running on the new computer
- set up scp & data processing on the cron
- add sites to loggernet
- configure MD485s & NL100 for pakbus network
Things that may yet come in handy:
Things running locally on the cron: IP address posted to peeps.working_files/ss_status/
Sensors
To Do
- Figure out problems with Soil Moisture probes
- Figure out problem with soil heat flux plate