Difference between revisions of "Super Site Tower"

From IARC 207 Wiki
Jump to navigation Jump to search
Line 5: Line 5:
 
* small wire snipper
 
* small wire snipper
 
* flat head screw driver (medium sized)
 
* flat head screw driver (medium sized)
*  
+
* cable ties
 +
* crimping tool
 +
* wire trimmer
 +
 
  
 
===Extra Notes===
 
===Extra Notes===
 
* the cyberpower below the SS Toughbook may be at capacity.  Or who knows.  There was a power surge that tripped it, which brought the network down when the deal didn't come back up.
 
* the cyberpower below the SS Toughbook may be at capacity.  Or who knows.  There was a power surge that tripped it, which brought the network down when the deal didn't come back up.
 
* something to keep an eye on.  It coincided perhaps with an 8/21 visit.
 
* something to keep an eye on.  It coincided perhaps with an 8/21 visit.
 
+
* it is a recurring brown out but I'm not sure yet if it is hitting everything or just that UPS.
 +
* probably need an extension to reconnect the HMP power.
 
===Activity Log===
 
===Activity Log===
* 8/29 started
+
* 8/29  
 +
** re-routed all radiation sensors & temporary rewire
 +
** powered off AT/RH
 +
** the cnr4 heater/ventilators are off at the moment.... might be a good time to shorten up the cables to them, too...

Revision as of 15:46, 29 August 2016

To Purchase in town etc

  • 18-22 gauge red color spade connectors (in bulk) for power /ground terminal strips

Tools needed

  • small wire snipper
  • flat head screw driver (medium sized)
  • cable ties
  • crimping tool
  • wire trimmer


Extra Notes

  • the cyberpower below the SS Toughbook may be at capacity. Or who knows. There was a power surge that tripped it, which brought the network down when the deal didn't come back up.
  • something to keep an eye on. It coincided perhaps with an 8/21 visit.
  • it is a recurring brown out but I'm not sure yet if it is hitting everything or just that UPS.
  • probably need an extension to reconnect the HMP power.

Activity Log

  • 8/29
    • re-routed all radiation sensors & temporary rewire
    • powered off AT/RH
    • the cnr4 heater/ventilators are off at the moment.... might be a good time to shorten up the cables to them, too...