GP

Overview

This is the first utility program given to us by the programmers at EE Internet. Turns out this program just does the html pages and not the graphs. So, in some ways it is quite similar to the program Crane wrote except without the figure generating capability.

Required Packages

To run it you'll need to install two extra python packages:

• Kid -- A simple and pythonic XML template language, the Kid package is the one that reads through the template pages looking for sensor variables and plugs values in to those locations. Look at stationInclude.kid for example in a web browser to get a taste for the way Kid does things.
• Pytz -- A timezone and time helper package
• ConfigParser -- A configuration file reader (reads the .ini file and places the values found in it into the equivalent of read only perl hash). To use it there is a first order sectional variable such as [Main] and then kind of subvariables in the section such as configDir

Hardcoded Filenames

These should be located in the configuration directory (variable configDir in the .ini file):

• stationDiag.kid (case sensitive, this is the html template for the diagnostic page)
• stationInclude.kid (case sensitive, this is the html template for the center frame on the current website layout)
• stationPage.kid (case sensitive, this is a currently unused - at least on the public werc site- alternate html template)
• TemplateMap-dot.profile (The contents of this file are shown below, maps loggernet data file variables to the variable names found in the template pages)

Program Execution and Background

Instruction for installation are on the python page. To run gp from the command line you give python the input script name and also the name/location of an initialization file:

$ python gp.py ADOT/dot.ini

This setup was modified by Bob after the materials we got from the EEI people. For this run I copied everything off the EEI page and put it all into the directory

/work/python/gws/gp

Important directories you'll need full and be filling:
This is where the gp.py created html will go. On your first run directories will be created for each station.

/work/python/gws/gp/ADOT/html  

This is where all of the source data files from loggernet are contained. There is no directory structure here, everything is lumped into one directory.

/work/python/gws/gp/ADOT/data

It appears this directory, although listed in the configuration file, is not currently used by gp.py... but it may be used by graph.py

/work/python/gws/gp/ADOT/plots 

In addition, for the first run there is some code at the end of gp.py that tries to send an email. I commented that section out (lines 314 to 358 in revision 143 of gp.py).

Sample .ini file

Here's a working initialization file (dot.ini from the EEI server).

[Main]
networkName = ADOT
# Where the configuration files lie
configDir = /work/python/gws/gp/ADOT
# File with all the station information
stationInfoCsv = StationInfo.csv
# Directory containing the template files
templateDir = /work/python/gws/gp/ADOT
# The base dir for rendered files
outputDirBase = /work/python/gws/gp/ADOT/html
# Base URL of the data files (http://, ftp://, file:///home/data, etc)
#dataFileBaseURL = http://werc.engr.uaf.edu/~ken/nslope-adot/
# dataFileBaseURL = http://www.gwscientific.com/remote/adot/
dataFileBaseURL = file:///work/python/gws/gp/ADOT/data/
# Name of the diagnostics files
diagOutputName = adot-diag.html
# Are we generating the "stripped down" include files?
generateInclude = True
# Where are the graphs going?
graphOutputDirBase = /work/python/gws/gp/ADOT/plots
diagURL = http://www.eeinternet.com/dot/html/adot-diag.html
baseStationOrder = bullen,foothills

[DataRecency]
threshold = 0.25
notifyEmail = fnkci@uaf.edu,jkugler@eeinternet.com

[bullen]
baseStationName = Bullen Point Project
stationOrder = DBM1,DBM2,DBM3,DBM4,DBM5,DBM6,DBM7,DBM8,DBR1,DBR2,DBR3,DBR4,DBR5

[foothills]
baseStationName = Kuparuk Foothills Project
stationOrder = DFM1,DFM2,DFM3,DFM4,DFM5,DFR1,DFR2,DFR3

Sample StationInfo.csv File

So, you can get the feeling from reading the ADOT StationInfo.csv file below that all of this info gets used in various ways in the junk outputted to the html pages. Also, line 1 is a list of the keys. Row 2 Column 1 is another key and then key values march across the columns to the right like a multi-dimensional hash:

StationName,PakbusID,StationDescriptiveName,StationLocationDescription,Latitude,Longitude,MagneticDeclination(East),ElevationFt,ElevationM,DataFileDirectory,DataFileNameBase,DataFileSuffixes,OutputDir,TemplateMap
DBM1,201,Accomplishment Creek Met,"Accomplishment Ck, below lake at pass to Rubicon",N 68 24.696,W 148 8.190,22.6,4833,1474.065,,DBM1_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DBM1,dot
DBM2,202,Ribdon Met,Upper Rubicon,N 68 38.548,W 147 21.107,23.1,4648,1417.64,,DBM2_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DBM2,dot
DBM3,203,Juniper Met,Upper Juniper Ck,N 69 4.570,W 146 30.294,23.8,4324,1318.82,,DBM3_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DBM3,dot
DBM4,204,Sag-Ivishak Met,"Close to snow survey site UP1, aka FT1",N 69 12.933,W 148 33.116,22.9,1414,431.27,,DBM4_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DBM4,dot
DBM5,205,Upper Kad Met,Kadleroshilik uplands,N 69 32.968,W 147 56.505,23.5,686,209.23,,DBM5_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DBM5,dot
DBM6,206,Kavik Met,Kavik camp,N 69 40.402,W 146 54.034,24.1,649,197.945,,DBM6_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DBM6,dot
DBM7,207,Lower Kad Met,"Kadleroshilik River, near the old runway",N 70 4.406,W 147 39.000,23.8,78,23.79,,DBM7_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DBM7,dot
DBM8,208,Bullen Met,South of Bullen Pt,N 70 4.792,W 146 49.166,24.3,86,26.23,,DBM8_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DBM8,dot
DBR1,211,TBD,TBD,,,,,,,DBR1_,"",DBR1,dot
DBR2,212,Ribdon Rep,Somewhere around Lupine valley?,N 68 36.337,W 147 23.716,23.2,N/A,N/A,,DBR2_,"HrlyAtms.dat,HrlyDiag.dat",DBR2,dot
DBR3,213,Pogopuk Rep,Between Gilead Ck and Niviak Pass,N 69 17.369,W 146 22.990,23.3,N/A,N/A,,DBR3_,"HrlyAtms.dat,HrlyDiag.dat",DBR3,dot
DBR4,214,Kavik Rep,"South of Kavik Camp, next to winter trail",N 69 37.893,W 146 52.889,23.4,1436,437.98,,DBR4_,"HrlyAtms.dat,HrlyDiag.dat",DBR4,dot
DBR5,215,Franklin Bluffs Rep,"Franklin Bluffs, NE side",N 69 48.633,W 148 19.540,23.1,875,266.875,,DBR5_,"HrlyAtms.dat,HrlyDiag.dat",DBR5,dot
DFM1,601,South White Hills Met,WERC HV5 snowsurvey site,N 69 12.043,W 149 33.508,22.4,962,293.41,,DFM1_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DFM1,dot
DFM2,602,White Hills Met,WERC White Hills previous repeater site,N 69 29.187,W 149 49.284,22.5,,,,DFM2_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DFM2,dot
DFM3,603,North White Hills Met,Between lake and stream to NNE of White Hills,N 69 42.892,W 149 28.227,22.6,276,84.18,,DFM3_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DFM3,dot
DFM4,604,North West Kuparuk Met,WERC H03 snowsurvey site,N 69 56.851,W 149 55.014,22.7,406,123.83,,DFM4_,"HrlyAtms.dat,HrlyDiag.dat,HrlySubs.dat",DFM4,dot
DFM5,605,TBD,TBD,,,,,,,DFM5_,"",DFM5,dot
DFR1,611,Kak Rep,Kakukturat Mtn,N 69 4.357,W 149 30.870,22.3,1667,508.435,,DFR1_,"HrlyAtms.dat,HrlyDiag.dat",DFR1,dot
DFR2,612,Slope Mnt Rep,Slope Mtn Repeater Site (relocated to top),N 68 44.448,W 149 1.989,,3858,1176.69,,DFR2_,"HrlyAtms.dat,HrlyDiag.dat",DFR2,dot
DFR3,613,Shell Pingo Rep,Shell Pingo Top,N 70 1.234,W 147 40.903,23.8,408,124.44,,DFR3_,"HrlyAtms.dat,HrlyDiag.dat",DFR3,dot

Sample Variable Mapping file

The contents of TemplateMap-dot.profile:

# DATA_FILE_NAME = templateName
TIMESTAMP = timeStamp
WindSpeed_WVc(1) = windSpeedAvg, Avg Wind Speed
WindSpeed_WVc(2) = windDirection, Wind Direction
WindSpeed_Max = windSpeedMax, Max Wind Speed
batt_volt_Avg = batteryVoltage, Battery Voltage
SolarPnlV_Avg = solarPanelVoltageAvg, Avg Solar Panel Voltage
PanelT = panelTemp, Panel Temperature
CRNT_AT_Avg = airTempAvg, Avg Air Temperature
CRNT_RH_Avg = relativeHumidityAvg, Avg Relative Humidity
CRNT_DP_Avg = dewTempAvg, Avg Dew Point
Precip_Tot = totalPrecipitation, Total Precipitation
SnowDepth_Avg = snowDepthAvg, Avg Snow Depth
Therm_degC(1) = soilSurfaceTemp, Soil Surface Temperature
Therm_degC(4) = soilProfileSurface, 0 cm
Therm_degC(5) = soilProfileOne, 5 cm
Therm_degC(6) = soilProfileTwo, 10 cm
Therm_degC(7) = soilProfileThree, 15 cm
Therm_degC(8) = soilProfileFour, 20 cm
Therm_degC(9) = soilProfileFive, 40 cm
Soil_Moisture_1 = SoilMoistureOne, 5 cm
Soil_Moisture_2 = SoilMoistureTwo, 20
Soil_Moisture_3 = SoilMoistureThree, 40 cm

In this template file, Column 1 is found in header at the top of the file downloaded using LoggerNet. Column 2 is the corresponding variable name found in the template files: stationDiag.kid, stationInclude.kid, stationPage.kid

Fleshing out more thoughts

Will continue fleshing this out but had some more thoughts to add. So, there are generally five parts of input:

1. the .ini, which controls general directory locations, stations to process, station groupings etc.
2. stationinfo.csv which contains station specific information (including data input file names)
3. the .dat files (listed in stationinfo.csv)
4. the html templates (*.kid). The html templates are viewable in a web browser they just have variable anchors in place of real numbers like:

General Station Info:
${si['StationDescriptiveName']}
si['timeDiff']
${si['Latitude']}
${si['Longitude']}
${si['ElevationFt']}
${si['StationName']}

${format(0, ms2mph(lr.windSpeedAvg))}
${format(0, lr.windDirection)}
${lr.timeStamp}
and quite a few more

turned into regular html using the python package kid.

1. another key file that basically contains aliases between variables common to each station which may have different names in the specific .dat file (like different ways of identifying air temperature for example).

So, changing the way plots are displays probably involves copying and then modifiying one of html templates. This could also allow annotations to be included in a separate include for example. Doing some early QA/QC stuff is even easier. Just write a new script (or point to datasets QA/QCed from the O.O. based file system Ken's been working on) that does the qaqc on the data and puts it all into a new file that has a first level of processing done to it. No need to change this program at all. The things that would change would be the .ini and stationinfo file with the general gp.py framework remaining in place.
So, for html changes (changing how figures are shown and adding annotation text) there will be at least a minimal amount of coding required to modify gp.py or gp_util.py but for data changes that can all be done through the .ini files.
I guess additionally, to get older cr10x data to work with this system wouldn't be a giant deal. The julian date & time would need to be changed into a regular format as the table based is and the arrays would each need to go into their own data file but otherwise, not to much required.