Difference between revisions of "2015 July Nome Trip"

From IARC 207 Wiki
Jump to navigation Jump to search
Line 5: Line 5:
 
* review programs again.
 
* review programs again.
 
* CR1000 for K3 site... add full program if time allows
 
* CR1000 for K3 site... add full program if time allows
 +
* CNR4 Bracket - locate
 +
* Precip bucket calibration unit -locate
  
 
===To bring back===
 
===To bring back===
Line 136: Line 138:
 
* Bring out a base radio to download data from all the sites.
 
* Bring out a base radio to download data from all the sites.
 
** need to track down 12 volt cig adapter
 
** need to track down 12 volt cig adapter
 +
 +
 +
Packing List:
 +
 +
 +
Trip Extras
 +
* hose clamps / tape / for securing 107 temperatures into old radiation shields
 +
 +
 +
 +
 +
Computer Package 1 (Campbell Scientific):
 +
* 2 serial cables
 +
* SC32B
 +
* Rugged Freewave Radio (unconfigured currently)
 +
* Waterproof Freewave Radio (unconfigured currently)
 +
* waterproof freewave cable
 +
* stub antenna
 +
 +
Computer Package 2 (Hobo)
 +
* small phillips screwdriver (to open hobo)
 +
* small flat head screwdriver (to slip out old hobo battery)
 +
* 2 temperature cables for Bear River Site (Kenji Council Site)
 +
* hobo for bear river site
 +
* USB cable to communicate with Hobo
 +
* extra CR2032 batteries for Anvil City Hobos
 +
 +
Anvil Mountain Repeater Package:
 +
* Anvil CR10X
 +
* 107 Probe
 +
* small diodes to Wind Speed sensor
 +
 +
Kigluaiks Repeater Package:
 +
* Kigluaiks CR10X
 +
* 107 Probe
 +
 +
Skookum Repeater Package:
 +
* CR10X Logger
 +
 +
 +
K2 Met Package:
 +
* Desiccant for radiometers
 +
* screw in stakes for guy wire anchors
 +
* guy wire pieces?
 +
*
 +
 +
K3 Mauze Package that is already in Nome:
 +
* SI-111 & Cable & Mount (on PEP)
 +
* CNR4 & Cable & Mount (on PEP)
 +
*
 +
 +
K3 Mauze Package for new radiation stuff:
 +
* CR1000 w/ program
 +
* power cord for CR1000 (run from CR10x)
 +
* cable protection for new sensor cable
 +
 +
 +
Electronics

Revision as of 08:52, 26 July 2015

PreTrip To Do

  • dessicant
  • load maps onto phone / touch pad
  • review programs again.
  • CR1000 for K3 site... add full program if time allows
  • CNR4 Bracket - locate
  • Precip bucket calibration unit -locate

To bring back

To Bring

  • Electricians putty
  • Temperature sensors for repeater sites
  • lithium backup battery w/ charger
  • Delorme Deal
  • Satphone
  • fieldbook
  • SR50As
  • maps for kigluaiks
  • toolbags
  • volt meter
  • 3 pieces 107 probe & radiation shield for the repeaters
  • gopro w/ chest mount
  • Chargers
    • USB for Gopro / delorme
    • phone
    • lithium battery
    • bluetooth speaker
  • CR2032 batteries for Kenji's Hobos
  • Diode for Anvil Mountain

To Buy

  • screw in anchors for radiation towers and 10 meter tripods


To grab from storage

  • Pepper Spray
  • hand maul for tower
  • pipe the right size is in there

Anvil Mountain

  • Add 107 Temperature for air temperature
    • modify program
  • Look at WS again
    • bring out a diode.
  • See about fixing HMP45c


Monday 7/27:

  • Fly to Nome
  • pick up vehicle
  • visit storage
    • pick up water jugs
    • cooler
      • get water @ hotel
    • get pepper spray (from store or storage depending)
  • get a cross arm & extra rod / pipe from nome storage for shrub site radiation
  • grocery store
    • yogurt & garbage snacks
    • coke etc
    • ice for cooler
  • get set up in Kougarok & download data from the sites over radio network.

Tuesday 7/28:

  • if there is time in the morning, run over to K2 Met and do required things there.
  • Take crew from Nome to K3 Mauze
  • Add a CR1000 and radiation sensors
  • bring cable protection
  • and PEP radiometers to site. (brown tape calibration information)

Wednesday 7/29:

  • If K2 is done then try to visit the Kigluaiks Site
  • If Kig site is inaccessible then visit Council: C1, Kenji's site, Skookum
  • Or, chill with rest of NGEE team
  • Return to Nome

Thursday 7/30:

  • Chill with rest of NGEE team
  • Spend night in Nome

=Friday 7/31:

  • Return to Fairbanks


Stuff to do: C1 Grid

  • Re-level precip bucket

Kenji Bear Creek:

  • replace hobo and soil surface / well temperature sensors

Skookum Pass

  • Replace CR10X w/ pakbus CR10X
    • program and update firmware in Fairbanks first... test...
  • add radiation shield for air temperature sensor

Anvil City

  • look in box to see what Chas left.

Kigulaiks

  • Replace CR10X w/ pakbus CR10X
    • program and update firmware in Fairbanks first... test...
  • add radiation shield for air temperature sensor
  • add PRT sensor for air temperature
    • bring out precision resistor for PRT

Anvil Mountain

  • Replace CR10X w/ pakbus CR10X
    • program and update firmware in Fairbanks first... test...
  • add radiation shield for air temperature sensor
  • add PRT sensor for air temperature
    • bring out precision resistor for PRT

K1 Burn

  • Download data over radio network

K2 Met

  • bring out supplies to firm up guy wire anchors for tower and radiation tower
  • examine tower to see if it is safe for climbing
  • download data
  • replace desiccant in radiometers
  • remove CR800

K3 Mauze Gulch

  • bring out cross arm and additional support for CNR4
  • remove CNR4 bracket from PEP?
  • SI-111 bracket for cross arm
  • download data
  • bring out CR1000 for radiation
  • wire to power CR1000 from existing CR10X


To Do in Fairbanks:


Packing List:


Trip Extras

  • hose clamps / tape / for securing 107 temperatures into old radiation shields



Computer Package 1 (Campbell Scientific):

  • 2 serial cables
  • SC32B
  • Rugged Freewave Radio (unconfigured currently)
  • Waterproof Freewave Radio (unconfigured currently)
  • waterproof freewave cable
  • stub antenna

Computer Package 2 (Hobo)

  • small phillips screwdriver (to open hobo)
  • small flat head screwdriver (to slip out old hobo battery)
  • 2 temperature cables for Bear River Site (Kenji Council Site)
  • hobo for bear river site
  • USB cable to communicate with Hobo
  • extra CR2032 batteries for Anvil City Hobos

Anvil Mountain Repeater Package:

  • Anvil CR10X
  • 107 Probe
  • small diodes to Wind Speed sensor

Kigluaiks Repeater Package:

  • Kigluaiks CR10X
  • 107 Probe

Skookum Repeater Package:

  • CR10X Logger


K2 Met Package:

  • Desiccant for radiometers
  • screw in stakes for guy wire anchors
  • guy wire pieces?

K3 Mauze Package that is already in Nome:

  • SI-111 & Cable & Mount (on PEP)
  • CNR4 & Cable & Mount (on PEP)

K3 Mauze Package for new radiation stuff:

  • CR1000 w/ program
  • power cord for CR1000 (run from CR10x)
  • cable protection for new sensor cable


Electronics