Kougraok M64
Revision as of 14:52, 19 August 2016 by 66.58.163.81 (talk)
Tape Color is Green
Contents
In NGEE Container:
- Tripod base with green tape.
- Requires 1.25" schedule 40 pipe mast
In UAF Storage
- 1" x 3' aluminum pipe, three pieces
- 2 pipe wrenches
- large cable ties
- small cable ties
- fish tape
- 4 dog anchors
- saw
- grease
- anti oxidizing grease for electrical connections
- a bunch of hose clamps (including for precip bucket
- Bosch drill
- GIPL drill bit
Sensors in UAF storage
- Tipping bucket
- GIPL VATP
To Buy in Nome
- At Grizzly Hardware pick up a 1.25" schedule 40 pipe threaded on one side
===To buy in Fairbanks
- 1" topper for tripod past
- 1" to 1.25" coupler to replace one used at teller top site
Cross arm situation
- Use short 1" Aluminum pipe for precip stand at site. Have three of these in the UAF Nome storage as well as the brackets required.
- the hose clamps for the site are in Nome along with some other items.
To ship from Fairbanks
- 2 pcs 12V batteries
Sensors
- Met:
- HMP155AC (@1.5 meters)
- radiation shield
- RM Young @ 3meters
- Barometric Pressure
- CNR4 for Net Radiation
- 3 NDVI sensors
- 3 other radiation sensors
- skin temperature
- HMP155AC (@1.5 meters)
- Soil only applicable if we build at M64 rather than Pilgrim Hot Springs
- 5 soil moisture
- 4 thermal conductivity / specific heat
- GIPL VATP
- bringing out 2 batteries for this site
Extras
- Using NGEE tripod in GIPL Upark storage
- Need cross arm for Net Radiation
- Still need to put precip stand together for tipping bucket
- still ned to sort out battery box for here.