Spring 2017 visit

• Check out the status of the heater wiring for CNR4
  • is it even wired? to which ports?
  • change the program notes if wired
  • change program controls for heater
  • bring up couple SW12V
• change desiccant in CNR4
• stabilize underwater par sensor with second string for cleaning
• add terrestrial quantum to sensor wiring notes at top of program
• check what the calconnector looks like for lake PAR.
  • maybe need to buy a second one so can coordinate with calibration swaps
  • its reading negative because the sensor head was swapped wrong, but this isn't an issue.
• change notes in program where measure pressure to change CS100 to CS106
  • remove sea level offset
• get serial number for radios
• get height of terrestrial PAR
• check if pluvio is pointing north
• think about soil temps- at least find them
• install BF5 sensor
  • tripod is 9ft7in from tower. cable is 5m. so this should work out
  • bring some spare AC power line, inverters and plugs to set up power for heater.
• set up evap pan
• organize the enclosure
  • zip ties of many colors and sizes
  • wires of many colors (mostly red and black)
  • white wire connector things

at toolik:

• go through all metadata - remember the comments column

to bring

• computer + charger
• field laptop + charger

Clothes

• raincoat
• rain pants
• sourdough jacket
• warm hats
• gloves and mittens
• blue muck boots
• winter hiking boots
• fleece pants
• leggings
• orange fleece
• wool long sleeve
• socks, undies

Other Gear

• -10 sleeping bag and stuff sack
• sleeping pad
• beverages