SS To Do Next Visit

Might add a SR50A to the soil pit
might add a SI111 to the soil pit
might add a UPS for the heat flux logger system in case there are power problems
- the network switch connecting the toughbook to the LI7200 and the LI7200 to the fluxprocessor
Need to find out OS version of tower wind master pro
need to remove battery from sky cam laptop
bring out NL100/200.

- https://catalog.orientalmotor.com/viewitems/mb-series-ac-centrifugal-fans-blowers/mb-series-50mm-centrifugal-fans-blowers
More PAR sensors and hardware for in-situ
Polish Battery Backup System
replace Loggernet computer
- bring out an NL100 or USB to serial adapter
Submit PRs for Summer 2018 Instrument Recalibrations
- Vaisala HMP155s
- MetOne 010C
- Kipp & Zonen CNR4
Late Fall recalibrations:
- LI-7200s

Ss soil has room on c5 for sdi12 rest or sr50a are on c3, c4 is open for other stuff.

Just moved cs616 to 5v to see if that does anything. Need to confirm this doesn't mess up and create noise in signals.

Replace SR50A transducers
Dig second pit for soil instruments
clean up outdoor power cords
waterproof a bit some of the tower blowers (might be as easy as more cable ties / tape to keep the white box deals right side up.
I brought out a collection of one and two hole deals for securing loose cabling here and there in and out of the shed. That could be sorted out.
connect those shop power strips and get one more for inside?
buy and add more PAR top and bottom (4x and matching hardware)
add another tipping bucket.
bring solder out for ff atrh blower and electrical goo

Contents