NGEE Teller SW Notes

Latest

• Officially processed through 10/2017
• Partway through processing to 6/15.
• hoping to establish stage/discharge curve in 2018

Stage 2016

8/13/2016 3:00	PTs offset
9/14/2016 22:00	PT1 Position Reset & PT2 Removed

Stage 2017

4/1/2017 3:00	Station Turned back on, PT2 in place further downstream
10/1/2017 20:00	PT2 Removed
4/28/2017 1:50 shift in pt2? then 

Site Downloads / visits:

• Bob 4/21/2016 (CR1000)
• Lily 7/13/2016 (CR1000)
• Bob/Lily 8/12/2016 (CR1000)
• Bob 9/14/2016
• Bob 4/1/2017
• Bob 5/2017
• Bob/Lily 10/1/2017
• Bob 3/30/2018
• Bob 6/13 & 15/2018

From Computer Notes

Need to put into a spreadsheet pressure transducer value / date / manual stage reading.... need to review notes.

Related: discharge measurements
Related: Get manual stage & discharge measurements into UTC time.

Then once that is complete can look at using 
/var/site/uaf_sp/bin/teller_sw.sh
and the step utility function to correct everything to proper heights.
...should think about gedit plug ins too to make it more like xed.

Original Google Doc:

• https://docs.google.com/spreadsheets/d/159Q7kFOTAE0pZyx2WgFBhe4qVnLEEM8diSVuSYGRkjE/edit#gid=1602029777

Summary Google Doc:

• https://docs.google.com/spreadsheets/d/1gxLKzjoDvJkFmkDe0SVBhRRbokB-rvEpH77nN8cyLo0/edit#gid=1602029777

2/8: So.... including precip helps but there is still a period in september / october 2016 that confuses me with the diurnal signal looking more like air temperature driven.  Emily and I sort of think that the heating of the cable might be playing a role here but I haven't looked too hard yet.