Difference between revisions of "NGEE Teller Top Notes"

From IARC 207 Wiki
Jump to navigation Jump to search
Line 27: Line 27:
 
===Soil 2017===
 
===Soil 2017===
 
* 2017 heat flux plates prior to fall were being measured on wrong channel.
 
* 2017 heat flux plates prior to fall were being measured on wrong channel.
* 2017-03-12 02:00:00 Upper heat flux plate has a value that isn't ever flipped by the qc program.  So just a note that need to remove it manually.
+
* 2017-03-12 02:00:00 Upper heat flux plate has a value that isn't ever flipped by the qc program.   
* 2017-03-12 02:00:00 Lower heat flux plate has a value that isn't ever flipped by the qc program.  So just a note that need to remove it manually.
+
* 2017-03-12 02:00:00 Lower heat flux plate has a value that isn't ever flipped by the qc program.   
 
* Easy Perl one liners to accomplish this:
 
* Easy Perl one liners to accomplish this:
 
  perl -pi -e 's/"2017-03-12 02:00:00",149.2/"2017-03-12 02:00:00",6999.00/g;' $TT_SOIL_DIR/outputs/SoilPit_HeatFlux_Lower.csv
 
  perl -pi -e 's/"2017-03-12 02:00:00",149.2/"2017-03-12 02:00:00",6999.00/g;' $TT_SOIL_DIR/outputs/SoilPit_HeatFlux_Lower.csv

Revision as of 09:10, 18 May 2018

  • Partway through processing soil.

Met 2017

  • HMP155 August 2017
    • failure looks legit... not a data gap.
  • HMP155 Cuts out on 10/25 8:00
    • replaced AT portion with new AT thermistor.
    • DP & RH left NAN
  • HMP155 replaced on March 2018 visit
  • Rain corrected through most recent download.
  • Wind Speed / Direction
    • Propeller replaced 6/28/2017
    • No Rime fall 2017

Met 2018

  • Wind
    • all rime conditions corrected for through 3/2018 in QC spreadsheet.
  • Rain NAN through March visit.

Radiation 2017

  • There is a gap 10/2/2017 0:00 to 10/2/2017 22:00
    • I think this is when we removed the sensor from the field to change the desiccant.

Radiation 2018

  • All good through March visit.
    • There is a weird thing in 2018 where the lower SW has values higher than the upper SW. I assume this is due to snow/ frost up top. Perhaps related to how close the snow surface is to the sensor this year resulting in a lower wind speed later in the winter.

Soil 2017

  • 2017 heat flux plates prior to fall were being measured on wrong channel.
  • 2017-03-12 02:00:00 Upper heat flux plate has a value that isn't ever flipped by the qc program.
  • 2017-03-12 02:00:00 Lower heat flux plate has a value that isn't ever flipped by the qc program.
  • Easy Perl one liners to accomplish this:
perl -pi -e 's/"2017-03-12 02:00:00",149.2/"2017-03-12 02:00:00",6999.00/g;' $TT_SOIL_DIR/outputs/SoilPit_HeatFlux_Lower.csv
perl -pi -e 's/"2017-03-12 02:00:00",140.8/"2017-03-12 02:00:00",6999.00/g;' $TT_SOIL_DIR/outputs/SoilPit_HeatFlux_Upper.csv
  • 2017 Soil pit soil moisture -- all corrected
  • 2017 Soil heat flux plates also all corrected
  • with Vlad determined only good VATP are 2/5/25/50/60/100

Soil 2018

  • 2018 soil pit soil moisture -- all corrected through most recent visit

Snow 2018

  • Snow temperature profile
    • Weird shift (looks like mux wonky 1/22 to 1/28/2018)