Difference between revisions of "2021 NGEE Nome September Trip"
Jump to navigation
Jump to search
(Created page with "===Day 1=== * Fly to Nome * Get gear from container * start batteries charging * if time run out to Teller and set up GPS to log at GCP / install new PT for Teller SW / Make a...") |
|||
| Line 24: | Line 24: | ||
** check level of radiometer & precip buckets | ** check level of radiometer & precip buckets | ||
** change out transducers on snow sensors | ** change out transducers on snow sensors | ||
| − | + | ===Snow setup inventory === | |
| − | * Data logger | + | * CR1000 Data logger |
| − | * 12v battery | + | * Instrument Box |
| + | * 2x FAI, 1x Nome 12v battery | ||
* small solar panel | * small solar panel | ||
| − | * charge controller | + | * 3x charge controller |
* 3pcs SR50A snow depth sensor | * 3pcs SR50A snow depth sensor | ||
* 1-2 pcs 4m snow stand | * 1-2 pcs 4m snow stand | ||
| Line 34: | Line 35: | ||
*** need to consider weight... | *** need to consider weight... | ||
* shorter snow stand can be the usual | * shorter snow stand can be the usual | ||
| + | * Anemometers need bearing change out | ||
| + | * Anemometers... track down cross arms for them or some such. | ||
| + | ====Have on hand in Fairbanks==== | ||
| + | * 3x CR1000 Data logger | ||
| + | * 3x Instrument box | ||
| + | * 2x Batteries | ||
| + | ====Have on hand in Nome==== | ||
| + | * 1x batteries | ||
| + | ====PR Processed and waiting for==== | ||
| + | * Pipe brackets for snow stands are at Lowes. (I took a photo) | ||
| + | |||
| + | ===Teller CAS Bonus=== | ||
| + | * CR800 Logger | ||
| + | * Tipping bucket | ||
| + | * Air Temperature | ||
| + | * Radiation Shield | ||
| + | * Instrument Box | ||
| + | * Battery | ||
| + | * Solar Panel | ||
| + | * Tipping Bucket Stand | ||
| + | |||
| + | ====To fix out there==== | ||
| + | * New dry pit using other station's hardware? | ||
| + | * Do something different with their solar panel? | ||
| + | |||
| + | ====Have on hand in Fairbanks==== | ||
| + | * 1x CR800 | ||
| + | * Radiation shield | ||
| + | * | ||
| + | ====Have on hand in Nome==== | ||
| + | * 1x battery | ||
| + | * 1x | ||
| + | ====PR Needed==== | ||
| + | |||
| + | ====To Make==== | ||
| + | * Air temperature sensor | ||
| + | |||
| + | |||
| + | ====Itemized Room 112 current inventory==== | ||
| + | * 4x radiation shield | ||
| + | * 6x SR50A snow sensor in boxes | ||
| + | * 3x SR50A brackets (verify we haev all parts) | ||
| + | * 2x Judd sensors | ||
| + | * 3x aneometer cables | ||
| + | * 3x CR1000 | ||
| + | * 3x instrument boxes | ||
| + | * 8x SR50A cables | ||
| + | * 2-3x Air Temp cables | ||
| + | * 4x charge controller | ||
| + | * thing of flex conduit | ||
| + | * couple RM Young anemometers to pillage | ||
| + | * radiation shield in need of Ubolts (1/4" size) | ||
| + | * old rain gage parts | ||
Revision as of 10:23, 4 August 2021
Contents
Day 1
- Fly to Nome
- Get gear from container
- start batteries charging
- if time run out to Teller and set up GPS to log at GCP / install new PT for Teller SW / Make a discharge measurement
- Would be nice to grab the CR6 (& enclosure) from conex and use it in a place with wifi to get CR6 driver installed.
Day x
- Teller m47 CAS
- Download Data
- setup new tiny station
- precip bucket stand
- 3x pieces of pipe
- 2x screed stake
- 1x three way deal
- 2x hose clamps
- hang Airtemp
- mount tiny solar panel
- extra battery
- charge controller
- radiation shield for new air temp
- precip bucket stand
Day X
- Visit Teller Basin
- Download data
- check level of radiometer & precip buckets
- change out transducers on snow sensors
Snow setup inventory
- CR1000 Data logger
- Instrument Box
- 2x FAI, 1x Nome 12v battery
- small solar panel
- 3x charge controller
- 3pcs SR50A snow depth sensor
- 1-2 pcs 4m snow stand
- Several snow stand models. 4m could be 8' 4x4 plus 10' 1" pipe vertical with 5' pipe horizontal with 90 degree cross piece. Then to maintain vertical angle iron on two sides plus guy wires on the other two sides. Think about how long for the angle iron...
- need to consider weight...
- Several snow stand models. 4m could be 8' 4x4 plus 10' 1" pipe vertical with 5' pipe horizontal with 90 degree cross piece. Then to maintain vertical angle iron on two sides plus guy wires on the other two sides. Think about how long for the angle iron...
- shorter snow stand can be the usual
- Anemometers need bearing change out
- Anemometers... track down cross arms for them or some such.
Have on hand in Fairbanks
- 3x CR1000 Data logger
- 3x Instrument box
- 2x Batteries
Have on hand in Nome
- 1x batteries
PR Processed and waiting for
- Pipe brackets for snow stands are at Lowes. (I took a photo)
Teller CAS Bonus
- CR800 Logger
- Tipping bucket
- Air Temperature
- Radiation Shield
- Instrument Box
- Battery
- Solar Panel
- Tipping Bucket Stand
To fix out there
- New dry pit using other station's hardware?
- Do something different with their solar panel?
Have on hand in Fairbanks
- 1x CR800
- Radiation shield
Have on hand in Nome
- 1x battery
- 1x
PR Needed
To Make
- Air temperature sensor
Itemized Room 112 current inventory
- 4x radiation shield
- 6x SR50A snow sensor in boxes
- 3x SR50A brackets (verify we haev all parts)
- 2x Judd sensors
- 3x aneometer cables
- 3x CR1000
- 3x instrument boxes
- 8x SR50A cables
- 2-3x Air Temp cables
- 4x charge controller
- thing of flex conduit
- couple RM Young anemometers to pillage
- radiation shield in need of Ubolts (1/4" size)
- old rain gage parts
